From: Fabio Estevam <festevam@gmail.com>
To: heiko@sntech.de
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
Fabio Estevam <festevam@nabladev.com>
Subject: [PATCH 11/11] ARM: dts: rockchip: Add Onion RV1103B Omega4
Date: Fri, 6 Feb 2026 15:13:09 -0300 [thread overview]
Message-ID: <20260206181309.2696095-12-festevam@gmail.com> (raw)
In-Reply-To: <20260206181309.2696095-1-festevam@gmail.com>
From: Fabio Estevam <festevam@nabladev.com>
Onion Omega4 board is a board based on the RV1103B SoC that has:
- 256 MB of RAM
- 256 MB of SPI-NAND
- Ethernet
- USB OTG
- Wifi
- SD card
- Camera connector
Add the initial support for this board so that it can fully boot into
Linux with the root file system stored in the SPI NAND.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
---
arch/arm/boot/dts/rockchip/Makefile | 1 +
arch/arm/boot/dts/rockchip/rv1103b-omega4.dts | 92 +++++++++++++++++++
2 files changed, 93 insertions(+)
create mode 100644 arch/arm/boot/dts/rockchip/rv1103b-omega4.dts
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index 716f5540e438..d8cd5df138cc 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rv1103b-omega4.dtb \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
rv1109-relfor-saib.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts b/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts
new file mode 100644
index 000000000000..512b063bceb1
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1103b-omega4.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 plan44.ch/luz
+ * Copyright (c) 2025 Onion Corporation
+ */
+
+/dts-v1/;
+
+#include "rv1103b.dtsi"
+
+/ {
+ model = "Onion RV1103 Omega4 Board";
+ compatible = "onion,rv1103b-omega4", "rockchip,rv1103b";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ label = "sys";
+ default-state = "on";
+ };
+ };
+};
+
+&fspi0 {
+ bootph-all;
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <75000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "env";
+ reg = <0x00000000 0x00040000>;
+ };
+
+ partition@40000 {
+ label = "idblock";
+ reg = <0x00040000 0x00100000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "uboot";
+ reg = <0x00140000 0x00100000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "boot";
+ reg = <0x00240000 0x00800000>;
+ };
+
+ partition@a40000 {
+ label = "ubi";
+ reg = <0x00a40000 0x0f5c0000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer_pins>;
+ bootph-all;
+ status = "okay";
+};
+
+&wdt {
+ bootph-all;
+ status = "okay";
+};
--
2.34.1
next prev parent reply other threads:[~2026-02-06 19:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-06 18:12 [PATCH 00/11] ARM: rockchip: Add initial RV1103B and Omega4 board support Fabio Estevam
2026-02-06 18:12 ` [PATCH 01/11] dt-bindings: clock: rockchip: Add RV1103B clock and reset unit Fabio Estevam
2026-02-07 10:54 ` Krzysztof Kozlowski
2026-02-06 18:13 ` [PATCH 02/11] dt-bindings: clk: rockchip: Add RV1103B clock header Fabio Estevam
2026-02-06 20:15 ` Jonas Karlman
2026-02-07 11:00 ` Krzysztof Kozlowski
2026-02-07 11:01 ` Krzysztof Kozlowski
2026-02-06 18:13 ` [PATCH 03/11] clk: rockchip: Add clock controller for the RV1103B Fabio Estevam
2026-02-06 18:13 ` [PATCH 04/11] dt-bindings: pinctrl: Add RV1103B pinctrl support Fabio Estevam
2026-02-06 18:13 ` [PATCH 05/11] pinctrl: rockchip: " Fabio Estevam
2026-02-06 18:13 ` [PATCH 06/11] dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for R1103B Fabio Estevam
2026-02-07 10:58 ` Krzysztof Kozlowski
2026-02-06 18:13 ` [PATCH 07/11] dt-bindings: serial: snps-dw-apb-uart: Add support for RV1103B Fabio Estevam
2026-02-07 10:59 ` Krzysztof Kozlowski
2026-02-07 11:09 ` Greg Kroah-Hartman
2026-02-06 18:13 ` [PATCH 08/11] dt-bindings: soc: rockchip: Add RV1103B IOC and GRF entries Fabio Estevam
2026-02-07 11:03 ` Krzysztof Kozlowski
2026-02-06 18:13 ` [PATCH 09/11] ARM: dts: rockchip: Add support for RV1103B Fabio Estevam
2026-02-06 18:13 ` [PATCH 10/11] dt-bindings: arm: rockchip: Add Onion RV1103B Omega4 Fabio Estevam
2026-02-07 10:56 ` Krzysztof Kozlowski
2026-02-06 18:13 ` Fabio Estevam [this message]
2026-02-06 20:50 ` [PATCH 11/11] ARM: dts: " Jonas Karlman
2026-02-07 10:55 ` [PATCH 00/11] ARM: rockchip: Add initial RV1103B and Omega4 board support Krzysztof Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2026-02-06 18:37 [PATCH 11/11] ARM: dts: rockchip: Add Onion RV1103B Omega4 Fabio Estevam
2026-02-06 18:42 Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260206181309.2696095-12-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@nabladev.com \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox