[PATCH 0/3] arm64: defconfig: enable Kontron SMARC-sAM67 support

[PATCH 0/3] arm64: defconfig: enable Kontron SMARC-sAM67 support

[Michael Walle]

Enable the modules required to make the sa67 module function
properly. It is planned to add this module to KCI.

Michael Walle (3):
  arm64: defconfig: enable the J721E PCI host driver
  arm64: defconfig: enable TPS6594 power button module
  arm64: defconfig: enable sa67mcu sensors

 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

-- 
2.47.3

[PATCH 1/3] arm64: defconfig: enable the J721E PCI host driver

[Michael Walle]

To enable the PCI host on the Kontron SMARC-sAM67, enable the driver for
it.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c4dedfabe41a..fca36c2bd1f0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -240,6 +240,7 @@ CONFIG_PCIE_XILINX=y
 CONFIG_PCIE_XILINX_DMA_PL=y
 CONFIG_PCIE_XILINX_NWL=y
 CONFIG_PCIE_XILINX_CPM=y
+CONFIG_PCI_J721E_HOST=m
 CONFIG_PCI_IMX6_HOST=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
-- 
2.47.3

[PATCH 2/3] arm64: defconfig: enable TPS6594 power button module

[Michael Walle]

To enable the power button on Kontron SMARC-sAM67 modules, enable the
driver for it.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fca36c2bd1f0..e175e283e76b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -494,6 +494,7 @@ CONFIG_INPUT_BBNSM_PWRKEY=m
 CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=m
 CONFIG_INPUT_TPS65219_PWRBUTTON=m
+CONFIG_INPUT_TPS6594_PWRBUTTON=m
 CONFIG_INPUT_PWM_BEEPER=m
 CONFIG_INPUT_PWM_VIBRA=m
 CONFIG_INPUT_RK805_PWRKEY=m
-- 
2.47.3

Re: [PATCH 2/3] arm64: defconfig: enable TPS6594 power button module

[Krzysztof Kozlowski]

On 15/01/2026 14:24, Michael Walle wrote:
> To enable the power button on Kontron SMARC-sAM67 modules, enable the
> driver for it.
> 
> Signed-off-by: Michael Walle <mwalle@kernel.org>
> ---
>  arch/arm64/configs/defconfig | 1 +


All these three is one change, you do everything for the same purpose -
specific upstream board.

Do not split commits per line but per logical changes. Change here is:
enable defconfig options so your board will work fine.

Best regards,
Krzysztof

[PATCH 3/3] arm64: defconfig: enable sa67mcu sensors

[Michael Walle]

Enable support for the sensors on the Kontron SMARC-sAM67 board.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e175e283e76b..c109a4b6fc6e 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -758,6 +758,7 @@ CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SA67MCU=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
-- 
2.47.3

Re: [PATCH 0/3] arm64: defconfig: enable Kontron SMARC-sAM67 support

[Nishanth Menon]

Hi Michael Walle,

On Thu, 15 Jan 2026 14:24:41 +0100, Michael Walle wrote:
> Enable the modules required to make the sa67 module function
> properly. It is planned to add this module to KCI.
> 
> Michael Walle (3):
>   arm64: defconfig: enable the J721E PCI host driver
>   arm64: defconfig: enable TPS6594 power button module
>   arm64: defconfig: enable sa67mcu sensors
> 
> [...]

I have applied the following to branch ti-k3-config-next on [1].

I had minor cosmetic fixups in the series (in addition to rebasing to
v6.19-rc1 as it needs to be for pull-requests), do report if i need to
drop the patch series if the changes I have done is not ok.

Thank you!

[1/3] arm64: defconfig: enable the J721E PCI host driver
      commit: f69f88211c84d00d469ad6b9e2f7788be4644d0d
[2/3] arm64: defconfig: enable TPS6594 power button module
      commit: cf6a123141e1498a9249b21c629958400bcaa580
[3/3] arm64: defconfig: enable sa67mcu sensors
      commit: 3aae37fb967b0158f928c85e9c1965dd01e826c1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource

Re: [PATCH 0/3] arm64: defconfig: enable Kontron SMARC-sAM67 support

[Krzysztof Kozlowski]

On 16/01/2026 15:39, Nishanth Menon wrote:
> Hi Michael Walle,
> 
> On Thu, 15 Jan 2026 14:24:41 +0100, Michael Walle wrote:
>> Enable the modules required to make the sa67 module function
>> properly. It is planned to add this module to KCI.
>>
>> Michael Walle (3):
>>   arm64: defconfig: enable the J721E PCI host driver
>>   arm64: defconfig: enable TPS6594 power button module
>>   arm64: defconfig: enable sa67mcu sensors
>>
>> [...]
> 
> I have applied the following to branch ti-k3-config-next on [1].


Before they get to next next, please squash them.

Best regards,
Krzysztof

Re: [PATCH 0/3] arm64: defconfig: enable Kontron SMARC-sAM67 support

[Nishanth Menon]

On 12:05-20260117, Krzysztof Kozlowski wrote:
> On 16/01/2026 15:39, Nishanth Menon wrote:
> > Hi Michael Walle,
> > 
> > On Thu, 15 Jan 2026 14:24:41 +0100, Michael Walle wrote:
> >> Enable the modules required to make the sa67 module function
> >> properly. It is planned to add this module to KCI.
> >>
> >> Michael Walle (3):
> >>   arm64: defconfig: enable the J721E PCI host driver
> >>   arm64: defconfig: enable TPS6594 power button module
> >>   arm64: defconfig: enable sa67mcu sensors
> >>
> >> [...]
> > 
> > I have applied the following to branch ti-k3-config-next on [1].
> 
> 
> Before they get to next next, please squash them.

Thanks for catching this.

Done. new commit 65428481cf6e174cc1bb45444ddc7489e3f2ef0d
("arm64: defconfig: Enable configurations for Kontron SMARC-sAM67")

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource