[PATCH v2 2/4] arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable bluetooth

[Nick Xie <nick@khadas.com>]

The Khadas VIM1S board uses the Ampak AP6256 Wi-Fi/Bluetooth module.
The Bluetooth controller is connected via UART_A and requires the
external 32k clock (LPO).

Enable the UART_A node and add the bluetooth child node to support it.

Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts  | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts
index 27d0f6134ea9d..d36533f5559a8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts
@@ -254,6 +254,21 @@ &spicc0 {
 	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
 
+&uart_a {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&sdio_32k>;
+		clock-names = "lpo";
+	};
+};
+
 &uart_b {
 	status = "okay";
 };
-- 
2.34.1