[PATCH 1/2] arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus

[Andrew Davis <afd@ti.com>]

This node describes a memory address range containing several sub-regions
with control registers for various IP in the MAIN domain of this SoC. It
was described as a "ti,j721e-system-controller" but this is a J7200 SoC
with is not compatible with the system controller region found in J721e.

No project consuming this DT has been found that makes use of the syscon
compatible for this region, to prevent any from using this node like a
generic syscon region in the future, make this a normal simple-bus as
it should have been from the start.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 628ff89dd72f7..67fde5667b8d9 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,9 +25,8 @@ atf-sram@0 {
 		};
 	};
 
-	scm_conf: scm-conf@100000 {
-		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
-		reg = <0x00 0x00100000 0x00 0x1c000>;
+	scm_conf: bus@100000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
-- 
2.39.2