From: Emanuele Ghidoli <ghidoliemanuele@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1] arm64: dts: freescale: imx95-toradex-smarc: Support Cortex M7
Date: Tue, 3 Mar 2026 13:13:06 +0100 [thread overview]
Message-ID: <20260303121324.1576841-1-ghidoliemanuele@gmail.com> (raw)
From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Enable Cortex M7, the vring nodes, a mailbox and reserve DDR memory for
the M7. The remoteproc framework is so capable to load and run the M7
firmware.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
---
.../dts/freescale/imx95-toradex-smarc.dtsi | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
index 5932ba238a8a..77c4a6dee098 100644
--- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
@@ -42,6 +42,16 @@ clk_serdes_eth_ref: clock-eth-ref {
enable-gpios = <&som_gpio_expander_1 13 GPIO_ACTIVE_HIGH>;
};
+ cm7: remoteproc-cm7 {
+ compatible = "fsl,imx95-cm7";
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu7 0 1
+ &mu7 1 1
+ &mu7 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>, <&m7_reserved>;
+ };
+
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
/* SMARC P64 - USB0_OTG_ID */
@@ -156,6 +166,42 @@ linux_cma: linux,cma {
alloc-ranges = <0 0x80000000 0 0x7f000000>;
linux,cma-default;
};
+
+ m7_reserved: memory@80000000 {
+ reg = <0 0x80000000 0 0x1000000>;
+ no-map;
+ };
+
+ rsc_table: memory@88220000 {
+ reg = <0 0x88220000 0 0x1000>;
+ no-map;
+ };
+
+ vdev0vring0: memory@88000000 {
+ reg = <0 0x88000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: memory@88008000 {
+ reg = <0 0x88008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: memory@88010000 {
+ reg = <0 0x88010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: memory@88018000 {
+ reg = <0 0x88018000 0 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: memory@88020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x88020000 0 0x100000>;
+ no-map;
+ };
};
};
@@ -572,6 +618,10 @@ &lpuart3 {
pinctrl-0 = <&pinctrl_uart3>;
};
+&mu7 {
+ status = "okay";
+};
+
/* SMARC MDIO, shared between all ethernet ports */
&netc_emdio {
pinctrl-names = "default";
--
2.43.0
next reply other threads:[~2026-03-03 12:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-03 12:13 Emanuele Ghidoli [this message]
2026-03-03 15:38 ` [PATCH v1] arm64: dts: freescale: imx95-toradex-smarc: Support Cortex M7 Frank Li
2026-03-03 15:55 ` Emanuele Ghidoli
2026-03-05 1:14 ` Peng Fan
2026-03-03 21:01 ` Frank Li
2026-03-04 15:52 ` Krzysztof Kozlowski
2026-03-04 16:11 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260303121324.1576841-1-ghidoliemanuele@gmail.com \
--to=ghidoliemanuele@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emanuele.ghidoli@toradex.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox