From: Balakrishnan Sambath <balakrishnan.s@microchip.com>
To: <linux-watchdog@vger.kernel.org>
Cc: <wim@linux-watchdog.org>, <linux@roeck-us.net>,
<alexandre.belloni@bootlin.com>, <andrei.simion@microchip.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>
Subject: [PATCH 2/2] watchdog: at91sam9_wdt.h: Document WDDIS bit position per SoC family
Date: Mon, 2 Mar 2026 17:03:10 +0530 [thread overview]
Message-ID: <20260302113310.133989-3-balakrishnan.s@microchip.com> (raw)
In-Reply-To: <20260302113310.133989-1-balakrishnan.s@microchip.com>
AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and
AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update
comments to reflect this and add SAMA7G5 and SAM9X75 datasheet
references to the file header.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
drivers/watchdog/at91sam9_wdt.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 298d545df1a1..2020694f8f6f 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -3,40 +3,42 @@
* drivers/watchdog/at91sam9_wdt.h
*
* Copyright (C) 2007 Andrew Victor
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
*
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
* Based on SAM9X60 datasheet.
+ * Based on SAMA7G5 datasheet.
+ * Based on SAM9X75 datasheet.
*
*/
#ifndef AT91_WDT_H
#define AT91_WDT_H
#include <linux/bits.h>
#define AT91_WDT_CR 0x00 /* Watchdog Control Register */
#define AT91_WDT_WDRSTT BIT(0) /* Restart */
#define AT91_WDT_KEY (0xa5UL << 24) /* KEY Password */
#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */
#define AT91_WDT_WDV (0xfffUL << 0) /* Counter Value */
#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV)
#define AT91_SAM9X60_PERIODRST BIT(4) /* Period Reset */
#define AT91_SAM9X60_RPTHRST BIT(5) /* Minimum Restart Period */
#define AT91_WDT_WDFIEN BIT(12) /* Fault Interrupt Enable */
-#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable */
+#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable (SAM9X60, SAMA7G5, SAM9X75) */
#define AT91_WDT_WDRSTEN BIT(13) /* Reset Processor */
#define AT91_WDT_WDRPROC BIT(14) /* Timer Restart */
-#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable */
+#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable (SAMA5, AT91SAM9261) */
#define AT91_WDT_WDD (0xfffUL << 16) /* Delta Value */
#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD)
#define AT91_WDT_WDDBGHLT BIT(28) /* Debug Halt */
#define AT91_WDT_WDIDLEHLT BIT(29) /* Idle Halt */
#define AT91_WDT_SR 0x08 /* Watchdog Status Register */
#define AT91_WDT_WDUNF BIT(0) /* Watchdog Underflow */
#define AT91_WDT_WDERR BIT(1) /* Watchdog Error */
--
2.34.1
next prev parent reply other threads:[~2026-03-02 11:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-02 11:33 [PATCH v2 0/2] watchdog: sama5d4_wdt: Fix WDDIS handling for SAM9X60 and SAMA7G5 Balakrishnan Sambath
2026-03-02 11:33 ` [PATCH 1/2] watchdog: sama5d4_wdt: Fix WDDIS detection on " Balakrishnan Sambath
2026-03-02 14:32 ` Alexandre Belloni
2026-03-02 11:33 ` Balakrishnan Sambath [this message]
2026-03-02 14:32 ` [PATCH 2/2] watchdog: at91sam9_wdt.h: Document WDDIS bit position per SoC family Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260302113310.133989-3-balakrishnan.s@microchip.com \
--to=balakrishnan.s@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrei.simion@microchip.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=nicolas.ferre@microchip.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox