[PATCH 6/6] ARM: dts: BCM5301X: EA9200: set MAC from nvram

[Rosen Penev <rosenp@gmail.com>]

Especially needed for the WAN port, which is part of the switch and
inherits the MAC from GMAC2. Added extra definitions for the wifi
interfaces to make everything clear.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
index d8aab570dbe8..8037eac1c3b7 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -115,6 +115,8 @@ wifi@0,0 {
 				reg = <0x0000 0 0 0 0>;
 				ieee80211-freq-limit = <5170000 5250000>;
 				brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				nvmem-cells = <&et2macaddr 2>;
+				nvmem-cell-names = "mac-address";
 			};
 		};
 
@@ -129,6 +131,8 @@ wifi@0,0 {
 				compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 				reg = <0x0000 0 0 0 0>;
 				brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				nvmem-cells = <&et2macaddr 3>;
+				nvmem-cell-names = "mac-address";
 			};
 		};
 	};
@@ -140,6 +144,8 @@ wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		ieee80211-freq-limit = <5735000 5835000>;
 		brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+		nvmem-cells = <&et2macaddr 4>;
+		nvmem-cell-names = "mac-address";
 	};
 };
 
@@ -155,6 +161,11 @@ &usb3 {
 	vcc-gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac2 {
+	nvmem-cells = <&et2macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &srab {
 	status = "okay";
 
-- 
2.53.0