From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller
Date: Tue, 20 Jan 2026 16:44:52 +0100 [thread overview]
Message-ID: <20260120154502.1280938-12-ada@thorsis.com> (raw)
In-Reply-To: <20260120154502.1280938-1-ada@thorsis.com>
Allows to access the OTP memory and Product UID now.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
Notes:
v3:
- Reworded commit message after reordering patches
v2:
- same as in v1, no changes
arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
index b9ffd9e5faacc..c110a8e87568a 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -252,6 +252,10 @@ ethernet-phy@0 {
};
};
+&otpc {
+ status = "okay";
+};
+
&pinctrl {
adc {
pinctrl_adc_default: adc-default {
--
2.47.3
next prev parent reply other threads:[~2026-01-20 17:48 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46 ` Rob Herring (Arm)
2026-01-31 15:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-02-09 8:08 ` Alexander Dahl
2026-03-08 16:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30 ` Rob Herring (Arm)
2026-01-31 15:47 ` Claudiu Beznea
2026-01-31 15:51 ` Claudiu Beznea
2026-02-20 9:58 ` Alexander Dahl
2026-03-08 16:42 ` Claudiu Beznea
2026-03-08 16:45 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11 ` Claudiu Beznea
2026-02-20 10:38 ` Alexander Dahl
2026-03-08 16:40 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44 ` Alexander Dahl [this message]
2026-01-20 15:44 ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-01-22 16:47 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260120154502.1280938-12-ada@thorsis.com \
--to=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox