* [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-01-28 9:36 [PATCH v4 0/3] Add support for Cix Sky1 resets Gary Yang
@ 2026-01-28 9:36 ` Gary Yang
2026-01-28 10:01 ` Krzysztof Kozlowski
2026-01-28 11:22 ` Rob Herring (Arm)
0 siblings, 2 replies; 11+ messages in thread
From: Gary Yang @ 2026-01-28 9:36 UTC (permalink / raw)
To: lee, robh, krzk+dt, conor+dt, p.zabel, peter.chen
Cc: devicetree, linux-kernel, linux-arm-kernel, cix-kernel-upstream,
Gary Yang
There are two reset controllers on Cix sky1 Soc.
One is located in S0 domain, and the other is located
in S0 and S5 domain.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Link: https://lore.kernel.org/r/20251124063235.952136-2-gary.yang@cixtech.com
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
---
.../devicetree/bindings/mfd/syscon.yaml | 7 +
.../bindings/reset/cix,sky1-rst.yaml | 46 +++++
.../soc/cix/cix,sky1-system-controller.yaml | 48 +++++
include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
5 files changed, 307 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 55efb83b1495..be864a6b8efb 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -170,6 +170,8 @@ properties:
- cirrus,ep7209-syscon1
- cirrus,ep7209-syscon2
- cirrus,ep7209-syscon3
+ - cix,sky1-system-controller
+ - cix,sky1-s5-system-controller
- cnxt,cx92755-uc
- freecom,fsg-cs2-system-controller
- fsl,imx93-aonmix-ns-syscfg
@@ -254,6 +256,11 @@ properties:
- const: microchip,pic64gx-sysreg-scb
- const: microchip,mpfs-sysreg-scb
- const: syscon
+ - items:
+ - enum:
+ - cix,sky1-system-controller
+ - cix,sky1-s5-system-controller
+ - const: syscon
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
new file mode 100644
index 000000000000..4323acdc2c45
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX Sky1 Reset Controller
+
+maintainers:
+ - Gary Yang <gary.yang@cixtech.com>
+
+description: |
+ CIX Sky1 reset controller can be used to reset various set of peripherals.
+ There are two reset controllers, one is located in S0 domain, the other
+ is located in S0 and S5 domain.
+
+ See also:
+ - include/dt-bindings/reset/cix,sky1-rst.h
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - cix,sky1-rst
+ - cix,sky1-rst-fch
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@16000000 {
+ compatible = "cix,sky1-s5-system-controller", "syscon",
+ "simple-mfd";
+ reg = <0x0 0x16000000 0x0 0x1000>;
+ src: reset-controller {
+ compatible = "cix,sky1-rst";
+ #reset-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
new file mode 100644
index 000000000000..f6e2776e3f53
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cix Sky1 SoC system controller register region
+
+maintainers:
+ - Gary Yang <gary.yang@cixtech.com>
+
+description:
+ An wide assortment of registers of the system controller on Sky1 SoC,
+ including resets and usb.
+
+allOf:
+ - $ref: /schemas/mfd/syscon.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - contains:
+ - enum:
+ - cix,sky1-system-controller
+ - cix,sky1-s5-system-controller
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 2
+
+patternProperties:
+ "^reset(-controller)?$":
+ $ref: /schemas/reset/cix,sky1-rst.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@16000000 {
+ compatible = "cix,sky1-s5-system-controller", "syscon", "simple-mfd";
+ reg = <0x0 0x16000000 0x0 0x1000>;
+ };
+
diff --git a/include/dt-bindings/reset/cix,sky1-rst-fch.h b/include/dt-bindings/reset/cix,sky1-rst-fch.h
new file mode 100644
index 000000000000..8e67d7eb92aa
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-rst-fch.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_FCH_SKY1_H
+#define DT_BINDING_RESET_FCH_SKY1_H
+
+/* func reset for sky1 fch */
+
+#define SW_I3C0_RST_FUNC_G_N 0
+#define SW_I3C0_RST_FUNC_I_N 1
+#define SW_I3C1_RST_FUNC_G_N 2
+#define SW_I3C1_RST_FUNC_I_N 3
+#define SW_UART0_RST_FUNC_N 4
+#define SW_UART1_RST_FUNC_N 5
+#define SW_UART2_RST_FUNC_N 6
+#define SW_UART3_RST_FUNC_N 7
+#define SW_TIMER_RST_FUNC_N 8
+
+/* apb reset for sky1 fch */
+#define SW_I3C0_RST_APB_N 9
+#define SW_I3C1_RST_APB_N 10
+#define SW_DMA_RST_AXI_N 11
+#define SW_UART0_RST_APB_N 12
+#define SW_UART1_RST_APB_N 13
+#define SW_UART2_RST_APB_N 14
+#define SW_UART3_RST_APB_N 15
+#define SW_SPI0_RST_APB_N 16
+#define SW_SPI1_RST_APB_N 17
+#define SW_I2C0_RST_APB_N 18
+#define SW_I2C1_RST_APB_N 19
+#define SW_I2C2_RST_APB_N 20
+#define SW_I2C3_RST_APB_N 21
+#define SW_I2C4_RST_APB_N 22
+#define SW_I2C5_RST_APB_N 23
+#define SW_I2C6_RST_APB_N 24
+#define SW_I2C7_RST_APB_N 25
+#define SW_GPIO_RST_APB_N 26
+
+/* fch rst for xspi */
+#define SW_XSPI_REG_RST_N 27
+#define SW_XSPI_SYS_RST_N 28
+
+#endif
diff --git a/include/dt-bindings/reset/cix,sky1-rst.h b/include/dt-bindings/reset/cix,sky1-rst.h
new file mode 100644
index 000000000000..2f0990922aad
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-rst.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_SKY1_H
+#define DT_BINDING_RESET_SKY1_H
+
+/* reset for csu_pm */
+
+#define SKY1_CSU_PM_RESET_N 0
+#define SKY1_SENSORFUSION_RESET_N 1
+#define SKY1_SENSORFUSION_NOC_RESET_N 2
+
+/* reset group0 for s0 domain modules */
+#define SKY1_DDRC_RESET_N 3
+#define SKY1_GIC_RESET_N 4
+#define SKY1_CI700_RESET_N 5
+#define SKY1_SYS_NI700_RESET_N 6
+#define SKY1_MM_NI700_RESET_N 7
+#define SKY1_PCIE_NI700_RESET_N 8
+#define SKY1_GPU_RESET_N 9
+#define SKY1_NPUTOP_RESET_N 10
+#define SKY1_NPUCORE0_RESET_N 11
+#define SKY1_NPUCORE1_RESET_N 12
+#define SKY1_NPUCORE2_RESET_N 13
+#define SKY1_VPU_RESET_N 14
+#define SKY1_ISP_SRESET_N 15
+#define SKY1_ISP_ARESET_N 16
+#define SKY1_ISP_HRESET_N 17
+#define SKY1_ISP_GDCRESET_N 18
+#define SKY1_DPU_RESET0_N 19
+#define SKY1_DPU_RESET1_N 20
+#define SKY1_DPU_RESET2_N 21
+#define SKY1_DPU_RESET3_N 22
+#define SKY1_DPU_RESET4_N 23
+#define SKY1_DP_RESET0_N 24
+#define SKY1_DP_RESET1_N 25
+#define SKY1_DP_RESET2_N 26
+#define SKY1_DP_RESET3_N 27
+#define SKY1_DP_RESET4_N 28
+#define SKY1_DP_PHY_RST_N 29
+
+/* reset group1 for s0 domain modules */
+#define SKY1_AUDIO_HIFI5_RESET_N 30
+#define SKY1_AUDIO_HIFI5_NOC_RESET_N 31
+#define SKY1_CSIDPHY_PRST0_N 32
+#define SKY1_CSIDPHY_CMNRST0_N 33
+#define SKY1_CSI0_RST_N 34
+#define SKY1_CSIDPHY_PRST1_N 35
+#define SKY1_CSIDPHY_CMNRST1_N 36
+#define SKY1_CSI1_RST_N 37
+#define SKY1_CSI2_RST_N 38
+#define SKY1_CSI3_RST_N 39
+#define SKY1_CSIBRDGE0_RST_N 40
+#define SKY1_CSIBRDGE1_RST_N 41
+#define SKY1_CSIBRDGE2_RST_N 42
+#define SKY1_CSIBRDGE3_RST_N 43
+#define SKY1_GMAC0_RST_N 44
+#define SKY1_GMAC1_RST_N 45
+#define SKY1_PCIE0_RESET_N 46
+#define SKY1_PCIE1_RESET_N 47
+#define SKY1_PCIE2_RESET_N 48
+#define SKY1_PCIE3_RESET_N 49
+#define SKY1_PCIE4_RESET_N 50
+
+/* reset group1 for usb phys */
+#define SKY1_USB_DP_PHY0_PRST_N 51
+#define SKY1_USB_DP_PHY1_PRST_N 52
+#define SKY1_USB_DP_PHY2_PRST_N 53
+#define SKY1_USB_DP_PHY3_PRST_N 54
+#define SKY1_USB_DP_PHY0_RST_N 55
+#define SKY1_USB_DP_PHY1_RST_N 56
+#define SKY1_USB_DP_PHY2_RST_N 57
+#define SKY1_USB_DP_PHY3_RST_N 58
+#define SKY1_USBPHY_SS_PST_N 59
+#define SKY1_USBPHY_SS_RST_N 60
+#define SKY1_USBPHY_HS0_PRST_N 61
+#define SKY1_USBPHY_HS1_PRST_N 62
+#define SKY1_USBPHY_HS2_PRST_N 63
+#define SKY1_USBPHY_HS3_PRST_N 64
+#define SKY1_USBPHY_HS4_PRST_N 65
+#define SKY1_USBPHY_HS5_PRST_N 66
+#define SKY1_USBPHY_HS6_PRST_N 67
+#define SKY1_USBPHY_HS7_PRST_N 68
+#define SKY1_USBPHY_HS8_PRST_N 69
+#define SKY1_USBPHY_HS9_PRST_N 70
+
+/* reset group1 for usb controllers */
+#define SKY1_USBC_SS0_PRST_N 71
+#define SKY1_USBC_SS1_PRST_N 72
+#define SKY1_USBC_SS2_PRST_N 73
+#define SKY1_USBC_SS3_PRST_N 74
+#define SKY1_USBC_SS4_PRST_N 75
+#define SKY1_USBC_SS5_PRST_N 76
+#define SKY1_USBC_SS0_RST_N 77
+#define SKY1_USBC_SS1_RST_N 78
+#define SKY1_USBC_SS2_RST_N 79
+#define SKY1_USBC_SS3_RST_N 80
+#define SKY1_USBC_SS4_RST_N 81
+#define SKY1_USBC_SS5_RST_N 82
+#define SKY1_USBC_HS0_PRST_N 83
+#define SKY1_USBC_HS1_PRST_N 84
+#define SKY1_USBC_HS2_PRST_N 85
+#define SKY1_USBC_HS3_PRST_N 86
+#define SKY1_USBC_HS0_RST_N 87
+#define SKY1_USBC_HS1_RST_N 88
+#define SKY1_USBC_HS2_RST_N 89
+#define SKY1_USBC_HS3_RST_N 90
+
+/* reset group0 for rcsu */
+#define SKY1_AUDIO_RCSU_RESET_N 91
+#define SKY1_CI700_RCSU_RESET_N 92
+#define SKY1_CSI_RCSU0_RESET_N 93
+#define SKY1_CSI_RCSU1_RESET_N 94
+#define SKY1_CSU_PM_RCSU_RESET_N 95
+#define SKY1_DDR_BROADCAST_RCSU_RESET_N 96
+#define SKY1_DDR_CTRL_RCSU_0_RESET_N 97
+#define SKY1_DDR_CTRL_RCSU_1_RESET_N 98
+#define SKY1_DDR_CTRL_RCSU_2_RESET_N 99
+#define SKY1_DDR_CTRL_RCSU_3_RESET_N 100
+#define SKY1_DDR_TZC400_RCSU_0_RESET_N 101
+#define SKY1_DDR_TZC400_RCSU_1_RESET_N 102
+#define SKY1_DDR_TZC400_RCSU_2_RESET_N 103
+#define SKY1_DDR_TZC400_RCSU_3_RESET_N 104
+#define SKY1_DP0_RCSU_RESET_N 105
+#define SKY1_DP1_RCSU_RESET_N 106
+#define SKY1_DP2_RCSU_RESET_N 107
+#define SKY1_DP3_RCSU_RESET_N 108
+#define SKY1_DP4_RCSU_RESET_N 109
+#define SKY1_DPU0_RCSU_RESET_N 110
+#define SKY1_DPU1_RCSU_RESET_N 111
+#define SKY1_DPU2_RCSU_RESET_N 112
+#define SKY1_DPU3_RCSU_RESET_N 113
+#define SKY1_DPU4_RCSU_RESET_N 114
+#define SKY1_DSU_RCSU_RESET_N 115
+#define SKY1_FCH_RCSU_RESET_N 116
+#define SKY1_GICD_RCSU_RESET_N 117
+#define SKY1_GMAC_RCSU_RESET_N 118
+#define SKY1_GPU_RCSU_RESET_N 119
+#define SKY1_ISP_RCSU0_RESET_N 120
+#define SKY1_ISP_RCSU1_RESET_N 121
+#define SKY1_NI700_MMHUB_RCSU_RESET_N 122
+
+/* reset group1 for rcsu */
+#define SKY1_NPU_RCSU_RESET_N 123
+#define SKY1_NI700_PCIE_RCSU_RESET_N 124
+#define SKY1_PCIE_X421_RCSU_RESET_N 125
+#define SKY1_PCIE_X8_RCSU_RESET_N 126
+#define SKY1_SF_RCSU_RESET_N 127
+#define SKY1_RCSU_SMMU_MMHUB_RESET_N 128
+#define SKY1_RCSU_SMMU_PCIEHUB_RESET_N 129
+#define SKY1_RCSU_SYSHUB_RESET_N 130
+#define SKY1_NI700_SMN_RCSU_RESET_N 131
+#define SKY1_NI700_SYSHUB_RCSU_RESET_N 132
+#define SKY1_RCSU_USB2_HOST0_RESET_N 133
+#define SKY1_RCSU_USB2_HOST1_RESET_N 134
+#define SKY1_RCSU_USB2_HOST2_RESET_N 135
+#define SKY1_RCSU_USB2_HOST3_RESET_N 136
+#define SKY1_RCSU_USB3_TYPEA_DRD_RESET_N 137
+#define SKY1_RCSU_USB3_TYPEC_DRD_RESET_N 138
+#define SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N 139
+#define SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N 140
+#define SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N 141
+#define SKY1_VPU_RCSU_RESET_N 142
+
+#endif
--
2.49.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-01-28 9:36 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Gary Yang
@ 2026-01-28 10:01 ` Krzysztof Kozlowski
2026-01-28 10:14 ` Conor Dooley
2026-01-28 11:22 ` Rob Herring (Arm)
1 sibling, 1 reply; 11+ messages in thread
From: Krzysztof Kozlowski @ 2026-01-28 10:01 UTC (permalink / raw)
To: Gary Yang, lee, robh, krzk+dt, conor+dt, p.zabel, peter.chen
Cc: devicetree, linux-kernel, linux-arm-kernel, cix-kernel-upstream
On 28/01/2026 10:36, Gary Yang wrote:
> There are two reset controllers on Cix sky1 Soc.
> One is located in S0 domain, and the other is located
> in S0 and S5 domain.
Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> Link: https://lore.kernel.org/r/20251124063235.952136-2-gary.yang@cixtech.com
> Signed-off-by: Peter Chen <peter.chen@cixtech.com>
> ---
> .../devicetree/bindings/mfd/syscon.yaml | 7 +
> .../bindings/reset/cix,sky1-rst.yaml | 46 +++++
> .../soc/cix/cix,sky1-system-controller.yaml | 48 +++++
> include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> 5 files changed, 307 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
> index 55efb83b1495..be864a6b8efb 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
> @@ -170,6 +170,8 @@ properties:
> - cirrus,ep7209-syscon1
> - cirrus,ep7209-syscon2
> - cirrus,ep7209-syscon3
> + - cix,sky1-system-controller
> + - cix,sky1-s5-system-controller
> - cnxt,cx92755-uc
> - freecom,fsg-cs2-system-controller
> - fsl,imx93-aonmix-ns-syscfg
> @@ -254,6 +256,11 @@ properties:
> - const: microchip,pic64gx-sysreg-scb
> - const: microchip,mpfs-sysreg-scb
> - const: syscon
> + - items:
> + - enum:
> + - cix,sky1-system-controller
> + - cix,sky1-s5-system-controller
> + - const: syscon
Do not create your own style. Cix is not special. There is already an
enum for EVERYONE.
>
> reg:
> maxItems: 1
Independent patch. Please do not combine unrelated patches into one.
> diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> new file mode 100644
> index 000000000000..4323acdc2c45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CIX Sky1 Reset Controller
> +
> +maintainers:
> + - Gary Yang <gary.yang@cixtech.com>
> +
> +description: |
> + CIX Sky1 reset controller can be used to reset various set of peripherals.
> + There are two reset controllers, one is located in S0 domain, the other
> + is located in S0 and S5 domain.
> +
> + See also:
> + - include/dt-bindings/reset/cix,sky1-rst.h
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - cix,sky1-rst
> + - cix,sky1-rst-fch
> +
> + '#reset-cells':
> + const: 1
No resources? Then not a dedicated child node, but part of the syscon.
Fold this entire binding into the parent node.
> +
> +required:
> + - compatible
> + - '#reset-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + syscon@16000000 {
> + compatible = "cix,sky1-s5-system-controller", "syscon",
> + "simple-mfd";
Mess alignment.
> + reg = <0x0 0x16000000 0x0 0x1000>;
Does not belong here.
> + src: reset-controller {
> + compatible = "cix,sky1-rst";
> + #reset-cells = <1>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> new file mode 100644
> index 000000000000..f6e2776e3f53
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cix Sky1 SoC system controller register region
> +
> +maintainers:
> + - Gary Yang <gary.yang@cixtech.com>
> +
> +description:
> + An wide assortment of registers of the system controller on Sky1 SoC,
> + including resets and usb.
> +
> +allOf:
> + - $ref: /schemas/mfd/syscon.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - contains:
What? No, don't come with random code. There is no single code like this.
> + - enum:
> + - cix,sky1-system-controller
> + - cix,sky1-s5-system-controller
> + - const: syscon
> + - const: simple-mfd
Huh? You already documented this.
NAK, you are making random changes without any concept.
Read previous feedback. Really carefully.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-01-28 10:01 ` Krzysztof Kozlowski
@ 2026-01-28 10:14 ` Conor Dooley
0 siblings, 0 replies; 11+ messages in thread
From: Conor Dooley @ 2026-01-28 10:14 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Gary Yang, lee, robh, krzk+dt, conor+dt, p.zabel, peter.chen,
devicetree, linux-kernel, linux-arm-kernel, cix-kernel-upstream
[-- Attachment #1: Type: text/plain, Size: 6439 bytes --]
On Wed, Jan 28, 2026 at 11:01:40AM +0100, Krzysztof Kozlowski wrote:
> On 28/01/2026 10:36, Gary Yang wrote:
> > There are two reset controllers on Cix sky1 Soc.
> > One is located in S0 domain, and the other is located
> > in S0 and S5 domain.
>
> Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
> https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
>
> >
> > Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> > Link: https://lore.kernel.org/r/20251124063235.952136-2-gary.yang@cixtech.com
> > Signed-off-by: Peter Chen <peter.chen@cixtech.com>
> > ---
> > .../devicetree/bindings/mfd/syscon.yaml | 7 +
> > .../bindings/reset/cix,sky1-rst.yaml | 46 +++++
> > .../soc/cix/cix,sky1-system-controller.yaml | 48 +++++
> > include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> > include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> > 5 files changed, 307 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> > create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> > create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> > create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
> > index 55efb83b1495..be864a6b8efb 100644
> > --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
> > +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
> > @@ -170,6 +170,8 @@ properties:
> > - cirrus,ep7209-syscon1
> > - cirrus,ep7209-syscon2
> > - cirrus,ep7209-syscon3
> > + - cix,sky1-system-controller
> > + - cix,sky1-s5-system-controller
> > - cnxt,cx92755-uc
> > - freecom,fsg-cs2-system-controller
> > - fsl,imx93-aonmix-ns-syscfg
> > @@ -254,6 +256,11 @@ properties:
> > - const: microchip,pic64gx-sysreg-scb
> > - const: microchip,mpfs-sysreg-scb
> > - const: syscon
> > + - items:
> > + - enum:
> > + - cix,sky1-system-controller
> > + - cix,sky1-s5-system-controller
> > + - const: syscon
>
> Do not create your own style. Cix is not special. There is already an
> enum for EVERYONE.
>
> >
> > reg:
> > maxItems: 1
>
> Independent patch. Please do not combine unrelated patches into one.
Was mid reply when I saw this mail come through, just wanted to add the
one thing I had to say in excess of what you've written:
All the changes to syscon.yaml should be deleted, as it adds a competing
definition to the one in the dedicated file, and I am surprised
something like this passed testing.. Perhaps it passes if
DT_SCHEMA_FILES=syscon.yaml but it'd fail a real dtbs_check, right?
At v4, I'd be hoping for more thorough testing to be done.
Cheers,
Conor.
>
>
> > diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> > new file mode 100644
> > index 000000000000..4323acdc2c45
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> > @@ -0,0 +1,46 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: CIX Sky1 Reset Controller
> > +
> > +maintainers:
> > + - Gary Yang <gary.yang@cixtech.com>
> > +
> > +description: |
> > + CIX Sky1 reset controller can be used to reset various set of peripherals.
> > + There are two reset controllers, one is located in S0 domain, the other
> > + is located in S0 and S5 domain.
> > +
> > + See also:
> > + - include/dt-bindings/reset/cix,sky1-rst.h
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - cix,sky1-rst
> > + - cix,sky1-rst-fch
> > +
> > + '#reset-cells':
> > + const: 1
>
> No resources? Then not a dedicated child node, but part of the syscon.
> Fold this entire binding into the parent node.
>
> > +
> > +required:
> > + - compatible
> > + - '#reset-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + syscon@16000000 {
> > + compatible = "cix,sky1-s5-system-controller", "syscon",
> > + "simple-mfd";
>
> Mess alignment.
>
> > + reg = <0x0 0x16000000 0x0 0x1000>;
>
> Does not belong here.
>
> > + src: reset-controller {
> > + compatible = "cix,sky1-rst";
> > + #reset-cells = <1>;
> > + };
>
> > + };
> > diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> > new file mode 100644
> > index 000000000000..f6e2776e3f53
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> > @@ -0,0 +1,48 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-controller.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Cix Sky1 SoC system controller register region
> > +
> > +maintainers:
> > + - Gary Yang <gary.yang@cixtech.com>
> > +
> > +description:
> > + An wide assortment of registers of the system controller on Sky1 SoC,
> > + including resets and usb.
> > +
> > +allOf:
> > + - $ref: /schemas/mfd/syscon.yaml#
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - contains:
>
> What? No, don't come with random code. There is no single code like this.
>
> > + - enum:
> > + - cix,sky1-system-controller
> > + - cix,sky1-s5-system-controller
> > + - const: syscon
> > + - const: simple-mfd
>
> Huh? You already documented this.
>
> NAK, you are making random changes without any concept.
>
> Read previous feedback. Really carefully.
>
> Best regards,
> Krzysztof
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-01-28 9:36 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Gary Yang
2026-01-28 10:01 ` Krzysztof Kozlowski
@ 2026-01-28 11:22 ` Rob Herring (Arm)
1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring (Arm) @ 2026-01-28 11:22 UTC (permalink / raw)
To: Gary Yang
Cc: cix-kernel-upstream, devicetree, krzk+dt, p.zabel, peter.chen,
linux-arm-kernel, linux-kernel, lee, conor+dt
On Wed, 28 Jan 2026 17:36:09 +0800, Gary Yang wrote:
> There are two reset controllers on Cix sky1 Soc.
> One is located in S0 domain, and the other is located
> in S0 and S5 domain.
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> Link: https://lore.kernel.org/r/20251124063235.952136-2-gary.yang@cixtech.com
> Signed-off-by: Peter Chen <peter.chen@cixtech.com>
> ---
> .../devicetree/bindings/mfd/syscon.yaml | 7 +
> .../bindings/reset/cix,sky1-rst.yaml | 46 +++++
> .../soc/cix/cix,sky1-system-controller.yaml | 48 +++++
> include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> 5 files changed, 307 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: ignoring, error in schema: properties: compatible: oneOf: 0: contains
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-controller.yaml: properties:compatible:oneOf:0:contains: [{'enum': ['cix,sky1-system-controller', 'cix,sky1-s5-system-controller']}, {'const': 'syscon'}, {'const': 'simple-mfd'}] is not of type 'object', 'boolean'
Traceback (most recent call last):
File "/usr/local/bin/dt-doc-validate", line 8, in <module>
sys.exit(main())
~~~~^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/doc_validate.py", line 66, in main
ret |= check_doc(f)
~~~~~~~~~^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/doc_validate.py", line 37, in check_doc
dtsch.check_schema_refs()
~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/schema.py", line 241, in check_schema_refs
self._check_schema_refs(resolver, self)
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/schema.py", line 212, in _check_schema_refs
self._check_schema_refs(resolver, v, parent=k, is_common=is_common,
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
has_constraint=has_constraint)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/schema.py", line 216, in _check_schema_refs
self._check_schema_refs(resolver, schema[i], parent=parent, is_common=is_common,
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
has_constraint=has_constraint)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/schema.py", line 203, in _check_schema_refs
ref_sch = resolver.lookup(schema['$ref']).contents
~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
retrieved = self._registry.get_or_retrieve(uri)
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 422, in get_or_retrieve
registry = self.crawl()
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 500, in crawl
id = resource.id()
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 231, in id
id = self._specification.id_of(self.contents)
File "/usr/local/lib/python3.13/dist-packages/referencing/jsonschema.py", line 50, in _dollar_id
return contents.get("$id")
^^^^^^^^^^^^
AttributeError: 'list' object has no attribute 'get'
doc reference errors (make refcheckdocs):
See https://patchwork.kernel.org/project/devicetree/patch/20260128093611.1932770-2-gary.yang@cixtech.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 0/3] reset: cix: add support for cix sky1 resets
@ 2026-03-01 7:09 Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Xueyuan Chen @ 2026-03-01 7:09 UTC (permalink / raw)
To: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan
Cc: Gary Yang, CIX Linux Kernel Upstream Group, devicetree,
linux-arm-kernel, linux-kernel, Xueyuan Chen
This patch series adds support for the System Reset Controller (SRC)
found on the CIX Sky1 SoC. The SRC provides reset capabilities to various
peripherals across the S0 and S5 domains.
Changes in v4:
- Restored the 'syscon' architecture to properly describe the SRC as a
unified memory region, addressing DT review feedback from Conor Dooley on v3.
- Replaced the fragmented 'reg' items in the YAML bindings and DTS with
unified contiguous memory regions (e.g., 0x16000000 and 0x04160000).
- Refactored the driver to drop independent ioremap logic. It now cleanly
fetches the regmap via syscon_node_to_regmap to prevent resource conflicts.
- Xueyuan Chen took over the patchset for architectural refactoring.
Changes in v3:
- Passed dts build checks (dt_binding_check, CHECK_DTBS).
- Removed initial syscon attempt (reverted in v4 for the correct architecture).
Gary Yang (1):
dt-bindings: reset: add sky1 reset controller
Xueyuan Chen (2):
reset: cix: add support for cix sky1 resets
arm64: dts: cix: add src syscon nodes for sky1 resets
.../bindings/reset/cix,sky1-rst.yaml | 51 +++
arch/arm64/boot/dts/cix/sky1.dtsi | 12 +
drivers/reset/Kconfig | 7 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sky1.c | 372 ++++++++++++++++++
include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 ++
include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++
7 files changed, 649 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
create mode 100644 drivers/reset/reset-sky1.c
create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
--
2.43.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-03-01 7:09 [PATCH v4 0/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
@ 2026-03-01 7:09 ` Xueyuan Chen
2026-03-01 11:04 ` Krzysztof Kozlowski
2026-03-01 13:13 ` 回复: " Gary Yang
2026-03-01 7:09 ` [PATCH v4 2/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for " Xueyuan Chen
2 siblings, 2 replies; 11+ messages in thread
From: Xueyuan Chen @ 2026-03-01 7:09 UTC (permalink / raw)
To: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan
Cc: Gary Yang, CIX Linux Kernel Upstream Group, devicetree,
linux-arm-kernel, linux-kernel, Xueyuan Chen
From: Gary Yang <gary.yang@cixtech.com>
There are two reset controllers on Cix sky1 Soc.
One is located in S0 domain, and the other is located
in S5 domain.
[Xueyuan Chen: Refactored to a flat syscon architecture to fix v3 review issues]
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Co-developed-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
---
.../bindings/reset/cix,sky1-rst.yaml | 51 ++++++
include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
3 files changed, 257 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
new file mode 100644
index 000000000000..27b6df71c3e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX Sky1 Reset Register Region
+
+maintainers:
+ - Gary Yang <gary.yang@cixtech.com>
+ - Xueyuan Chen <xueyuan.chen21@gmail.com>
+
+description: |
+ An assortment of registers that control elements of the CIX Sky1 SoC,
+ including resets, clocks, among others.
+ The Reset block acts as a system controller (syscon) and provides
+ reset capabilities to various peripherals.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - cix,sky1-src-s5
+ - cix,sky1-src-fch
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ description:
+ The peripherals on the CIX Sky1 SoC have reset support.
+ The reset consumer should specify the desired peripheral via the
+ ID defined in include/dt-bindings/reset/cix,sky1-rst.h.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/cix,sky1-rst.h>
+ reset-controller@16000000 {
+ compatible = "cix,sky1-src-s5", "syscon";
+ reg = <0x16000000 0x1000>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/reset/cix,sky1-rst-fch.h b/include/dt-bindings/reset/cix,sky1-rst-fch.h
new file mode 100644
index 000000000000..8e67d7eb92aa
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-rst-fch.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_FCH_SKY1_H
+#define DT_BINDING_RESET_FCH_SKY1_H
+
+/* func reset for sky1 fch */
+
+#define SW_I3C0_RST_FUNC_G_N 0
+#define SW_I3C0_RST_FUNC_I_N 1
+#define SW_I3C1_RST_FUNC_G_N 2
+#define SW_I3C1_RST_FUNC_I_N 3
+#define SW_UART0_RST_FUNC_N 4
+#define SW_UART1_RST_FUNC_N 5
+#define SW_UART2_RST_FUNC_N 6
+#define SW_UART3_RST_FUNC_N 7
+#define SW_TIMER_RST_FUNC_N 8
+
+/* apb reset for sky1 fch */
+#define SW_I3C0_RST_APB_N 9
+#define SW_I3C1_RST_APB_N 10
+#define SW_DMA_RST_AXI_N 11
+#define SW_UART0_RST_APB_N 12
+#define SW_UART1_RST_APB_N 13
+#define SW_UART2_RST_APB_N 14
+#define SW_UART3_RST_APB_N 15
+#define SW_SPI0_RST_APB_N 16
+#define SW_SPI1_RST_APB_N 17
+#define SW_I2C0_RST_APB_N 18
+#define SW_I2C1_RST_APB_N 19
+#define SW_I2C2_RST_APB_N 20
+#define SW_I2C3_RST_APB_N 21
+#define SW_I2C4_RST_APB_N 22
+#define SW_I2C5_RST_APB_N 23
+#define SW_I2C6_RST_APB_N 24
+#define SW_I2C7_RST_APB_N 25
+#define SW_GPIO_RST_APB_N 26
+
+/* fch rst for xspi */
+#define SW_XSPI_REG_RST_N 27
+#define SW_XSPI_SYS_RST_N 28
+
+#endif
diff --git a/include/dt-bindings/reset/cix,sky1-rst.h b/include/dt-bindings/reset/cix,sky1-rst.h
new file mode 100644
index 000000000000..2f0990922aad
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-rst.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_SKY1_H
+#define DT_BINDING_RESET_SKY1_H
+
+/* reset for csu_pm */
+
+#define SKY1_CSU_PM_RESET_N 0
+#define SKY1_SENSORFUSION_RESET_N 1
+#define SKY1_SENSORFUSION_NOC_RESET_N 2
+
+/* reset group0 for s0 domain modules */
+#define SKY1_DDRC_RESET_N 3
+#define SKY1_GIC_RESET_N 4
+#define SKY1_CI700_RESET_N 5
+#define SKY1_SYS_NI700_RESET_N 6
+#define SKY1_MM_NI700_RESET_N 7
+#define SKY1_PCIE_NI700_RESET_N 8
+#define SKY1_GPU_RESET_N 9
+#define SKY1_NPUTOP_RESET_N 10
+#define SKY1_NPUCORE0_RESET_N 11
+#define SKY1_NPUCORE1_RESET_N 12
+#define SKY1_NPUCORE2_RESET_N 13
+#define SKY1_VPU_RESET_N 14
+#define SKY1_ISP_SRESET_N 15
+#define SKY1_ISP_ARESET_N 16
+#define SKY1_ISP_HRESET_N 17
+#define SKY1_ISP_GDCRESET_N 18
+#define SKY1_DPU_RESET0_N 19
+#define SKY1_DPU_RESET1_N 20
+#define SKY1_DPU_RESET2_N 21
+#define SKY1_DPU_RESET3_N 22
+#define SKY1_DPU_RESET4_N 23
+#define SKY1_DP_RESET0_N 24
+#define SKY1_DP_RESET1_N 25
+#define SKY1_DP_RESET2_N 26
+#define SKY1_DP_RESET3_N 27
+#define SKY1_DP_RESET4_N 28
+#define SKY1_DP_PHY_RST_N 29
+
+/* reset group1 for s0 domain modules */
+#define SKY1_AUDIO_HIFI5_RESET_N 30
+#define SKY1_AUDIO_HIFI5_NOC_RESET_N 31
+#define SKY1_CSIDPHY_PRST0_N 32
+#define SKY1_CSIDPHY_CMNRST0_N 33
+#define SKY1_CSI0_RST_N 34
+#define SKY1_CSIDPHY_PRST1_N 35
+#define SKY1_CSIDPHY_CMNRST1_N 36
+#define SKY1_CSI1_RST_N 37
+#define SKY1_CSI2_RST_N 38
+#define SKY1_CSI3_RST_N 39
+#define SKY1_CSIBRDGE0_RST_N 40
+#define SKY1_CSIBRDGE1_RST_N 41
+#define SKY1_CSIBRDGE2_RST_N 42
+#define SKY1_CSIBRDGE3_RST_N 43
+#define SKY1_GMAC0_RST_N 44
+#define SKY1_GMAC1_RST_N 45
+#define SKY1_PCIE0_RESET_N 46
+#define SKY1_PCIE1_RESET_N 47
+#define SKY1_PCIE2_RESET_N 48
+#define SKY1_PCIE3_RESET_N 49
+#define SKY1_PCIE4_RESET_N 50
+
+/* reset group1 for usb phys */
+#define SKY1_USB_DP_PHY0_PRST_N 51
+#define SKY1_USB_DP_PHY1_PRST_N 52
+#define SKY1_USB_DP_PHY2_PRST_N 53
+#define SKY1_USB_DP_PHY3_PRST_N 54
+#define SKY1_USB_DP_PHY0_RST_N 55
+#define SKY1_USB_DP_PHY1_RST_N 56
+#define SKY1_USB_DP_PHY2_RST_N 57
+#define SKY1_USB_DP_PHY3_RST_N 58
+#define SKY1_USBPHY_SS_PST_N 59
+#define SKY1_USBPHY_SS_RST_N 60
+#define SKY1_USBPHY_HS0_PRST_N 61
+#define SKY1_USBPHY_HS1_PRST_N 62
+#define SKY1_USBPHY_HS2_PRST_N 63
+#define SKY1_USBPHY_HS3_PRST_N 64
+#define SKY1_USBPHY_HS4_PRST_N 65
+#define SKY1_USBPHY_HS5_PRST_N 66
+#define SKY1_USBPHY_HS6_PRST_N 67
+#define SKY1_USBPHY_HS7_PRST_N 68
+#define SKY1_USBPHY_HS8_PRST_N 69
+#define SKY1_USBPHY_HS9_PRST_N 70
+
+/* reset group1 for usb controllers */
+#define SKY1_USBC_SS0_PRST_N 71
+#define SKY1_USBC_SS1_PRST_N 72
+#define SKY1_USBC_SS2_PRST_N 73
+#define SKY1_USBC_SS3_PRST_N 74
+#define SKY1_USBC_SS4_PRST_N 75
+#define SKY1_USBC_SS5_PRST_N 76
+#define SKY1_USBC_SS0_RST_N 77
+#define SKY1_USBC_SS1_RST_N 78
+#define SKY1_USBC_SS2_RST_N 79
+#define SKY1_USBC_SS3_RST_N 80
+#define SKY1_USBC_SS4_RST_N 81
+#define SKY1_USBC_SS5_RST_N 82
+#define SKY1_USBC_HS0_PRST_N 83
+#define SKY1_USBC_HS1_PRST_N 84
+#define SKY1_USBC_HS2_PRST_N 85
+#define SKY1_USBC_HS3_PRST_N 86
+#define SKY1_USBC_HS0_RST_N 87
+#define SKY1_USBC_HS1_RST_N 88
+#define SKY1_USBC_HS2_RST_N 89
+#define SKY1_USBC_HS3_RST_N 90
+
+/* reset group0 for rcsu */
+#define SKY1_AUDIO_RCSU_RESET_N 91
+#define SKY1_CI700_RCSU_RESET_N 92
+#define SKY1_CSI_RCSU0_RESET_N 93
+#define SKY1_CSI_RCSU1_RESET_N 94
+#define SKY1_CSU_PM_RCSU_RESET_N 95
+#define SKY1_DDR_BROADCAST_RCSU_RESET_N 96
+#define SKY1_DDR_CTRL_RCSU_0_RESET_N 97
+#define SKY1_DDR_CTRL_RCSU_1_RESET_N 98
+#define SKY1_DDR_CTRL_RCSU_2_RESET_N 99
+#define SKY1_DDR_CTRL_RCSU_3_RESET_N 100
+#define SKY1_DDR_TZC400_RCSU_0_RESET_N 101
+#define SKY1_DDR_TZC400_RCSU_1_RESET_N 102
+#define SKY1_DDR_TZC400_RCSU_2_RESET_N 103
+#define SKY1_DDR_TZC400_RCSU_3_RESET_N 104
+#define SKY1_DP0_RCSU_RESET_N 105
+#define SKY1_DP1_RCSU_RESET_N 106
+#define SKY1_DP2_RCSU_RESET_N 107
+#define SKY1_DP3_RCSU_RESET_N 108
+#define SKY1_DP4_RCSU_RESET_N 109
+#define SKY1_DPU0_RCSU_RESET_N 110
+#define SKY1_DPU1_RCSU_RESET_N 111
+#define SKY1_DPU2_RCSU_RESET_N 112
+#define SKY1_DPU3_RCSU_RESET_N 113
+#define SKY1_DPU4_RCSU_RESET_N 114
+#define SKY1_DSU_RCSU_RESET_N 115
+#define SKY1_FCH_RCSU_RESET_N 116
+#define SKY1_GICD_RCSU_RESET_N 117
+#define SKY1_GMAC_RCSU_RESET_N 118
+#define SKY1_GPU_RCSU_RESET_N 119
+#define SKY1_ISP_RCSU0_RESET_N 120
+#define SKY1_ISP_RCSU1_RESET_N 121
+#define SKY1_NI700_MMHUB_RCSU_RESET_N 122
+
+/* reset group1 for rcsu */
+#define SKY1_NPU_RCSU_RESET_N 123
+#define SKY1_NI700_PCIE_RCSU_RESET_N 124
+#define SKY1_PCIE_X421_RCSU_RESET_N 125
+#define SKY1_PCIE_X8_RCSU_RESET_N 126
+#define SKY1_SF_RCSU_RESET_N 127
+#define SKY1_RCSU_SMMU_MMHUB_RESET_N 128
+#define SKY1_RCSU_SMMU_PCIEHUB_RESET_N 129
+#define SKY1_RCSU_SYSHUB_RESET_N 130
+#define SKY1_NI700_SMN_RCSU_RESET_N 131
+#define SKY1_NI700_SYSHUB_RCSU_RESET_N 132
+#define SKY1_RCSU_USB2_HOST0_RESET_N 133
+#define SKY1_RCSU_USB2_HOST1_RESET_N 134
+#define SKY1_RCSU_USB2_HOST2_RESET_N 135
+#define SKY1_RCSU_USB2_HOST3_RESET_N 136
+#define SKY1_RCSU_USB3_TYPEA_DRD_RESET_N 137
+#define SKY1_RCSU_USB3_TYPEC_DRD_RESET_N 138
+#define SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N 139
+#define SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N 140
+#define SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N 141
+#define SKY1_VPU_RCSU_RESET_N 142
+
+#endif
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v4 2/3] reset: cix: add support for cix sky1 resets
2026-03-01 7:09 [PATCH v4 0/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
@ 2026-03-01 7:09 ` Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for " Xueyuan Chen
2 siblings, 0 replies; 11+ messages in thread
From: Xueyuan Chen @ 2026-03-01 7:09 UTC (permalink / raw)
To: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan
Cc: Gary Yang, CIX Linux Kernel Upstream Group, devicetree,
linux-arm-kernel, linux-kernel, Xueyuan Chen
There are two reset controllers on Cix Sky1 Soc.
One is located in S0 domain, and the other is located
in S5 domain.
[Xueyuan Chen: Refactored the architecture to use syscon.
Dropped independent ioremap logic. The driver now cleanly fetches
the regmap from its own syscon node to prevent resource conflicts.]
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
---
drivers/reset/Kconfig | 7 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sky1.c | 372 +++++++++++++++++++++++++++++++++++++
3 files changed, 380 insertions(+)
create mode 100644 drivers/reset/reset-sky1.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7ce151f6a7e4..2e42216c457c 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -291,6 +291,13 @@ config RESET_SIMPLE
- SiFive FU740 SoCs
- Sophgo SoCs
+config RESET_SKY1
+ bool "Cix Sky1 reset controller"
+ depends on HAS_IOMEM
+ depends on ARCH_CIX || COMPILE_TEST
+ help
+ This enables the reset controller for Cix Sky1.
+
config RESET_SOCFPGA
bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
default ARM && ARCH_INTEL_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index fc0cc99f8514..d1b8c66e5086 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
+obj-$(CONFIG_RESET_SKY1) += reset-sky1.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
diff --git a/drivers/reset/reset-sky1.c b/drivers/reset/reset-sky1.c
new file mode 100644
index 000000000000..333aa2b945ae
--- /dev/null
+++ b/drivers/reset/reset-sky1.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * CIX System Reset Controller (SRC) driver
+ *
+ * Author: Jerry Zhu <jerry.zhu@cixtech.com>
+ * Author: Xueyuan Chen <xueyuan.chen21@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/reset/cix,sky1-rst.h>
+#include <dt-bindings/reset/cix,sky1-rst-fch.h>
+
+#define SKY1_RESET_SLEEP_MIN_US 10000
+#define SKY1_RESET_SLEEP_MAX_US 20000
+
+struct sky1_src_signal {
+ unsigned int offset;
+ unsigned int bit;
+};
+
+struct sky1_src_variant {
+ const struct sky1_src_signal *signals;
+ unsigned int signals_num;
+ unsigned int domain;
+};
+
+struct sky1_src {
+ struct reset_controller_dev rcdev;
+ const struct sky1_src_signal *signals;
+ struct regmap *regmap;
+ unsigned int domain;
+};
+
+enum {
+ CSU_PM_RESET = 0x304,
+ SENSORFUSION_RESET = 0x308,
+ SENSORFUSION_NOC_RESET = 0x30c,
+ RESET_GROUP0_S0_DOMAIN_0 = 0x400,
+ RESET_GROUP0_S0_DOMAIN_1 = 0x404,
+ RESET_GROUP1_USB_PHYS = 0x408,
+ RESET_GROUP1_USB_CONTROLLERS = 0x40c,
+ RESET_GROUP0_RCSU = 0x800,
+ RESET_GROUP1_RCSU = 0x804,
+};
+
+static const struct sky1_src_signal sky1_src_signals[] = {
+ /* reset group1 for s0 domain modules */
+ [SKY1_CSU_PM_RESET_N] = { CSU_PM_RESET, BIT(0) },
+ [SKY1_SENSORFUSION_RESET_N] = { SENSORFUSION_RESET, BIT(0) },
+ [SKY1_SENSORFUSION_NOC_RESET_N] = { SENSORFUSION_NOC_RESET, BIT(0) },
+ [SKY1_DDRC_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(0) },
+ [SKY1_GIC_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(1) },
+ [SKY1_CI700_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(2) },
+ [SKY1_SYS_NI700_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(3) },
+ [SKY1_MM_NI700_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(4) },
+ [SKY1_PCIE_NI700_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(5) },
+ [SKY1_GPU_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(6) },
+ [SKY1_NPUTOP_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(7) },
+ [SKY1_NPUCORE0_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(8) },
+ [SKY1_NPUCORE1_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(9) },
+ [SKY1_NPUCORE2_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(10) },
+ [SKY1_VPU_RESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(11) },
+ [SKY1_ISP_SRESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(12) },
+ [SKY1_ISP_ARESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(13) },
+ [SKY1_ISP_HRESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(14) },
+ [SKY1_ISP_GDCRESET_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(15) },
+ [SKY1_DPU_RESET0_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(16) },
+ [SKY1_DPU_RESET1_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(17) },
+ [SKY1_DPU_RESET2_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(18) },
+ [SKY1_DPU_RESET3_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(19) },
+ [SKY1_DPU_RESET4_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(20) },
+ [SKY1_DP_RESET0_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(21) },
+ [SKY1_DP_RESET1_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(22) },
+ [SKY1_DP_RESET2_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(23) },
+ [SKY1_DP_RESET3_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(24) },
+ [SKY1_DP_RESET4_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(25) },
+ [SKY1_DP_PHY_RST_N] = { RESET_GROUP0_S0_DOMAIN_0, BIT(26) },
+
+ /* reset group1 for s0 domain modules */
+ [SKY1_AUDIO_HIFI5_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(0) },
+ [SKY1_AUDIO_HIFI5_NOC_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(1) },
+ [SKY1_CSIDPHY_PRST0_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(2) },
+ [SKY1_CSIDPHY_CMNRST0_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(3) },
+ [SKY1_CSI0_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(4) },
+ [SKY1_CSIDPHY_PRST1_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(5) },
+ [SKY1_CSIDPHY_CMNRST1_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(6) },
+ [SKY1_CSI1_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(7) },
+ [SKY1_CSI2_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(8) },
+ [SKY1_CSI3_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(9) },
+ [SKY1_CSIBRDGE0_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(10) },
+ [SKY1_CSIBRDGE1_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(11) },
+ [SKY1_CSIBRDGE2_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(12) },
+ [SKY1_CSIBRDGE3_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(13) },
+ [SKY1_GMAC0_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(14) },
+ [SKY1_GMAC1_RST_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(15) },
+ [SKY1_PCIE0_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(16) },
+ [SKY1_PCIE1_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(17) },
+ [SKY1_PCIE2_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(18) },
+ [SKY1_PCIE3_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(19) },
+ [SKY1_PCIE4_RESET_N] = { RESET_GROUP0_S0_DOMAIN_1, BIT(20) },
+
+ /* reset group1 for usb phys */
+ [SKY1_USB_DP_PHY0_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(0) },
+ [SKY1_USB_DP_PHY1_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(1) },
+ [SKY1_USB_DP_PHY2_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(2) },
+ [SKY1_USB_DP_PHY3_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(3) },
+ [SKY1_USB_DP_PHY0_RST_N] = { RESET_GROUP1_USB_PHYS, BIT(4) },
+ [SKY1_USB_DP_PHY1_RST_N] = { RESET_GROUP1_USB_PHYS, BIT(5) },
+ [SKY1_USB_DP_PHY2_RST_N] = { RESET_GROUP1_USB_PHYS, BIT(6) },
+ [SKY1_USB_DP_PHY3_RST_N] = { RESET_GROUP1_USB_PHYS, BIT(7) },
+ [SKY1_USBPHY_SS_PST_N] = { RESET_GROUP1_USB_PHYS, BIT(8) },
+ [SKY1_USBPHY_SS_RST_N] = { RESET_GROUP1_USB_PHYS, BIT(9) },
+ [SKY1_USBPHY_HS0_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(10) },
+ [SKY1_USBPHY_HS1_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(11) },
+ [SKY1_USBPHY_HS2_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(12) },
+ [SKY1_USBPHY_HS3_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(13) },
+ [SKY1_USBPHY_HS4_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(14) },
+ [SKY1_USBPHY_HS5_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(15) },
+ [SKY1_USBPHY_HS6_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(16) },
+ [SKY1_USBPHY_HS7_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(17) },
+ [SKY1_USBPHY_HS8_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(18) },
+ [SKY1_USBPHY_HS9_PRST_N] = { RESET_GROUP1_USB_PHYS, BIT(19) },
+
+ /* reset group1 for usb controllers */
+ [SKY1_USBC_SS0_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(0) },
+ [SKY1_USBC_SS1_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(1) },
+ [SKY1_USBC_SS2_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(2) },
+ [SKY1_USBC_SS3_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(3) },
+ [SKY1_USBC_SS4_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(4) },
+ [SKY1_USBC_SS5_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(5) },
+ [SKY1_USBC_SS0_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(6) },
+ [SKY1_USBC_SS1_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(7) },
+ [SKY1_USBC_SS2_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(8) },
+ [SKY1_USBC_SS3_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(9) },
+ [SKY1_USBC_SS4_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(10) },
+ [SKY1_USBC_SS5_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(11) },
+ [SKY1_USBC_HS0_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(12) },
+ [SKY1_USBC_HS1_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(13) },
+ [SKY1_USBC_HS2_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(14) },
+ [SKY1_USBC_HS3_PRST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(15) },
+ [SKY1_USBC_HS0_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(16) },
+ [SKY1_USBC_HS1_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(17) },
+ [SKY1_USBC_HS2_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(18) },
+ [SKY1_USBC_HS3_RST_N] = { RESET_GROUP1_USB_CONTROLLERS, BIT(19) },
+
+ /* reset group0 for rcsu */
+ [SKY1_AUDIO_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(0) },
+ [SKY1_CI700_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(1) },
+ [SKY1_CSI_RCSU0_RESET_N] = { RESET_GROUP0_RCSU, BIT(2) },
+ [SKY1_CSI_RCSU1_RESET_N] = { RESET_GROUP0_RCSU, BIT(3) },
+ [SKY1_CSU_PM_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(4) },
+ [SKY1_DDR_BROADCAST_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(5) },
+ [SKY1_DDR_CTRL_RCSU_0_RESET_N] = { RESET_GROUP0_RCSU, BIT(6) },
+ [SKY1_DDR_CTRL_RCSU_1_RESET_N] = { RESET_GROUP0_RCSU, BIT(7) },
+ [SKY1_DDR_CTRL_RCSU_2_RESET_N] = { RESET_GROUP0_RCSU, BIT(8) },
+ [SKY1_DDR_CTRL_RCSU_3_RESET_N] = { RESET_GROUP0_RCSU, BIT(9) },
+ [SKY1_DDR_TZC400_RCSU_0_RESET_N] = { RESET_GROUP0_RCSU, BIT(10) },
+ [SKY1_DDR_TZC400_RCSU_1_RESET_N] = { RESET_GROUP0_RCSU, BIT(11) },
+ [SKY1_DDR_TZC400_RCSU_2_RESET_N] = { RESET_GROUP0_RCSU, BIT(12) },
+ [SKY1_DDR_TZC400_RCSU_3_RESET_N] = { RESET_GROUP0_RCSU, BIT(13) },
+ [SKY1_DP0_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(14) },
+ [SKY1_DP1_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(15) },
+ [SKY1_DP2_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(16) },
+ [SKY1_DP3_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(17) },
+ [SKY1_DP4_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(18) },
+ [SKY1_DPU0_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(19) },
+ [SKY1_DPU1_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(20) },
+ [SKY1_DPU2_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(21) },
+ [SKY1_DPU3_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(22) },
+ [SKY1_DPU4_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(23) },
+ [SKY1_DSU_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(24) },
+ [SKY1_FCH_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(25) },
+ [SKY1_GICD_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(26) },
+ [SKY1_GMAC_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(27) },
+ [SKY1_GPU_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(28) },
+ [SKY1_ISP_RCSU0_RESET_N] = { RESET_GROUP0_RCSU, BIT(29) },
+ [SKY1_ISP_RCSU1_RESET_N] = { RESET_GROUP0_RCSU, BIT(30) },
+ [SKY1_NI700_MMHUB_RCSU_RESET_N] = { RESET_GROUP0_RCSU, BIT(31) },
+
+ /* reset group1 for rcsu */
+ [SKY1_NPU_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(0) },
+ [SKY1_NI700_PCIE_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(1) },
+ [SKY1_PCIE_X421_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(2) },
+ [SKY1_PCIE_X8_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(3) },
+ [SKY1_SF_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(4) },
+ [SKY1_RCSU_SMMU_MMHUB_RESET_N] = { RESET_GROUP1_RCSU, BIT(5) },
+ [SKY1_RCSU_SMMU_PCIEHUB_RESET_N] = { RESET_GROUP1_RCSU, BIT(6) },
+ [SKY1_RCSU_SYSHUB_RESET_N] = { RESET_GROUP1_RCSU, BIT(7) },
+ [SKY1_NI700_SMN_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(8) },
+ [SKY1_NI700_SYSHUB_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(9) },
+ [SKY1_RCSU_USB2_HOST0_RESET_N] = { RESET_GROUP1_RCSU, BIT(10) },
+ [SKY1_RCSU_USB2_HOST1_RESET_N] = { RESET_GROUP1_RCSU, BIT(11) },
+ [SKY1_RCSU_USB2_HOST2_RESET_N] = { RESET_GROUP1_RCSU, BIT(12) },
+ [SKY1_RCSU_USB2_HOST3_RESET_N] = { RESET_GROUP1_RCSU, BIT(13) },
+ [SKY1_RCSU_USB3_TYPEA_DRD_RESET_N] = { RESET_GROUP1_RCSU, BIT(14) },
+ [SKY1_RCSU_USB3_TYPEC_DRD_RESET_N] = { RESET_GROUP1_RCSU, BIT(15) },
+ [SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N] = { RESET_GROUP1_RCSU, BIT(16) },
+ [SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N] = { RESET_GROUP1_RCSU, BIT(17) },
+ [SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N] = { RESET_GROUP1_RCSU, BIT(18) },
+ [SKY1_VPU_RCSU_RESET_N] = { RESET_GROUP1_RCSU, BIT(19) },
+};
+
+enum {
+ FCH_SW_RST_FUNC = 0x8,
+ FCH_SW_RST_BUS = 0xc,
+ FCH_SW_XSPI = 0x10,
+};
+
+static const struct sky1_src_signal sky1_src_fch_signals[] = {
+ /* resets for fch_sw_rst_func */
+ [SW_I3C0_RST_FUNC_G_N] = { FCH_SW_RST_FUNC, BIT(0) },
+ [SW_I3C0_RST_FUNC_I_N] = { FCH_SW_RST_FUNC, BIT(1) },
+ [SW_I3C1_RST_FUNC_G_N] = { FCH_SW_RST_FUNC, BIT(2) },
+ [SW_I3C1_RST_FUNC_I_N] = { FCH_SW_RST_FUNC, BIT(3) },
+ [SW_UART0_RST_FUNC_N] = { FCH_SW_RST_FUNC, BIT(4) },
+ [SW_UART1_RST_FUNC_N] = { FCH_SW_RST_FUNC, BIT(5) },
+ [SW_UART2_RST_FUNC_N] = { FCH_SW_RST_FUNC, BIT(6) },
+ [SW_UART3_RST_FUNC_N] = { FCH_SW_RST_FUNC, BIT(7) },
+ [SW_TIMER_RST_FUNC_N] = { FCH_SW_RST_FUNC, BIT(20) },
+
+ /* resets for fch_sw_rst_bus */
+ [SW_I3C0_RST_APB_N] = { FCH_SW_RST_BUS, BIT(0) },
+ [SW_I3C1_RST_APB_N] = { FCH_SW_RST_BUS, BIT(1) },
+ [SW_DMA_RST_AXI_N] = { FCH_SW_RST_BUS, BIT(2) },
+ [SW_UART0_RST_APB_N] = { FCH_SW_RST_BUS, BIT(4) },
+ [SW_UART1_RST_APB_N] = { FCH_SW_RST_BUS, BIT(5) },
+ [SW_UART2_RST_APB_N] = { FCH_SW_RST_BUS, BIT(6) },
+ [SW_UART3_RST_APB_N] = { FCH_SW_RST_BUS, BIT(7) },
+ [SW_SPI0_RST_APB_N] = { FCH_SW_RST_BUS, BIT(8) },
+ [SW_SPI1_RST_APB_N] = { FCH_SW_RST_BUS, BIT(9) },
+ [SW_I2C0_RST_APB_N] = { FCH_SW_RST_BUS, BIT(12) },
+ [SW_I2C1_RST_APB_N] = { FCH_SW_RST_BUS, BIT(13) },
+ [SW_I2C2_RST_APB_N] = { FCH_SW_RST_BUS, BIT(14) },
+ [SW_I2C3_RST_APB_N] = { FCH_SW_RST_BUS, BIT(15) },
+ [SW_I2C4_RST_APB_N] = { FCH_SW_RST_BUS, BIT(16) },
+ [SW_I2C5_RST_APB_N] = { FCH_SW_RST_BUS, BIT(17) },
+ [SW_I2C6_RST_APB_N] = { FCH_SW_RST_BUS, BIT(18) },
+ [SW_I2C7_RST_APB_N] = { FCH_SW_RST_BUS, BIT(19) },
+ [SW_GPIO_RST_APB_N] = { FCH_SW_RST_BUS, BIT(21) },
+
+ /* resets for fch_sw_xspi */
+ [SW_XSPI_REG_RST_N] = { FCH_SW_XSPI, BIT(0) },
+ [SW_XSPI_SYS_RST_N] = { FCH_SW_XSPI, BIT(1) },
+};
+
+static struct sky1_src *to_sky1_src(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct sky1_src, rcdev);
+}
+
+static int sky1_reset_set(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct sky1_src *sky1src = to_sky1_src(rcdev);
+ const struct sky1_src_signal *signal = &sky1src->signals[id];
+ unsigned int value = assert ? 0 : sky1src->signals[id].bit;
+
+ return regmap_update_bits(sky1src->regmap,
+ signal->offset, signal->bit, value);
+}
+
+static int sky1_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ sky1_reset_set(rcdev, id, true);
+ usleep_range(SKY1_RESET_SLEEP_MIN_US,
+ SKY1_RESET_SLEEP_MAX_US);
+ return 0;
+}
+
+static int sky1_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ sky1_reset_set(rcdev, id, false);
+ usleep_range(SKY1_RESET_SLEEP_MIN_US,
+ SKY1_RESET_SLEEP_MAX_US);
+ return 0;
+}
+
+static int sky1_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ sky1_reset_assert(rcdev, id);
+ sky1_reset_deassert(rcdev, id);
+ return 0;
+}
+
+static int sky1_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ unsigned int value = 0;
+ struct sky1_src *sky1src = to_sky1_src(rcdev);
+ const struct sky1_src_signal *signal = &sky1src->signals[id];
+
+ regmap_read(sky1src->regmap, signal->offset, &value);
+ return !(value & signal->bit);
+}
+
+static const struct reset_control_ops sky1_src_ops = {
+ .reset = sky1_reset,
+ .assert = sky1_reset_assert,
+ .deassert = sky1_reset_deassert,
+ .status = sky1_reset_status
+};
+
+static const struct sky1_src_variant variant_sky1 = {
+ .signals = sky1_src_signals,
+ .signals_num = ARRAY_SIZE(sky1_src_signals),
+ .domain = 5,
+};
+
+static const struct sky1_src_variant variant_sky1_fch = {
+ .signals = sky1_src_fch_signals,
+ .signals_num = ARRAY_SIZE(sky1_src_fch_signals),
+ .domain = 0,
+};
+
+static int sky1_reset_probe(struct platform_device *pdev)
+{
+ struct sky1_src *sky1src;
+ struct device *dev = &pdev->dev;
+ const struct sky1_src_variant *variant = device_get_match_data(dev);
+
+ sky1src = devm_kzalloc(dev, sizeof(*sky1src), GFP_KERNEL);
+ if (!sky1src)
+ return -ENOMEM;
+
+ sky1src->regmap = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(sky1src->regmap))
+ return dev_err_probe(dev, PTR_ERR(sky1src->regmap),
+ "Unable to get parent syscon regmap");
+
+ sky1src->signals = variant->signals;
+ sky1src->rcdev.owner = THIS_MODULE;
+ sky1src->rcdev.nr_resets = variant->signals_num;
+ sky1src->rcdev.ops = &sky1_src_ops;
+ sky1src->rcdev.of_node = dev->of_node;
+ sky1src->rcdev.dev = dev;
+ sky1src->domain = variant->domain;
+
+ return devm_reset_controller_register(dev, &sky1src->rcdev);
+}
+
+static const struct of_device_id sky1_reset_dt_ids[] = {
+ { .compatible = "cix,sky1-src-s5", .data = &variant_sky1 },
+ { .compatible = "cix,sky1-src-fch", .data = &variant_sky1_fch },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sky1_reset_dt_ids);
+
+static struct platform_driver sky1_reset_driver = {
+ .probe = sky1_reset_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = sky1_reset_dt_ids,
+ },
+};
+module_platform_driver(sky1_reset_driver)
+
+MODULE_AUTHOR("Jerry Zhu <jerry.zhu@cixtech.com>");
+MODULE_AUTHOR("Xueyuan Chen <xueyuan.chen21@gmail.com>");
+MODULE_DESCRIPTION("Cix Sky1 reset driver");
+MODULE_LICENSE("GPL");
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for sky1 resets
2026-03-01 7:09 [PATCH v4 0/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 2/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
@ 2026-03-01 7:09 ` Xueyuan Chen
2026-03-01 11:05 ` Krzysztof Kozlowski
2 siblings, 1 reply; 11+ messages in thread
From: Xueyuan Chen @ 2026-03-01 7:09 UTC (permalink / raw)
To: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan
Cc: Gary Yang, CIX Linux Kernel Upstream Group, devicetree,
linux-arm-kernel, linux-kernel, Xueyuan Chen
Add the SRC blocks for the CIX Sky1 SoC. These blocks
provide reset capabilities to various peripherals across
the S0 and S5 domain.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
[Xueyuan Chen: Refactored to pure syscon nodes to fix v3 review issues]
Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
---
arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index fb8c826bbc97..6ad5dc368a66 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -348,6 +348,12 @@ i3c1: i3c@4100000 {
status = "disabled";
};
+ src_fch: reset-controller@4160000 {
+ compatible = "cix,sky1-src-fch", "syscon";
+ reg = <0x0 0x04160000 0x0 0x90>;
+ #reset-cells = <1>;
+ };
+
iomuxc: pinctrl@4170000 {
compatible = "cix,sky1-pinctrl";
reg = <0x0 0x04170000 0x0 0x1000>;
@@ -568,6 +574,12 @@ ppi_partition1: interrupt-partition-1 {
};
};
+ src_s5: reset-controller@16000000 {
+ compatible = "cix,sky1-src-s5", "syscon";
+ reg = <0x0 0x16000000 0x0 0x1000>;
+ #reset-cells = <1>;
+ };
+
iomuxc_s5: pinctrl@16007000 {
compatible = "cix,sky1-pinctrl-s5";
reg = <0x0 0x16007000 0x0 0x1000>;
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
@ 2026-03-01 11:04 ` Krzysztof Kozlowski
2026-03-01 13:13 ` 回复: " Gary Yang
1 sibling, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-01 11:04 UTC (permalink / raw)
To: Xueyuan Chen
Cc: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan, Gary Yang,
CIX Linux Kernel Upstream Group, devicetree, linux-arm-kernel,
linux-kernel
On Sun, Mar 01, 2026 at 03:09:08PM +0800, Xueyuan Chen wrote:
> From: Gary Yang <gary.yang@cixtech.com>
>
> There are two reset controllers on Cix sky1 Soc.
> One is located in S0 domain, and the other is located
> in S5 domain.
>
> [Xueyuan Chen: Refactored to a flat syscon architecture to fix v3 review issues]
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> Co-developed-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> ---
> .../bindings/reset/cix,sky1-rst.yaml | 51 ++++++
> include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> 3 files changed, 257 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
>
> diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> new file mode 100644
> index 000000000000..27b6df71c3e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CIX Sky1 Reset Register Region
> +
> +maintainers:
> + - Gary Yang <gary.yang@cixtech.com>
> + - Xueyuan Chen <xueyuan.chen21@gmail.com>
> +
> +description: |
> + An assortment of registers that control elements of the CIX Sky1 SoC,
> + including resets, clocks, among others.
> + The Reset block acts as a system controller (syscon) and provides
> + reset capabilities to various peripherals.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - cix,sky1-src-s5
> + - cix,sky1-src-fch
> + - const: syscon
I don't understand what is happening here.
Something VERY similar was sent as v9 and this is v4. Compatibles look
different, yet similar.
It looks like you just duplicated a lot bypassing 5 rounds of comments.
That would not be acceptable, we don't review just to be ignored.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for sky1 resets
2026-03-01 7:09 ` [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for " Xueyuan Chen
@ 2026-03-01 11:05 ` Krzysztof Kozlowski
0 siblings, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-01 11:05 UTC (permalink / raw)
To: Xueyuan Chen
Cc: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Peter Chen, Fugang Duan, Gary Yang,
CIX Linux Kernel Upstream Group, devicetree, linux-arm-kernel,
linux-kernel
On Sun, Mar 01, 2026 at 03:09:10PM +0800, Xueyuan Chen wrote:
> Add the SRC blocks for the CIX Sky1 SoC. These blocks
> provide reset capabilities to various peripherals across
> the S0 and S5 domain.
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> [Xueyuan Chen: Refactored to pure syscon nodes to fix v3 review issues]
v3? We are at v9!
> Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> ---
> arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index fb8c826bbc97..6ad5dc368a66 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -348,6 +348,12 @@ i3c1: i3c@4100000 {
> status = "disabled";
> };
>
> + src_fch: reset-controller@4160000 {
Random set of changes without any explanation.
> + compatible = "cix,sky1-src-fch", "syscon";
> + reg = <0x0 0x04160000 0x0 0x90>;
And here...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* 回复: [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
2026-03-01 11:04 ` Krzysztof Kozlowski
@ 2026-03-01 13:13 ` Gary Yang
1 sibling, 0 replies; 11+ messages in thread
From: Gary Yang @ 2026-03-01 13:13 UTC (permalink / raw)
To: Xueyuan Chen, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Peter Chen, Fugang Duan
Cc: cix-kernel-upstream, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Hi Xueyuan:
Surprise!
Why do you upstream our patch without our agreement?
Are you familiar to us Or our company?
We intend to delivery V10 next monday.
Best Regards
Gary
> EXTERNAL EMAIL
>
> From: Gary Yang <gary.yang@cixtech.com>
>
> There are two reset controllers on Cix sky1 Soc.
> One is located in S0 domain, and the other is located in S5 domain.
>
> [Xueyuan Chen: Refactored to a flat syscon architecture to fix v3 review issues]
>
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> Co-developed-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> Signed-off-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> ---
> .../bindings/reset/cix,sky1-rst.yaml | 51 ++++++
> include/dt-bindings/reset/cix,sky1-rst-fch.h | 42 +++++
> include/dt-bindings/reset/cix,sky1-rst.h | 164 ++++++++++++++++++
> 3 files changed, 257 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
>
> diff --git a/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> new file mode 100644
> index 000000000000..27b6df71c3e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/cix,sky1-rst.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/cix,sky1-rst.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CIX Sky1 Reset Register Region
> +
> +maintainers:
> + - Gary Yang <gary.yang@cixtech.com>
> + - Xueyuan Chen <xueyuan.chen21@gmail.com>
> +
> +description: |
> + An assortment of registers that control elements of the CIX Sky1 SoC,
> + including resets, clocks, among others.
> + The Reset block acts as a system controller (syscon) and provides
> + reset capabilities to various peripherals.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - cix,sky1-src-s5
> + - cix,sky1-src-fch
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + '#reset-cells':
> + description:
> + The peripherals on the CIX Sky1 SoC have reset support.
> + The reset consumer should specify the desired peripheral via the
> + ID defined in include/dt-bindings/reset/cix,sky1-rst.h.
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - '#reset-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/reset/cix,sky1-rst.h>
> + reset-controller@16000000 {
> + compatible = "cix,sky1-src-s5", "syscon";
> + reg = <0x16000000 0x1000>;
> + #reset-cells = <1>;
> + };
> diff --git a/include/dt-bindings/reset/cix,sky1-rst-fch.h
> b/include/dt-bindings/reset/cix,sky1-rst-fch.h
> new file mode 100644
> index 000000000000..8e67d7eb92aa
> --- /dev/null
> +++ b/include/dt-bindings/reset/cix,sky1-rst-fch.h
> @@ -0,0 +1,42 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */ #ifndef
> +DT_BINDING_RESET_FCH_SKY1_H #define DT_BINDING_RESET_FCH_SKY1_H
> +
> +/* func reset for sky1 fch */
> +
> +#define SW_I3C0_RST_FUNC_G_N 0
> +#define SW_I3C0_RST_FUNC_I_N 1
> +#define SW_I3C1_RST_FUNC_G_N 2
> +#define SW_I3C1_RST_FUNC_I_N 3
> +#define SW_UART0_RST_FUNC_N 4
> +#define SW_UART1_RST_FUNC_N 5
> +#define SW_UART2_RST_FUNC_N 6
> +#define SW_UART3_RST_FUNC_N 7
> +#define SW_TIMER_RST_FUNC_N 8
> +
> +/* apb reset for sky1 fch */
> +#define SW_I3C0_RST_APB_N 9
> +#define SW_I3C1_RST_APB_N 10
> +#define SW_DMA_RST_AXI_N 11
> +#define SW_UART0_RST_APB_N 12
> +#define SW_UART1_RST_APB_N 13
> +#define SW_UART2_RST_APB_N 14
> +#define SW_UART3_RST_APB_N 15
> +#define SW_SPI0_RST_APB_N 16
> +#define SW_SPI1_RST_APB_N 17
> +#define SW_I2C0_RST_APB_N 18
> +#define SW_I2C1_RST_APB_N 19
> +#define SW_I2C2_RST_APB_N 20
> +#define SW_I2C3_RST_APB_N 21
> +#define SW_I2C4_RST_APB_N 22
> +#define SW_I2C5_RST_APB_N 23
> +#define SW_I2C6_RST_APB_N 24
> +#define SW_I2C7_RST_APB_N 25
> +#define SW_GPIO_RST_APB_N 26
> +
> +/* fch rst for xspi */
> +#define SW_XSPI_REG_RST_N 27
> +#define SW_XSPI_SYS_RST_N 28
> +
> +#endif
> diff --git a/include/dt-bindings/reset/cix,sky1-rst.h
> b/include/dt-bindings/reset/cix,sky1-rst.h
> new file mode 100644
> index 000000000000..2f0990922aad
> --- /dev/null
> +++ b/include/dt-bindings/reset/cix,sky1-rst.h
> @@ -0,0 +1,164 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */ #ifndef
> +DT_BINDING_RESET_SKY1_H #define DT_BINDING_RESET_SKY1_H
> +
> +/* reset for csu_pm */
> +
> +#define SKY1_CSU_PM_RESET_N 0
> +#define SKY1_SENSORFUSION_RESET_N 1
> +#define SKY1_SENSORFUSION_NOC_RESET_N 2
> +
> +/* reset group0 for s0 domain modules */
> +#define SKY1_DDRC_RESET_N 3
> +#define SKY1_GIC_RESET_N 4
> +#define SKY1_CI700_RESET_N 5
> +#define SKY1_SYS_NI700_RESET_N 6
> +#define SKY1_MM_NI700_RESET_N 7
> +#define SKY1_PCIE_NI700_RESET_N 8
> +#define SKY1_GPU_RESET_N 9
> +#define SKY1_NPUTOP_RESET_N 10
> +#define SKY1_NPUCORE0_RESET_N 11
> +#define SKY1_NPUCORE1_RESET_N 12
> +#define SKY1_NPUCORE2_RESET_N 13
> +#define SKY1_VPU_RESET_N 14
> +#define SKY1_ISP_SRESET_N 15
> +#define SKY1_ISP_ARESET_N 16
> +#define SKY1_ISP_HRESET_N 17
> +#define SKY1_ISP_GDCRESET_N 18
> +#define SKY1_DPU_RESET0_N 19
> +#define SKY1_DPU_RESET1_N 20
> +#define SKY1_DPU_RESET2_N 21
> +#define SKY1_DPU_RESET3_N 22
> +#define SKY1_DPU_RESET4_N 23
> +#define SKY1_DP_RESET0_N 24
> +#define SKY1_DP_RESET1_N 25
> +#define SKY1_DP_RESET2_N 26
> +#define SKY1_DP_RESET3_N 27
> +#define SKY1_DP_RESET4_N 28
> +#define SKY1_DP_PHY_RST_N 29
> +
> +/* reset group1 for s0 domain modules */
> +#define SKY1_AUDIO_HIFI5_RESET_N 30
> +#define SKY1_AUDIO_HIFI5_NOC_RESET_N 31
> +#define SKY1_CSIDPHY_PRST0_N 32
> +#define SKY1_CSIDPHY_CMNRST0_N 33
> +#define SKY1_CSI0_RST_N 34
> +#define SKY1_CSIDPHY_PRST1_N 35
> +#define SKY1_CSIDPHY_CMNRST1_N 36
> +#define SKY1_CSI1_RST_N 37
> +#define SKY1_CSI2_RST_N 38
> +#define SKY1_CSI3_RST_N 39
> +#define SKY1_CSIBRDGE0_RST_N 40
> +#define SKY1_CSIBRDGE1_RST_N 41
> +#define SKY1_CSIBRDGE2_RST_N 42
> +#define SKY1_CSIBRDGE3_RST_N 43
> +#define SKY1_GMAC0_RST_N 44
> +#define SKY1_GMAC1_RST_N 45
> +#define SKY1_PCIE0_RESET_N 46
> +#define SKY1_PCIE1_RESET_N 47
> +#define SKY1_PCIE2_RESET_N 48
> +#define SKY1_PCIE3_RESET_N 49
> +#define SKY1_PCIE4_RESET_N 50
> +
> +/* reset group1 for usb phys */
> +#define SKY1_USB_DP_PHY0_PRST_N 51
> +#define SKY1_USB_DP_PHY1_PRST_N 52
> +#define SKY1_USB_DP_PHY2_PRST_N 53
> +#define SKY1_USB_DP_PHY3_PRST_N 54
> +#define SKY1_USB_DP_PHY0_RST_N 55
> +#define SKY1_USB_DP_PHY1_RST_N 56
> +#define SKY1_USB_DP_PHY2_RST_N 57
> +#define SKY1_USB_DP_PHY3_RST_N 58
> +#define SKY1_USBPHY_SS_PST_N 59
> +#define SKY1_USBPHY_SS_RST_N 60
> +#define SKY1_USBPHY_HS0_PRST_N 61
> +#define SKY1_USBPHY_HS1_PRST_N 62
> +#define SKY1_USBPHY_HS2_PRST_N 63
> +#define SKY1_USBPHY_HS3_PRST_N 64
> +#define SKY1_USBPHY_HS4_PRST_N 65
> +#define SKY1_USBPHY_HS5_PRST_N 66
> +#define SKY1_USBPHY_HS6_PRST_N 67
> +#define SKY1_USBPHY_HS7_PRST_N 68
> +#define SKY1_USBPHY_HS8_PRST_N 69
> +#define SKY1_USBPHY_HS9_PRST_N 70
> +
> +/* reset group1 for usb controllers */
> +#define SKY1_USBC_SS0_PRST_N 71
> +#define SKY1_USBC_SS1_PRST_N 72
> +#define SKY1_USBC_SS2_PRST_N 73
> +#define SKY1_USBC_SS3_PRST_N 74
> +#define SKY1_USBC_SS4_PRST_N 75
> +#define SKY1_USBC_SS5_PRST_N 76
> +#define SKY1_USBC_SS0_RST_N 77
> +#define SKY1_USBC_SS1_RST_N 78
> +#define SKY1_USBC_SS2_RST_N 79
> +#define SKY1_USBC_SS3_RST_N 80
> +#define SKY1_USBC_SS4_RST_N 81
> +#define SKY1_USBC_SS5_RST_N 82
> +#define SKY1_USBC_HS0_PRST_N 83
> +#define SKY1_USBC_HS1_PRST_N 84
> +#define SKY1_USBC_HS2_PRST_N 85
> +#define SKY1_USBC_HS3_PRST_N 86
> +#define SKY1_USBC_HS0_RST_N 87
> +#define SKY1_USBC_HS1_RST_N 88
> +#define SKY1_USBC_HS2_RST_N 89
> +#define SKY1_USBC_HS3_RST_N 90
> +
> +/* reset group0 for rcsu */
> +#define SKY1_AUDIO_RCSU_RESET_N 91
> +#define SKY1_CI700_RCSU_RESET_N 92
> +#define SKY1_CSI_RCSU0_RESET_N 93
> +#define SKY1_CSI_RCSU1_RESET_N 94
> +#define SKY1_CSU_PM_RCSU_RESET_N 95
> +#define SKY1_DDR_BROADCAST_RCSU_RESET_N 96
> +#define SKY1_DDR_CTRL_RCSU_0_RESET_N 97
> +#define SKY1_DDR_CTRL_RCSU_1_RESET_N 98
> +#define SKY1_DDR_CTRL_RCSU_2_RESET_N 99
> +#define SKY1_DDR_CTRL_RCSU_3_RESET_N 100
> +#define SKY1_DDR_TZC400_RCSU_0_RESET_N 101
> +#define SKY1_DDR_TZC400_RCSU_1_RESET_N 102
> +#define SKY1_DDR_TZC400_RCSU_2_RESET_N 103
> +#define SKY1_DDR_TZC400_RCSU_3_RESET_N 104
> +#define SKY1_DP0_RCSU_RESET_N 105
> +#define SKY1_DP1_RCSU_RESET_N 106
> +#define SKY1_DP2_RCSU_RESET_N 107
> +#define SKY1_DP3_RCSU_RESET_N 108
> +#define SKY1_DP4_RCSU_RESET_N 109
> +#define SKY1_DPU0_RCSU_RESET_N 110
> +#define SKY1_DPU1_RCSU_RESET_N 111
> +#define SKY1_DPU2_RCSU_RESET_N 112
> +#define SKY1_DPU3_RCSU_RESET_N 113
> +#define SKY1_DPU4_RCSU_RESET_N 114
> +#define SKY1_DSU_RCSU_RESET_N 115
> +#define SKY1_FCH_RCSU_RESET_N 116
> +#define SKY1_GICD_RCSU_RESET_N 117
> +#define SKY1_GMAC_RCSU_RESET_N 118
> +#define SKY1_GPU_RCSU_RESET_N 119
> +#define SKY1_ISP_RCSU0_RESET_N 120
> +#define SKY1_ISP_RCSU1_RESET_N 121
> +#define SKY1_NI700_MMHUB_RCSU_RESET_N 122
> +
> +/* reset group1 for rcsu */
> +#define SKY1_NPU_RCSU_RESET_N 123
> +#define SKY1_NI700_PCIE_RCSU_RESET_N 124
> +#define SKY1_PCIE_X421_RCSU_RESET_N 125
> +#define SKY1_PCIE_X8_RCSU_RESET_N 126
> +#define SKY1_SF_RCSU_RESET_N 127
> +#define SKY1_RCSU_SMMU_MMHUB_RESET_N 128
> +#define SKY1_RCSU_SMMU_PCIEHUB_RESET_N 129
> +#define SKY1_RCSU_SYSHUB_RESET_N 130
> +#define SKY1_NI700_SMN_RCSU_RESET_N 131
> +#define SKY1_NI700_SYSHUB_RCSU_RESET_N 132
> +#define SKY1_RCSU_USB2_HOST0_RESET_N 133
> +#define SKY1_RCSU_USB2_HOST1_RESET_N 134
> +#define SKY1_RCSU_USB2_HOST2_RESET_N 135
> +#define SKY1_RCSU_USB2_HOST3_RESET_N 136
> +#define SKY1_RCSU_USB3_TYPEA_DRD_RESET_N 137
> +#define SKY1_RCSU_USB3_TYPEC_DRD_RESET_N 138
> +#define SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N 139
> +#define SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N 140
> +#define SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N 141
> +#define SKY1_VPU_RCSU_RESET_N 142
> +
> +#endif
> --
> 2.43.0
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2026-03-01 13:35 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-01 7:09 [PATCH v4 0/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Xueyuan Chen
2026-03-01 11:04 ` Krzysztof Kozlowski
2026-03-01 13:13 ` 回复: " Gary Yang
2026-03-01 7:09 ` [PATCH v4 2/3] reset: cix: add support for cix sky1 resets Xueyuan Chen
2026-03-01 7:09 ` [PATCH v4 3/3] arm64: dts: cix: add src syscon nodes for " Xueyuan Chen
2026-03-01 11:05 ` Krzysztof Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2026-01-28 9:36 [PATCH v4 0/3] Add support for Cix Sky1 resets Gary Yang
2026-01-28 9:36 ` [PATCH v4 1/3] dt-bindings: reset: add sky1 reset controller Gary Yang
2026-01-28 10:01 ` Krzysztof Kozlowski
2026-01-28 10:14 ` Conor Dooley
2026-01-28 11:22 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox