From: Gary Yang <gary.yang@cixtech.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
p.zabel@pengutronix.de, peter.chen@cixtech.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
cix-kernel-upstream@cixtech.com,
Gary Yang <gary.yang@cixtech.com>
Subject: [PATCH v10 0/3] Add support for Cix Sky1 resets
Date: Mon, 2 Mar 2026 14:44:04 +0800 [thread overview]
Message-ID: <20260302064407.1914014-1-gary.yang@cixtech.com> (raw)
Patch 1: Add yaml file for Cix Sky1 resets
Patch 2: Add driver codes for Cix Sky1 resets
Patch 3: Add dts nodes for Cix Sky1 resets
v10 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- rename dt-bindings header file
v9 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
v8 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- remove "simple-mfd" strings
v7 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix build warning
v6 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style
v5 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-controller.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style
v4 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- add syscon
- refine reset driver
- fix dt-bindings style
v3 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- remove syscon
v2 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix dt-bindings style
- refine reset driver
Gary Yang (3):
dt-bindings: soc: cix: document the syscon on Sky1 SoC
reset: add Sky1 soc reset support
arm64: dts: cix: add support for cix sky1 resets
.../soc/cix/cix,sky1-system-control.yaml | 42 ++
arch/arm64/boot/dts/cix/sky1.dtsi | 12 +
drivers/reset/Kconfig | 7 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sky1.c | 367 ++++++++++++++++++
.../reset/cix,sky1-s5-system-control.h | 163 ++++++++
.../reset/cix,sky1-system-control.h | 41 ++
7 files changed, 633 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
create mode 100644 drivers/reset/reset-sky1.c
create mode 100644 include/dt-bindings/reset/cix,sky1-s5-system-control.h
create mode 100644 include/dt-bindings/reset/cix,sky1-system-control.h
--
2.49.0
next reply other threads:[~2026-03-02 6:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-02 6:44 Gary Yang [this message]
2026-03-02 6:44 ` [PATCH v10 1/3] dt-bindings: soc: cix: document the syscon on Sky1 SoC Gary Yang
2026-03-03 6:29 ` Krzysztof Kozlowski
2026-03-02 6:44 ` [PATCH v10 2/3] reset: add Sky1 soc reset support Gary Yang
2026-03-09 11:06 ` Philipp Zabel
2026-03-02 6:44 ` [PATCH v10 3/3] arm64: dts: cix: add support for cix sky1 resets Gary Yang
2026-03-11 3:08 ` Peter Chen
2026-03-09 11:08 ` [PATCH v10 0/3] Add support for Cix Sky1 resets Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260302064407.1914014-1-gary.yang@cixtech.com \
--to=gary.yang@cixtech.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox