Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Xu Yang <xu.yang_2@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, jun.li@nxp.com
Subject: [PATCH 1/2] arm64: dts: imx94: add USB nodes
Date: Thu,  5 Mar 2026 15:55:26 +0800	[thread overview]
Message-ID: <20260305075527.1116943-1-xu.yang_2@nxp.com> (raw)

add USB2.0, USB3.0 controller and USB phy nodes.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx94.dtsi | 61 ++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index d2f31c8caf6e..8384166400e9 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -161,6 +161,13 @@ its: msi-controller@48040000 {
 		};
 	};
 
+	usbphynop: usbphynop {
+		compatible = "usb-nop-xceiv";
+		clocks = <&scmi_clk IMX94_CLK_HSIO>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -1223,6 +1230,60 @@ wdog3: watchdog@49220000 {
 			};
 		};
 
+		usb3: usb@4c100000 {
+			compatible = "nxp,imx94-dwc3", "nxp,imx8mp-dwc3";
+			reg = <0x0 0x4c100000 0x0 0x10000>,
+			      <0x0 0x4c010010 0x0 0x04>,
+			      <0x0 0x4c1f0000 0x0 0x20>;
+			reg-names = "core", "blkctl", "glue";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_24M>,
+				 <&scmi_clk IMX94_CLK_32K>;
+			clock-names = "hsio", "bus_early", "ref", "suspend";
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3", "wakeup";
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			phys = <&usb3_phy>, <&usb3_phy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,gfladj-refclk-lpm-sel-quirk;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb3_phy: phy@4c1f0040 {
+			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+			reg = <0x0 0x4c1f0040 0x0 0x40>,
+			      <0x0 0x4c1fc000 0x0 0x100>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>;
+			clock-names = "phy";
+			#phy-cells = <0>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		usb2: usb@4c200000 {
+			compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x0 0x4c200000 0x0 0x200>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_32K>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			phys = <&usbphynop>;
+			fsl,usbmisc = <&usbmisc 0>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@4c200200 {
+			compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+			reg = <0x0 0x4c200200 0x0 0x200>,
+			      <0x0 0x4c010014 0x0 0x04>;
+			#index-cells = <1>;
+		};
+
 		netc_blk_ctrl: system-controller@4ceb0000 {
 			compatible = "nxp,imx94-netc-blk-ctrl";
 			reg = <0x0 0x4ceb0000 0x0 0x10000>,
-- 
2.34.1



             reply	other threads:[~2026-03-05  7:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-05  7:55 Xu Yang [this message]
2026-03-05  7:55 ` [PATCH 2/2] arm64: dts: imx943-evk: add Type-C node and enable USB node Xu Yang
2026-03-05 15:42   ` Frank Li
2026-03-06 10:00     ` Xu Yang
2026-03-05 15:35 ` [PATCH 1/2] arm64: dts: imx94: add USB nodes Frank Li
2026-03-06 10:01   ` Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260305075527.1116943-1-xu.yang_2@nxp.com \
    --to=xu.yang_2@nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox