Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: aspeedyh <yh_chung@aspeedtech.com>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>,
	Ryan Chen <ryan_chen@aspeedtech.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	openbmc@lists.ozlabs.org, maciej.lawniczak@intel.com,
	broonie@kernel.org
Subject: Re: [PATCH 0/7] soc: aspeed: Add AST2600 eSPI controller support
Date: Fri, 13 Mar 2026 16:24:22 +0000	[thread overview]
Message-ID: <20260313-energy-casket-ca8adc1f1fd1@spud> (raw)
In-Reply-To: <20260313-upstream_espi-v1-0-9504428e1f43@aspeedtech.com>

[-- Attachment #1: Type: text/plain, Size: 2895 bytes --]

On Fri, Mar 13, 2026 at 06:07:35PM +0800, aspeedyh wrote:
> This series adds initial support for the eSPI controller found on ASPEED
> AST2600 BMC SoCs.
> 
> The series introduces a eSPI controller framework for ASPEED SoCs under
> drivers/soc/aspeed/, adds AST2600-specific controller support for
> peripheral and flash channels, defines the corresponding devicetree 
> binding, and adds the AST2600 eSPI controller node to the SoC dtsi.
> 
> The driver is intended to support host-BMC communication over the BMC-side
> eSPI slave controller present on AST2600 systems.

This all seems to be in the wrong places entirely, shouldn't an eSPI
driver and bindings go in the spi subsystem? FSL's appears to be there.
Mark?

> 
> Patch summary:
> 1. dt-bindings: soc: aspeed: Add AST2600 eSPI controller
> 2. soc: aspeed: Introduce core eSPI controller support
> 3. soc: aspeed: Add AST2600 peripheral channel port I/O support
> 4. soc: aspeed: Add eSPI TAFS backend support
> 5. soc: aspeed: Add espi flash channel support
> 6. soc: aspeed: Add sysfs controls for flash LUN selection
> 7. arm: dts: aspeed: Add eSPI node for AST2600
> 
> This series has been tested on AST2600 platform with Intel's host eSPI
> controller.
> 
> Signed-off-by: aspeedyh <yh_chung@aspeedtech.com>

Unless you're an fanatical employee of Aspeed, I doubt that this signoff
reflects your actual name!

> ---
> aspeedyh (7):
>       dt-bindings: soc: aspeed: Add AST2600 eSPI controller
>       soc: aspeed: Introduce core eSPI controller support
>       soc: aspeed: Add AST2600 peripheral channel port I/O support
>       soc: aspeed: Add eSPI TAFS backend support
>       soc: aspeed: Add eSPI flash channel support
>       soc: aspeed: Add sysfs controls for flash backend selection
>       arm: dts: aspeed: Add eSPI node for AST2600
> 
>  .../bindings/soc/aspeed/aspeed,ast2600-espi.yaml   |  74 +++
>  arch/arm/boot/dts/aspeed/aspeed-g6.dtsi            |  11 +
>  drivers/soc/aspeed/Kconfig                         |   7 +
>  drivers/soc/aspeed/Makefile                        |   1 +
>  drivers/soc/aspeed/espi/Makefile                   |   1 +
>  drivers/soc/aspeed/espi/aspeed-espi-comm.h         |  62 +++
>  drivers/soc/aspeed/espi/aspeed-espi.c              | 618 +++++++++++++++++++++
>  drivers/soc/aspeed/espi/aspeed-espi.h              |  63 +++
>  drivers/soc/aspeed/espi/ast2600-espi.c             | 304 ++++++++++
>  drivers/soc/aspeed/espi/ast2600-espi.h             | 302 ++++++++++
>  drivers/soc/aspeed/espi/espi_storage.c             | 322 +++++++++++
>  drivers/soc/aspeed/espi/espi_storage.h             |  32 ++
>  12 files changed, 1797 insertions(+)
> ---
> base-commit: 0257f64bdac7fdca30fa3cae0df8b9ecbec7733a
> change-id: 20260313-upstream_espi-d9fea66d1772
> 
> Best regards,
> -- 
> aspeedyh <yh_chung@aspeedtech.com>
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  parent reply	other threads:[~2026-03-13 16:24 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-13 10:07 [PATCH 0/7] soc: aspeed: Add AST2600 eSPI controller support aspeedyh
2026-03-13 10:07 ` [PATCH 1/7] dt-bindings: soc: aspeed: Add AST2600 eSPI controller aspeedyh
2026-03-16  7:07   ` Krzysztof Kozlowski
2026-03-16  8:17     ` YH Chung
2026-03-16 11:04       ` Conor Dooley
2026-03-17  8:43         ` YH Chung
2026-03-13 10:07 ` [PATCH 2/7] soc: aspeed: Introduce core eSPI controller support aspeedyh
2026-03-16  9:57   ` Philipp Zabel
2026-03-17  8:40     ` YH Chung
2026-03-13 10:07 ` [PATCH 3/7] soc: aspeed: Add AST2600 peripheral channel port I/O support aspeedyh
2026-05-07 14:03   ` Shulzhenko, Oleksandr
2026-03-13 10:07 ` [PATCH 4/7] soc: aspeed: Add eSPI TAFS backend support aspeedyh
2026-03-13 10:07 ` [PATCH 5/7] soc: aspeed: Add eSPI flash channel support aspeedyh
2026-03-19 23:53   ` kernel test robot
2026-03-20  1:17   ` kernel test robot
2026-03-20  4:19   ` kernel test robot
2026-03-13 10:07 ` [PATCH 6/7] soc: aspeed: Add sysfs controls for flash backend selection aspeedyh
2026-03-13 10:07 ` [PATCH 7/7] arm: dts: aspeed: Add eSPI node for AST2600 aspeedyh
2026-03-13 16:24 ` Conor Dooley [this message]
2026-03-13 16:32   ` [PATCH 0/7] soc: aspeed: Add AST2600 eSPI controller support Mark Brown
2026-03-13 16:48     ` Mark Brown
2026-03-16  3:07       ` YH Chung
2026-03-13 21:36   ` Arnd Bergmann
2026-03-14  1:02     ` Mark Brown
2026-03-16  6:06     ` Ivan Mikhaylov
2026-03-16  6:34     ` Andrew Jeffery
2026-03-17  8:14       ` YH Chung
2026-03-17  9:50         ` Arnd Bergmann
2026-03-25  8:41           ` YH Chung
2026-03-25 10:30             ` Arnd Bergmann
2026-03-27  4:14               ` YH Chung
2026-04-07  9:36                 ` YH Chung
2026-05-07 16:00                   ` Shulzhenko, Oleksandr
2026-05-12  7:08                     ` YH Chung
2026-05-12  8:45                       ` Shulzhenko, Oleksandr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260313-energy-casket-ca8adc1f1fd1@spud \
    --to=conor@kernel.org \
    --cc=andrew@codeconstruct.com.au \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.lawniczak@intel.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    --cc=yh_chung@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox