[PATCH v3 3/6] arm64: dts: imx8mp-var-som: Move UART2 description to Symphony carrier

[Stefano Radaelli <stefano.radaelli21@gmail.com>]

The VAR-SOM-MX8MP module does not provide an onboard debug console.
UART2 is routed and exposed only on the Symphony carrier board, while
custom carrier designs may choose to expose a different UART.

Move the UART2 node from the SOM device tree to the
imx8mp-var-som-symphony.dts, keeping the SOM dtsi limited to hardware
present on the module itself.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts  | 18 ++++++++++++++++++
 .../boot/dts/freescale/imx8mp-var-som.dtsi     | 18 ------------------
 2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 361e6122bdc3..291f65e36865 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -9,6 +9,10 @@ / {
 	model = "Variscite VAR-SOM-MX8M-PLUS on Symphony-Board";
 	compatible = "variscite,var-som-mx8mp-symphony", "variscite,var-som-mx8mp", "fsl,imx8mp";
 
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -68,6 +72,13 @@ usb3-sata-sel-hog {
 	};
 };
 
+/* Console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
 /* SD-card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -95,6 +106,13 @@ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
 		>;
 	};
 
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 158a78ec9656..5bba91dcef17 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -15,10 +15,6 @@
 / {
 	model = "Variscite VAR-SOM-MX8M Plus module";
 
-	chosen {
-		stdout-path = &uart2;
-	};
-
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0xc0000000>,
@@ -206,13 +202,6 @@ ldo5: LDO5 {
 	};
 };
 
-/* Console */
-&uart2 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_uart2>;
-        status = "okay";
-};
-
 /* eMMC */
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -267,13 +256,6 @@ MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
 		>;
 	};
 
-	pinctrl_uart2: uart2grp {
-	        fsl,pins = <
-		        MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
-			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
-- 
2.47.3