From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions
Date: Tue, 20 Jan 2026 16:44:53 +0100 [thread overview]
Message-ID: <20260120154502.1280938-13-ada@thorsis.com> (raw)
In-Reply-To: <20260120154502.1280938-1-ada@thorsis.com>
Those were split up per SoC and are not used anymore.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
Notes:
v3:
- new patch, not present in v2
include/dt-bindings/clock/at91.h | 32 --------------------------------
1 file changed, 32 deletions(-)
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index f2a7b7d39c0d0..ebc41cb4edb92 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
@@ -14,38 +14,6 @@
#define PMC_TYPE_GCK 3
#define PMC_TYPE_PROGRAMMABLE 4
-#define PMC_SLOW 0
-#define PMC_MCK 1
-#define PMC_UTMI 2
-#define PMC_MAIN 3
-#define PMC_MCK2 4
-#define PMC_I2S0_MUX 5
-#define PMC_I2S1_MUX 6
-#define PMC_PLLACK 7
-#define PMC_PLLBCK 8
-#define PMC_AUDIOPLLCK 9
-#define PMC_AUDIOPINCK 10
-
-/* SAMA7G5 */
-#define PMC_CPUPLL (PMC_MAIN + 1)
-#define PMC_SYSPLL (PMC_MAIN + 2)
-#define PMC_DDRPLL (PMC_MAIN + 3)
-#define PMC_IMGPLL (PMC_MAIN + 4)
-#define PMC_BAUDPLL (PMC_MAIN + 5)
-#define PMC_AUDIOPMCPLL (PMC_MAIN + 6)
-#define PMC_AUDIOIOPLL (PMC_MAIN + 7)
-#define PMC_ETHPLL (PMC_MAIN + 8)
-#define PMC_CPU (PMC_MAIN + 9)
-#define PMC_MCK1 (PMC_MAIN + 10)
-
-/* SAM9X7 */
-#define PMC_PLLADIV2 (PMC_MAIN + 11)
-#define PMC_LVDSPLL (PMC_MAIN + 12)
-
-/* SAMA7D65 */
-#define PMC_MCK3 (PMC_MAIN + 13)
-#define PMC_MCK5 (PMC_MAIN + 14)
-
#ifndef AT91_PMC_MOSCS
#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
#define AT91_PMC_LOCKA 1 /* PLLA Lock */
--
2.47.3
next prev parent reply other threads:[~2026-01-20 17:48 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46 ` Rob Herring (Arm)
2026-01-31 15:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-02-09 8:08 ` Alexander Dahl
2026-03-08 16:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30 ` Rob Herring (Arm)
2026-01-31 15:47 ` Claudiu Beznea
2026-01-31 15:51 ` Claudiu Beznea
2026-02-20 9:58 ` Alexander Dahl
2026-03-08 16:42 ` Claudiu Beznea
2026-03-08 16:45 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11 ` Claudiu Beznea
2026-02-20 10:38 ` Alexander Dahl
2026-03-08 16:40 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-01-20 15:44 ` Alexander Dahl [this message]
2026-01-22 16:47 ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260120154502.1280938-13-ada@thorsis.com \
--to=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox