From: Joey Lu <a0987203069@gmail.com>
To: airlied@gmail.com, simona@ffwll.ch,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
a0987203069@gmail.com, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] arm64: dts: nuvoton: ma35d1: add display controller support
Date: Thu, 29 Jan 2026 12:05:31 +0800 [thread overview]
Message-ID: <20260129040532.382693-3-a0987203069@gmail.com> (raw)
In-Reply-To: <20260129040532.382693-1-a0987203069@gmail.com>
Enable the Display Control Unit (DCU) for the Nuvoton MA35D1 SoC.
This patch adds the DCU node to the SoC dtsi and enables it on
the MA35D1 SOM board.
Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 56 +++++++++++++++++++
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 14 +++++
2 files changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..e596bb452cc9 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -98,6 +98,42 @@ pinctrl_uart16: uart16-pins {
power-source = <1>;
};
};
+
+ dcu {
+ pinctrl_display: display-pins {
+ nuvoton,pins =
+ <6 8 6>, /* VSYNC */
+ <6 9 6>, /* HSYNC */
+ <6 10 6>, /* CLK */
+ <10 4 6>, /* DE */
+ <8 8 6>, /* D0 - D23 */
+ <8 9 6>,
+ <8 10 6>,
+ <8 11 6>,
+ <8 12 6>,
+ <8 13 6>,
+ <8 14 6>,
+ <8 15 6>,
+ <7 0 6>,
+ <7 1 6>,
+ <7 2 6>,
+ <7 3 6>,
+ <7 4 6>,
+ <7 5 6>,
+ <7 6 6>,
+ <7 7 6>,
+ <2 12 6>,
+ <2 13 6>,
+ <2 14 6>,
+ <2 15 6>,
+ <7 12 6>,
+ <7 13 6>,
+ <7 14 6>,
+ <7 15 6>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
};
&uart0 {
@@ -129,3 +165,23 @@ &uart16 {
pinctrl-0 = <&pinctrl_uart16>;
status = "okay";
};
+
+&panel {
+ port {
+ panel_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
+
+&display {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_display>;
+ status = "okay";
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..7d9d077f12b2 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -379,5 +379,19 @@ uart16: serial@40880000 {
clocks = <&clk UART16_GATE>;
status = "disabled";
};
+
+ panel: panel {
+ compatible = "panel-dpi";
+ };
+
+ display: display@40260000 {
+ compatible = "nuvoton,ma35d1-dcu";
+ reg = <0x0 0x40260000 0x0 0x2000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk DCU_GATE>, <&clk DCUP_DIV>;
+ clock-names = "dcu_gate", "dcup_div";
+ resets = <&sys MA35D1_RESET_DISP>;
+ status = "disabled";
+ };
};
};
--
2.43.0
next prev parent reply other threads:[~2026-01-29 4:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-29 4:05 [PATCH v2 0/3] drm: nuvoton: Add MA35D1 display controller support Joey Lu
2026-01-29 4:05 ` [PATCH v2 1/3] dt-bindings: display: nuvoton: add MA35D1 DCU binding Joey Lu
2026-02-05 13:18 ` Krzysztof Kozlowski
2026-02-06 7:05 ` Joey Lu
2026-01-29 4:05 ` Joey Lu [this message]
2026-02-05 13:23 ` [PATCH v2 2/3] arm64: dts: nuvoton: ma35d1: add display controller support Krzysztof Kozlowski
2026-02-06 7:12 ` Joey Lu
2026-02-06 8:56 ` Krzysztof Kozlowski
2026-02-06 9:21 ` Joey Lu
2026-01-29 4:05 ` [PATCH v2 3/3] drm/nuvoton: add MA35D1 display controller driver Joey Lu
2026-02-05 13:22 ` Krzysztof Kozlowski
2026-02-06 7:23 ` Joey Lu
2026-02-06 15:09 ` Icenowy Zheng
2026-02-09 8:45 ` Joey Lu
2026-02-10 12:02 ` Icenowy Zheng
2026-03-03 8:15 ` Joey Lu
2026-03-08 15:20 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260129040532.382693-3-a0987203069@gmail.com \
--to=a0987203069@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=schung@nuvoton.com \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=ychuang3@nuvoton.com \
--cc=yclu4@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox