From: Alexey Charkov <alchark@flipper.net>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Gene Chen <gene_chen@richtek.com>,
Heiko Stuebner <heiko@sntech.de>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
Alexey Charkov <alchark@flipper.net>
Subject: [PATCH 3/4] usb: typec: tcpci_rt1711h: Add support for Hynetek HUSB311
Date: Wed, 11 Mar 2026 20:20:46 +0400 [thread overview]
Message-ID: <20260311-husb311-v1-3-f25bcb58cff7@flipper.net> (raw)
In-Reply-To: <20260311-husb311-v1-0-f25bcb58cff7@flipper.net>
HUSB311 is a pin-compatible and register-compatible drop-in replacement
for RT1711H, so add its IDs to the existing driver.
Link: https://www.hynetek.com/uploadfiles/site/219/news/0863c0c7-f535-4f09-bacd-0440d2c21088.pdf
Link: https://dl.xkwy2018.com/downloads/RK3588S/03_Product%20Line%20Branch_Tablet/02_Key%20Device%20Specifications/HUSB311%20introduction%2020210526.pdf
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
drivers/usb/typec/tcpm/tcpci_rt1711h.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index 88c50b984e8a..ac5917c1e253 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -18,6 +18,9 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#define HUSB311_VID 0x2E99
+#define HUSB311_PID 0x0311
+#define HUSB311_DID 0x0000
#define RT1711H_VID 0x29CF
#define RT1711H_PID 0x1711
#define RT1711H_DID 0x2171
@@ -55,6 +58,8 @@
struct rt1711h_chip_info {
u32 rxdz_sel;
+ u16 vid;
+ u16 pid;
u16 did;
bool enable_pd30_extended_message;
};
@@ -308,14 +313,14 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c
ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID);
if (ret < 0)
return ret;
- if (ret != RT1711H_VID) {
+ if (ret != chip->info->vid) {
dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret);
return -ENODEV;
}
ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID);
if (ret < 0)
return ret;
- if (ret != RT1711H_PID) {
+ if (ret != chip->info->pid) {
dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
return -ENODEV;
}
@@ -405,17 +410,28 @@ static void rt1711h_remove(struct i2c_client *client)
tcpci_unregister_port(chip->tcpci);
}
+static const struct rt1711h_chip_info husb311 = {
+ .vid = HUSB311_VID,
+ .pid = HUSB311_PID,
+ .did = HUSB311_DID,
+};
+
static const struct rt1711h_chip_info rt1711h = {
+ .vid = RT1711H_VID,
+ .pid = RT1711H_PID,
.did = RT1711H_DID,
};
static const struct rt1711h_chip_info rt1715 = {
.rxdz_sel = RT1711H_BMCIO_RXDZSEL,
+ .vid = RT1711H_VID,
+ .pid = RT1711H_PID,
.did = RT1715_DID,
.enable_pd30_extended_message = true,
};
static const struct i2c_device_id rt1711h_id[] = {
+ { "husb311", (kernel_ulong_t)&husb311 },
{ "rt1711h", (kernel_ulong_t)&rt1711h },
{ "rt1715", (kernel_ulong_t)&rt1715 },
{}
@@ -423,6 +439,7 @@ static const struct i2c_device_id rt1711h_id[] = {
MODULE_DEVICE_TABLE(i2c, rt1711h_id);
static const struct of_device_id rt1711h_of_match[] = {
+ { .compatible = "hynetek,husb311", .data = &husb311 },
{ .compatible = "richtek,rt1711h", .data = &rt1711h },
{ .compatible = "richtek,rt1715", .data = &rt1715 },
{}
--
2.52.0
next prev parent reply other threads:[~2026-03-11 16:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-11 16:20 [PATCH 0/4] Add HUSB311 Type-C controller Alexey Charkov
2026-03-11 16:20 ` [PATCH 1/4] dt-bindings: vendor-prefixes: Add Hynetek Semiconductor Co., Ltd Alexey Charkov
2026-03-11 18:30 ` Conor Dooley
2026-03-11 16:20 ` [PATCH 2/4] dt-bindings: usb: richtek,rt1711h: Add Hynetek HUSB311 Alexey Charkov
2026-03-11 16:20 ` Alexey Charkov [this message]
2026-03-11 18:32 ` [PATCH 3/4] usb: typec: tcpci_rt1711h: Add support for " Conor Dooley
2026-03-12 7:09 ` Alexey Charkov
2026-03-12 11:17 ` Conor Dooley
2026-03-11 16:20 ` [PATCH 4/4] arm64: dts: rockchip: Add HUSB311 Type-C controller on RK3576 EVB1 Alexey Charkov
2026-03-11 18:32 ` [PATCH 0/4] Add HUSB311 Type-C controller Dragan Simic
2026-03-12 6:54 ` Alexey Charkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260311-husb311-v1-3-f25bcb58cff7@flipper.net \
--to=alchark@flipper.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gene_chen@richtek.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox