[PATCH v7 0/2] Add support for Variscite DART-MX95 and Sonata board

[Stefano Radaelli <stefano.radaelli21@gmail.com>]

This patch series adds support for the Variscite DART-MX95 system on
module and the Sonata carrier board.

The series includes:
- Device tree bindings documentation for both SOM and carrier board
- SOM device tree with on-module peripherals
- Sonata carrier board device tree with board-specific features

The implementation follows the standard SOM + carrier board pattern
where the SOM dtsi contains only peripherals mounted on the module,
while carrier-specific interfaces are enabled in the board dts.

v7:
- Order nodes in symphony dts
v6:
- Order by node name instead of by label
v5:
- Fix newlines and nodes order
v4:
- Fix typo in spacing
- Remove vpu and cm7 reserved memory
- Add GPIO_OPEN_DRAIN to i2c gpios
- Move pinmux to eof
v3:
- Fix specific node names with generic ones
- Remove fixed-link property for SFP
- Audio regulator cleanup
v2:
- Add SFP cage node for enetc_port2 following sff,sfp.yaml binding

Stefano Radaelli (2):
  arm64: dts: freescale: Add support for Variscite DART-MX95
  arm64: dts: imx95-var-dart: Add support for Variscite Sonata board

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx95-var-dart-sonata.dts   | 591 ++++++++++++++++++
 .../boot/dts/freescale/imx95-var-dart.dtsi    | 425 +++++++++++++
 3 files changed, 1017 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi


base-commit: 40fbbd64bba6c6e7a72885d2f59b6a3be9991eeb
prerequisite-patch-id: 7ed0e453f554c70d0fafd5147d4d9b62cac6c10f
-- 
2.47.3