public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Zi-Yu Chen <zychennvt@gmail.com>
To: andi.shyti@kernel.org, ychuang3@nuvoton.com
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, zychennvt@gmail.com
Subject: [PATCH 3/3] arm64: dts: nuvoton: Add I2C nodes for MA35D1 SoC
Date: Mon,  2 Mar 2026 02:08:22 +0000	[thread overview]
Message-ID: <20260302020822.13936-4-zychennvt@gmail.com> (raw)
In-Reply-To: <20260302020822.13936-1-zychennvt@gmail.com>

Add I2C controller nodes to the MA35D1 SoC dtsi.
Also enable the I2C interfaces on the MA35D1 SOM board
to allow communication with onboard peripherals.

Signed-off-by: Zi-Yu Chen <zychennvt@gmail.com>
---
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 14 ++++
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 65 +++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..2a8f0fd90ded 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -98,6 +98,14 @@ pinctrl_uart16: uart16-pins {
 			power-source = <1>;
 		};
 	};
+	i2c-grp {
+		pinctrl_i2c1: i2c1-pins {
+			nuvoton,pins = <1 10 12>,
+				       <1 11 12>;
+			bias-disable;
+		};
+
+	};
 };
 
 &uart0 {
@@ -129,3 +137,9 @@ &uart16 {
 	pinctrl-0 = <&pinctrl_uart16>;
 	status = "okay";
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..36bd19e37b57 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -17,6 +17,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c2;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -372,6 +376,66 @@ uart15: serial@407f0000 {
 			status = "disabled";
 		};
 
+		i2c1: i2c@40810000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40810000 0x0 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C1_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@40820000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40820000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C2_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@40830000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40830000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C3_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@40840000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40840000 0x0 0x1000>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C4_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@40850000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40850000 0x0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C5_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		uart16: serial@40880000 {
 			compatible = "nuvoton,ma35d1-uart";
 			reg = <0x0 0x40880000 0x0 0x100>;
@@ -379,5 +443,6 @@ uart16: serial@40880000 {
 			clocks = <&clk UART16_GATE>;
 			status = "disabled";
 		};
+
 	};
 };
-- 
2.34.1



  parent reply	other threads:[~2026-03-02  2:09 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-02  2:08 [PATCH 0/3] Add support for MA35D1 I2C controller Zi-Yu Chen
2026-03-02  2:08 ` [PATCH 1/3] dt-bindings: i2c: nuvoton,ma35d1-i2c: Add " Zi-Yu Chen
2026-03-02  7:20   ` Krzysztof Kozlowski
2026-03-03  0:57     ` zychen
2026-03-02  2:08 ` [PATCH 2/3] i2c: ma35d1: Add Nuvoton MA35D1 I2C driver support Zi-Yu Chen
2026-03-02  7:24   ` Krzysztof Kozlowski
2026-03-02  9:39     ` zychen
2026-03-02  2:08 ` Zi-Yu Chen [this message]
2026-03-02  7:25   ` [PATCH 3/3] arm64: dts: nuvoton: Add I2C nodes for MA35D1 SoC Krzysztof Kozlowski
2026-03-02  8:06     ` zychen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260302020822.13936-4-zychennvt@gmail.com \
    --to=zychennvt@gmail.com \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=ychuang3@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox