From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>,
Linus Walleij <linusw@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-gpio@vger.kernel.org, linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] ARM: dts: allwinner: Replace status "failed" with "fail"
Date: Thu, 25 Dec 2025 18:36:15 +0800 [thread overview]
Message-ID: <20251225103616.3203473-5-wens@kernel.org> (raw)
In-Reply-To: <20251225103616.3203473-1-wens@kernel.org>
The device tree bindings specify using "fail", not "failed".
Fix up all the ones that are wrong.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
---
arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts | 2 +-
arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts | 2 +-
arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts | 2 +-
arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index 63e77c05bfda..f2413ba6a858 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -112,7 +112,7 @@ axp209: pmic@34 {
&i2c1 {
/* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
+ status = "fail";
};
&i2c2 {
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index c32596947647..e0c7099015da 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -96,7 +96,7 @@ axp209: pmic@34 {
&i2c1 {
/* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
+ status = "fail";
};
&i2c2 {
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 5bce7a32651e..5dfd36e3a49d 100644
--- a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -170,7 +170,7 @@ hdmi_out_con: endpoint {
&i2c0 {
/* pull-ups and devices require AXP221 DLDO3 */
- status = "failed";
+ status = "fail";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index b32b70ada7fd..fefd887fbc39 100644
--- a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -90,7 +90,7 @@ hdmi_out_con: endpoint {
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
- status = "failed";
+ status = "fail";
};
&i2c1 {
--
2.47.3
next prev parent reply other threads:[~2025-12-25 10:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-25 10:36 [PATCH 0/4] ARM: dts: allwinner: Fix remaining DT validation errors Chen-Yu Tsai
2025-12-25 10:36 ` [PATCH 1/4] dt-bindings: media: sun4i-a10-video-engine: Add interconnect properties Chen-Yu Tsai
2025-12-25 18:25 ` Jernej Škrabec
2025-12-30 17:46 ` Rob Herring (Arm)
2025-12-25 10:36 ` [PATCH 2/4] dt-bindings: pinctrl: sunxi: Allow pinmux sub-pattern with leading numbers Chen-Yu Tsai
2025-12-25 18:36 ` Jernej Škrabec
2026-01-02 22:21 ` Rob Herring (Arm)
2025-12-25 10:36 ` [PATCH 3/4] ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property Chen-Yu Tsai
2025-12-25 18:37 ` Jernej Škrabec
2025-12-25 10:36 ` Chen-Yu Tsai [this message]
2025-12-25 18:49 ` [PATCH 4/4] ARM: dts: allwinner: Replace status "failed" with "fail" Jernej Škrabec
2025-12-25 12:25 ` [PATCH 0/4] ARM: dts: allwinner: Fix remaining DT validation errors Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251225103616.3203473-5-wens@kernel.org \
--to=wens@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).