[GIT PULL 1/2] Broadcom devicetree changes for 7.1

[Florian Fainelli <florian.fainelli@broadcom.com>]

The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:

  Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-7.1/devicetree

for you to fetch changes up to 220bdfcb4b4788f57faa2c28454d8b2dd3bcab6c:

  ARM: dts: BCM5301X: EA9200: specify partitions (2026-03-20 16:57:31 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:

- Rafal provides a complete description of the PCIe Root Complex nodes
  in order to silence a number of dtc warnings

- Rosen provides the necessary NVMEM properties to allow describing the
  WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
  and Wi-Fi buttons for the Linksys EA9200 router

- Linus completes the BCA devices description by adding the I2C block
  and fixing interrupts for the DMA block on 63138 and 6878

----------------------------------------------------------------
Linus Walleij (7):
      ARM: dts: bcm6878: Fix PL081 DMA block IRQ
      ARM: dts: bcm63138: Fix DMA IRQ
      ARM: dts: bcm6846: Add I2C bus block
      ARM: dts: bcm6855: Add I2C bus blocks
      ARM: dts: bcm6878: Add I2C bus block
      ARM: dts: bcm63138: Add I2C block
      ARM: dts: bcm63148: Add I2C block

Miquel Raynal (1):
      ARM: dts: BCM5301X: Drop extra NAND controller compatible

Rafał Miłecki (1):
      ARM: dts: BCM5301X: Describe PCIe controllers fully

Rob Herring (Arm) (1):
      ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level

Rosen Penev (9):
      ARM: dts: BCM5301X: add root pcie bridges
      ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
      ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
      ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
      ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
      ARM: dts: BCM5301X: EA9200: add WiFi button
      ARM: dts: BCM5301X: EA9200: add USB GPIOs
      ARM: dts: BCM5301X: EA9200: add LEDs
      ARM: dts: BCM5301X: EA9200: specify partitions

 arch/arm/boot/dts/broadcom/bcm-ns.dtsi             |  58 +++++++++++-
 arch/arm/boot/dts/broadcom/bcm2835-common.dtsi     |   7 +-
 arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi        |  16 ++--
 .../boot/dts/broadcom/bcm4709-linksys-ea9200.dts   | 100 +++++++++++++++++++++
 .../boot/dts/broadcom/bcm4709-netgear-r8000.dts    |  73 +++++++--------
 .../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi |   7 ++
 .../boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts  |   3 +
 .../dts/broadcom/bcm47094-linksys-panamera.dts     |   7 ++
 .../boot/dts/broadcom/bcm47094-luxul-xap-1610.dts  |  36 ++------
 .../dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts    |  36 ++------
 arch/arm/boot/dts/broadcom/bcm63138.dtsi           |  11 ++-
 arch/arm/boot/dts/broadcom/bcm63148.dtsi           |  11 ++-
 arch/arm/boot/dts/broadcom/bcm6846.dtsi            |   9 ++
 arch/arm/boot/dts/broadcom/bcm6855.dtsi            |  18 ++++
 arch/arm/boot/dts/broadcom/bcm6878.dtsi            |  11 ++-
 15 files changed, 289 insertions(+), 114 deletions(-)