From: Anirudh Srinivasan <anirudhsriniv@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Zev Weiss <zev@bewilderbeest.net>,
Renze Nicolai <renze@rnplus.nl>,
Anirudh Srinivasan <anirudhsriniv@gmail.com>
Subject: [PATCH 2/2] ARM: dts: aspeed: Add Asrock Paul IPMI card
Date: Sun, 25 Jan 2026 15:00:39 -0600 [thread overview]
Message-ID: <20260125-asrock-paul-v1-2-956085a4bd06@gmail.com> (raw)
In-Reply-To: <20260125-asrock-paul-v1-0-956085a4bd06@gmail.com>
Add device tree for Asrock Paul IPMI card, an AST2500 based PCIe BMC
card.
Signed-off-by: Anirudh Srinivasan <anirudhsriniv@gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-asrock-paul-ipmi-card.dts | 131 +++++++++++++++++++++
2 files changed, 132 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 9adf9278dc94f84653775296c93150e61cc99328..be3c84a8462353996e0503cd95326ed88f6b8723 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-e3c256d4i.dtb \
+ aspeed-bmc-asrock-paul-ipmi-card.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
aspeed-bmc-asrock-spc621d8hm3.dtb \
aspeed-bmc-asrock-x570d4u.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-paul-ipmi-card.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-paul-ipmi-card.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f74f8fee9e1edb6cc1c0a0aef1268bdf91fc03f7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-paul-ipmi-card.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Anirudh Srinivasan
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/{
+ model = "ASRock Paul IPMI Card";
+ compatible = "asrock,ast2500-paul-ipmi-card", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-fan-1 {
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ label = "fan1_red";
+ default-state = "off";
+ };
+
+ led-fan-2 {
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ label = "fan2_red";
+ default-state = "off";
+ };
+
+ led-fault {
+ gpios = <&gpio ASPEED_GPIO(Y, 3) GPIO_ACTIVE_LOW>;
+ label = "panic_red";
+ panic-indicator;
+ default-state = "off";
+ };
+
+ led-heartbeat {
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ label = "heartbeat_green";
+ linux,default-trigger = "timer";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ video_engine_memory: video {
+ size = <0x02000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "", "", "", "", "", "", "", "",
+ /* B */ "", "", "", "", "", "", "", "",
+ /* C */ "", "", "", "", "", "", "", "",
+ /* D */ "", "BMC_PWRBTN", "", "BMC_RESETCON", "", "", "", "",
+ /* E */ "", "", "", "", "", "", "", "",
+ /* F */ "", "", "", "", "", "", "", "",
+ /* G */ "", "", "", "", "", "", "", "",
+ /* H */ "", "", "", "", "", "", "BMC_LED1", "",
+ /* I */ "", "", "", "", "", "", "", "",
+ /* J */ "", "", "", "", "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "", "", "", "", "", "", "", "",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "", "", "", "", "",
+ /* R */ "", "", "", "", "", "", "", "",
+ /* S */ "", "", "", "", "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "PCIE_STNDBY", "", "",
+ /* Y */ "", "", "", "SYSTEM_ERR_LED", "", "", "", "",
+ /* Z */ "", "", "", "", "", "", "", "",
+ /* AA */ "FAN_1_LED", "FAN_2_LED", "", "", "", "", "", "",
+ /* AB */ "", "", "", "", "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
--
2.52.0
next prev parent reply other threads:[~2026-01-25 21:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-25 21:00 [PATCH 0/2] Add device tree for Asrock Paul IPMI Card Anirudh Srinivasan
2026-01-25 21:00 ` [PATCH 1/2] dt-bindings: arm: aspeed: Add Asrock Paul IPMI card Anirudh Srinivasan
2026-01-26 20:27 ` Conor Dooley
2026-01-25 21:00 ` Anirudh Srinivasan [this message]
2026-02-09 5:30 ` [PATCH 0/2] Add device tree for Asrock Paul IPMI Card Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260125-asrock-paul-v1-2-956085a4bd06@gmail.com \
--to=anirudhsriniv@gmail.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=renze@rnplus.nl \
--cc=robh@kernel.org \
--cc=zev@bewilderbeest.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox