From: Rob Herring <robh@kernel.org>
To: James Calligeros <jcalligeros99@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, asahi@lists.linux.dev
Subject: Re: [PATCH v2 1/7] ASoC: dt-bindings: convert tdm-slot to YAML
Date: Mon, 29 Dec 2025 19:35:04 -0600 [thread overview]
Message-ID: <20251230013504.GB3037280-robh@kernel.org> (raw)
In-Reply-To: <20251221-tdm-idle-slots-v2-1-ed4d96413aec@gmail.com>
On Sun, Dec 21, 2025 at 07:35:57PM +1000, James Calligeros wrote:
> This schema was still in plaintext form. Convert to YAML format.
>
> Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
> ---
> .../bindings/sound/tdm-slot.txt | 29 ---------------
> .../bindings/sound/tdm-slot.yaml | 49 +++++++++++++++++++++++++
> 2 files changed, 49 insertions(+), 29 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/tdm-slot.txt b/Documentation/devicetree/bindings/sound/tdm-slot.txt
> deleted file mode 100644
> index 4bb513ae62fc..000000000000
> --- a/Documentation/devicetree/bindings/sound/tdm-slot.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -TDM slot:
> -
> -This specifies audio DAI's TDM slot.
> -
> -TDM slot properties:
> -dai-tdm-slot-num : Number of slots in use.
> -dai-tdm-slot-width : Width in bits for each slot.
> -dai-tdm-slot-tx-mask : Transmit direction slot mask, optional
> -dai-tdm-slot-rx-mask : Receive direction slot mask, optional
> -
> -For instance:
> - dai-tdm-slot-num = <2>;
> - dai-tdm-slot-width = <8>;
> - dai-tdm-slot-tx-mask = <0 1>;
> - dai-tdm-slot-rx-mask = <1 0>;
> -
> -And for each specified driver, there could be one .of_xlate_tdm_slot_mask()
> -to specify an explicit mapping of the channels and the slots. If it's absent
> -the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
> -tx and rx masks.
> -
> -For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
> -for an active slot as default, and the default active bits are at the LSB of
> -the masks.
> -
> -The explicit masks are given as array of integers, where the first
> -number presents bit-0 (LSB), second presents bit-1, etc. Any non zero
> -number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask()
> -does not do anything, if either mask is set non zero value.
> diff --git a/Documentation/devicetree/bindings/sound/tdm-slot.yaml b/Documentation/devicetree/bindings/sound/tdm-slot.yaml
> new file mode 100644
> index 000000000000..5bc46048d689
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tdm-slot.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/tdm-slot.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Time Division Multiplexing (TDM) Slot Parameters
> +
> +maintainers:
> + - Liam Girdwood <lgirdwood@gmail.com>
> +
> +select: false
> +
> +$defs:
> + dai-tdm-slot-num:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Number of slots in use
> +
> + dai-tdm-slot-width:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Width, in bits, of each slot
> +
> + dai-tdm-slot-tx-mask:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: Transmit direction slot mask. Optional. Drivers may specify an
> + .xlate_tdm_slot_mask() to generate a slot mask dynamically. If neither
> + this property nor a driver-specific function are specified, the default
> + snd_soc_xlate_tdm_slot_mask() function will be used to generate a mask.
> + The first element of the array is slot 0 (LSB). Any nonzero value will be
> + treated as 1.
> +
> + dai-tdm-slot-rx-mask:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: Receive direction slot mask. Optional. Identical to TX mask.
Just move each of these to the properties below as they are only used
once.
> +
> +properties:
> + dai-tdm-slot-num:
> + $ref: "#/$defs/dai-tdm-slot-num"
> +
> + dai-tdm-slot-width:
> + $ref: "#/$defs/dai-tdm-slot-width"
> +
> + dai-tdm-slot-tx-mask:
> + $ref: "#/$defs/dai-tdm-slot-tx-mask"
> +
> + dai-tdm-slot-rx-mask:
> + $ref: "#/$defs/dai-tdm-slot-rx-mask"
> +
> +additionalProperties: true
>
> --
> 2.52.0
>
next prev parent reply other threads:[~2025-12-30 1:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-21 9:35 [PATCH v2 0/7] ASoC: basic support for configuring bus keepers James Calligeros
2025-12-21 9:35 ` [PATCH v2 1/7] ASoC: dt-bindings: convert tdm-slot to YAML James Calligeros
2025-12-30 1:35 ` Rob Herring [this message]
2025-12-21 9:35 ` [PATCH v2 2/7] ASoC: dt-bindings: update tdm-slot.txt references to tdm-slot.yaml James Calligeros
2025-12-30 1:32 ` Rob Herring
2025-12-21 9:35 ` [PATCH v2 3/7] ASoC: dt-bindings: add TDM slot idle mode properties James Calligeros
2025-12-30 1:38 ` Rob Herring
2025-12-21 9:36 ` [PATCH v2 4/7] ASoC: soc-dai: define possible idle TDM slot modes James Calligeros
2025-12-21 9:36 ` [PATCH v2 5/7] ASoC: soc-dai: add common operation to set TDM idle mode James Calligeros
2025-12-21 9:36 ` [PATCH v2 6/7] ASoC: tas2764: expose SDOUT bus keeper via set_tdm_idle operation James Calligeros
2025-12-21 9:36 ` [PATCH v2 7/7] ASoC: tas2770: expose SDOUT bus keeper via set_tdm_idle James Calligeros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251230013504.GB3037280-robh@kernel.org \
--to=robh@kernel.org \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jcalligeros99@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shengjiu.wang@nxp.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).