From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Cristian Birsan <cristian.birsan@microchip.com>,
Balamanikandan Gunasundar
<balamanikandan.gunasundar@microchip.com>,
Varshini Rajendran <varshini.rajendran@microchip.com>
Subject: [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC
Date: Tue, 20 Jan 2026 15:37:28 +0100 [thread overview]
Message-ID: <20260120143759.904013-8-ada@thorsis.com> (raw)
In-Reply-To: <20260120143759.904013-1-ada@thorsis.com>
That peripheral clock is required for proper OTPC function.
Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@microchip.com/T/#u
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
Notes:
v3:
- no changes
v2:
- new patch in series, was not present in v1
drivers/clk/at91/sam9x60.c | 1 +
drivers/clk/at91/sam9x7.c | 1 +
drivers/clk/at91/sama7d65.c | 1 +
drivers/clk/at91/sama7g5.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index a9f293a8e3b26..11f16126ff9e9 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -146,6 +146,7 @@ static const struct {
{ .n = "isi_clk", .id = 43, },
{ .n = "pioD_clk", .id = 44, },
{ .n = "tcb1_clk", .id = 45, },
+ { .n = "otpc_clk", .id = 46, },
{ .n = "dbgu_clk", .id = 47, },
/*
* mpddr_clk feeds DDR controller and is enabled by bootloader thus we
diff --git a/drivers/clk/at91/sam9x7.c b/drivers/clk/at91/sam9x7.c
index 9a5afd258cb86..c4d2b022d9d07 100644
--- a/drivers/clk/at91/sam9x7.c
+++ b/drivers/clk/at91/sam9x7.c
@@ -407,6 +407,7 @@ static const struct {
{ .n = "isi_clk", .id = 43, },
{ .n = "pioD_clk", .id = 44, },
{ .n = "tcb1_clk", .id = 45, },
+ { .n = "otpc_clk", .id = 46, },
{ .n = "dbgu_clk", .id = 47, },
{ .n = "pmecc_clk", .id = 48, },
/*
diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
index 5d8973aa50a53..52467d629258f 100644
--- a/drivers/clk/at91/sama7d65.c
+++ b/drivers/clk/at91/sama7d65.c
@@ -641,6 +641,7 @@ static struct {
{ .n = "mcan2_clk", .p = PCK_PARENT_HW_MCK5, .id = 60, .r = { .max = 200000000, }, },
{ .n = "mcan3_clk", .p = PCK_PARENT_HW_MCK5, .id = 61, .r = { .max = 200000000, }, },
{ .n = "mcan4_clk", .p = PCK_PARENT_HW_MCK5, .id = 62, .r = { .max = 200000000, }, },
+ { .n = "otpc_clk", .p = PCK_PARENT_HW_MCK0, .id = 63, },
{ .n = "pdmc0_clk", .p = PCK_PARENT_HW_MCK9, .id = 64, .r = { .max = 200000000, }, },
{ .n = "pdmc1_clk", .p = PCK_PARENT_HW_MCK9, .id = 65, .r = { .max = 200000000, }, },
{ .n = "pit64b0_clk", .p = PCK_PARENT_HW_MCK7, .id = 66, },
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 9a6f0f30b2b7e..3e0cfd2613851 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -504,6 +504,7 @@ static struct {
{ .n = "mcan3_clk", .p = PCK_PARENT_HW_MCK1, .id = 64, .r = { .max = 200000000, }, },
{ .n = "mcan4_clk", .p = PCK_PARENT_HW_MCK1, .id = 65, .r = { .max = 200000000, }, },
{ .n = "mcan5_clk", .p = PCK_PARENT_HW_MCK1, .id = 66, .r = { .max = 200000000, }, },
+ { .n = "otpc_clk", .p = PCK_PARENT_HW_MCK0, .id = 67, },
{ .n = "pdmc0_clk", .p = PCK_PARENT_HW_MCK1, .id = 68, .r = { .max = 200000000, }, },
{ .n = "pdmc1_clk", .p = PCK_PARENT_HW_MCK1, .id = 69, .r = { .max = 200000000, }, },
{ .n = "pit64b0_clk", .p = PCK_PARENT_HW_MCK1, .id = 70, },
--
2.47.3
next prev parent reply other threads:[~2026-01-20 14:39 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46 ` Rob Herring (Arm)
2026-01-31 15:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-02-09 8:08 ` Alexander Dahl
2026-03-08 16:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` Alexander Dahl [this message]
2026-01-31 15:45 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30 ` Rob Herring (Arm)
2026-01-31 15:47 ` Claudiu Beznea
2026-01-31 15:51 ` Claudiu Beznea
2026-02-20 9:58 ` Alexander Dahl
2026-03-08 16:42 ` Claudiu Beznea
2026-03-08 16:45 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11 ` Claudiu Beznea
2026-02-20 10:38 ` Alexander Dahl
2026-03-08 16:40 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-01-22 16:47 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260120143759.904013-8-ada@thorsis.com \
--to=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=cristian.birsan@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=ryan.wanner@microchip.com \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox