From: Dominik Haller <d.haller@phytec.de>
To: <adrien.grassein@gmail.com>, <jernej.skrabec@gmail.com>,
<onas@kwiboo.se>, <Laurent.pinchart@ideasonboard.com>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <robh@kernel.org>
Cc: <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<upstream@lists.phytec.de>, "Dominik Haller" <d.haller@phytec.de>
Subject: [PATCH 0/6] k3-am68-phyboard-izar dsi support
Date: Fri, 30 Jan 2026 12:58:10 -0800 [thread overview]
Message-ID: <20260130205820.83189-1-d.haller@phytec.de> (raw)
This series adds support for the two dsi based display interfaces of the
phyboard-izar with the phycore-am68x/tda4x som.
dsi0 gets converted to lvds on the som using a SN65DSI83 bridge in the
default configuration. The phyboard-izar kit comes with a 10.1" lvds
display with usb touch as addon.
dsi1 is routed to the carrier board onto a connector. To use that Phytec
has developed a small extension board "PEB-AV-15" with a Lontium LT8912B
dsi->hdmi bridge.
Dominik Haller (6):
arm64: dts: ti: k3-am68-phyboard-izar: Assign dss clocks
arm64: dts: ti: k3-am68-phycore-som: Add DSI->LVDS bridge
arm64: dts: ti: k3-am68-phyboard-izar: Add LVDS-Display
arm64: dts: ti: k3-j721s2-main: Add DSI1
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
arm64: dts: ti: k3-am68-phyboard-izar: Add PEB-AV-15 overlay
.../display/bridge/lontium,lt8912b.yaml | 1 -
arch/arm64/boot/dts/ti/Makefile | 8 +
...-am68-phyboard-izar-lvds-ph128800t006.dtso | 125 ++++++++++++
.../ti/k3-am68-phyboard-izar-peb-av-15.dtso | 192 ++++++++++++++++++
.../boot/dts/ti/k3-am68-phyboard-izar.dts | 18 ++
.../boot/dts/ti/k3-am68-phycore-som.dtsi | 17 ++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 39 ++++
7 files changed, 399 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-lvds-ph128800t006.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso
--
2.43.0
next reply other threads:[~2026-01-30 20:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-30 20:58 Dominik Haller [this message]
2026-01-30 20:58 ` [PATCH 1/6] arm64: dts: ti: k3-am68-phyboard-izar: Assign dss clocks Dominik Haller
2026-01-30 20:58 ` [PATCH 2/6] arm64: dts: ti: k3-am68-phycore-som: Add DSI->LVDS bridge Dominik Haller
2026-01-30 20:58 ` [PATCH 3/6] arm64: dts: ti: k3-am68-phyboard-izar: Add LVDS-Display Dominik Haller
2026-01-30 20:58 ` [PATCH 4/6] arm64: dts: ti: k3-j721s2-main: Add DSI1 Dominik Haller
2026-03-10 10:32 ` Beleswar Prasad Padhi
2026-01-30 20:58 ` [PATCH 5/6] dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement Dominik Haller
2026-02-09 17:58 ` Rob Herring (Arm)
2026-01-30 20:58 ` [PATCH 6/6] arm64: dts: ti: k3-am68-phyboard-izar: Add PEB-AV-15 overlay Dominik Haller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260130205820.83189-1-d.haller@phytec.de \
--to=d.haller@phytec.de \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=adrien.grassein@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=onas@kwiboo.se \
--cc=robh@kernel.org \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox