From: Anand Moon <linux.amoon@gmail.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
linux-pm@vger.kernel.org (open list:SAMSUNG THERMAL DRIVER),
linux-samsung-soc@vger.kernel.org (open list:SAMSUNG THERMAL
DRIVER),
linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG
S3C, S5P AND EXYNOS ARM ARCHITECTURES),
linux-kernel@vger.kernel.org (open list)
Cc: Anand Moon <linux.amoon@gmail.com>
Subject: [PATCH v8 7/9] thermal/drivers/exynos: Relocate exynos_sensor_ops for forward declatition
Date: Sat, 14 Feb 2026 23:49:04 +0530 [thread overview]
Message-ID: <20260214181930.238981-8-linux.amoon@gmail.com> (raw)
In-Reply-To: <20260214181930.238981-1-linux.amoon@gmail.com>
Relocate exynos_set_trips() and exynos_sensor_ops to a different
position in the file to resolve forward declaration dependencies
for register to pointer to thermal_zone_device structure.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v8: new patch.
---
drivers/thermal/samsung/exynos_tmu.c | 56 ++++++++++++++--------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index f77abdcdc62b..1d657802a310 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -808,6 +808,34 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
writel(val_irq, data->base + tmu_intclear);
}
+static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+ struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ if (low > INT_MIN)
+ data->soc_config->tmu_set_low_temp(data, low / MCELSIUS);
+ else
+ data->soc_config->tmu_disable_low(data);
+ if (high < INT_MAX)
+ data->soc_config->tmu_set_high_temp(data, high / MCELSIUS);
+ else
+ data->soc_config->tmu_disable_high(data);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops exynos_sensor_ops = {
+ .get_temp = exynos_get_temp,
+ .set_emul_temp = exynos_tmu_set_emulation,
+ .set_trips = exynos_set_trips,
+};
+
static const struct exynos_tmu_soc_config exynos3250_data = {
.soc = SOC_ARCH_EXYNOS3250,
.tmu_set_low_temp = exynos4412_tmu_set_low_temp,
@@ -1008,34 +1036,6 @@ static int exynos_map_dt_data(struct platform_device *pdev)
return 0;
}
-static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
-{
- struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
-
- mutex_lock(&data->lock);
- clk_enable(data->clk);
-
- if (low > INT_MIN)
- data->soc_config->tmu_set_low_temp(data, low / MCELSIUS);
- else
- data->soc_config->tmu_disable_low(data);
- if (high < INT_MAX)
- data->soc_config->tmu_set_high_temp(data, high / MCELSIUS);
- else
- data->soc_config->tmu_disable_high(data);
-
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
-
- return 0;
-}
-
-static const struct thermal_zone_device_ops exynos_sensor_ops = {
- .get_temp = exynos_get_temp,
- .set_emul_temp = exynos_tmu_set_emulation,
- .set_trips = exynos_set_trips,
-};
-
static int exynos_tmu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
--
2.50.1
next prev parent reply other threads:[~2026-02-14 18:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-14 18:18 [PATCH v8 0/9] Exynos Thermal code improvement Anand Moon
2026-02-14 18:18 ` [PATCH v8 1/9] thermal/drivers/exynos: Refactor clk_sec initialization inside SOC-specific case Anand Moon
2026-02-14 18:18 ` [PATCH v8 2/9] thermal/drivers/exynos: Use devm_clk_get_enabled() helpers Anand Moon
2026-02-14 18:19 ` [PATCH v8 3/9] thermal/drivers/exynos: Remove redundant IS_ERR() checks for clk_sec clock Anand Moon
2026-02-14 18:19 ` [PATCH v8 4/9] thermal/drivers/exynos: Fixed the efuse min max value for exynos5422 Anand Moon
2026-02-14 18:19 ` [PATCH v8 5/9] thermal/drivers/exynos: Remove unused base_second mapping and references Anand Moon
2026-02-14 18:19 ` [PATCH v8 6/9] thermal/drivers/exynos: Refactor SoC-specific configuration to new exynos_tmu_soc_config structure Anand Moon
2026-02-14 18:19 ` Anand Moon [this message]
2026-02-14 18:19 ` [PATCH v8 8/9] thermal/drivers/exynos: Add missing drvdata assignment in Exynos TMU probe Anand Moon
2026-02-14 18:19 ` [PATCH v8 9/9] thermal/drivers/exynos: Fix some coding style issue Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260214181930.238981-8-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=bzolnier@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox