From: Atharv Dubey <atharvd440@gmail.com>
To: Till Harbaum <till@harbaum.org>,
Andi Shyti <andi.shyti@kernel.org>,
Laxman Dewangan <ldewangan@nvidia.com>,
Dmitry Osipenko <digetx@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>,
Alain Volmat <alain.volmat@foss.st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Orson Zhai <orsonzhai@gmail.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
Jean Delvare <jdelvare@suse.com>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev,
linux-stm32@st-md-mailman.stormreply.com,
Enrico Zanda <e.zanda1@gmail.com>,
Atharv Dubey <atharvd440@gmail.com>
Subject: [PATCH 04/10] i2c: stm32f7: Replace dev_err() with dev_err_probe() in probe function
Date: Tue, 24 Mar 2026 23:56:52 +0530 [thread overview]
Message-ID: <20260324-deverr-v1-4-7e591cce33a3@gmail.com> (raw)
In-Reply-To: <20260324-deverr-v1-0-7e591cce33a3@gmail.com>
From: Enrico Zanda <e.zanda1@gmail.com>
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
---
drivers/i2c/busses/i2c-stm32f7.c | 78 ++++++++++++++++------------------------
1 file changed, 30 insertions(+), 48 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 70cb5822bf17..e7cc7f0fb56c 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -481,28 +481,22 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
int ret = 0;
specs = stm32f7_get_specs(setup->speed_freq);
- if (specs == ERR_PTR(-EINVAL)) {
- dev_err(i2c_dev->dev, "speed out of bound {%d}\n",
- setup->speed_freq);
- return -EINVAL;
- }
+ if (specs == ERR_PTR(-EINVAL))
+ return dev_err_probe(i2c_dev->dev, -EINVAL, "speed out of bound {%d}\n",
+ setup->speed_freq);
if ((setup->rise_time > specs->rise_max) ||
- (setup->fall_time > specs->fall_max)) {
- dev_err(i2c_dev->dev,
- "timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
- setup->rise_time, specs->rise_max,
- setup->fall_time, specs->fall_max);
- return -EINVAL;
- }
+ (setup->fall_time > specs->fall_max))
+ return dev_err_probe(i2c_dev->dev, -EINVAL,
+ "timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
+ setup->rise_time, specs->rise_max,
+ setup->fall_time, specs->fall_max);
i2c_dev->dnf = DIV_ROUND_CLOSEST(i2c_dev->dnf_dt, i2cclk);
- if (i2c_dev->dnf > STM32F7_I2C_DNF_MAX) {
- dev_err(i2c_dev->dev,
- "DNF out of bound %d/%d\n",
- i2c_dev->dnf * i2cclk, STM32F7_I2C_DNF_MAX * i2cclk);
- return -EINVAL;
- }
+ if (i2c_dev->dnf > STM32F7_I2C_DNF_MAX)
+ return dev_err_probe(i2c_dev->dev, -EINVAL,
+ "DNF out of bound %d/%d\n", i2c_dev->dnf * i2cclk,
+ STM32F7_I2C_DNF_MAX * i2cclk);
/* Analog and Digital Filters */
af_delay_min =
@@ -567,8 +561,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
}
if (list_empty(&solutions)) {
- dev_err(i2c_dev->dev, "no Prescaler solution\n");
- ret = -EPERM;
+ ret = dev_err_probe(i2c_dev->dev, -EPERM, "no Prescaler solution\n");
goto exit;
}
@@ -624,8 +617,7 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
}
if (!s) {
- dev_err(i2c_dev->dev, "no solution at all\n");
- ret = -EPERM;
+ ret = dev_err_probe(i2c_dev->dev, -EPERM, "no solution at all\n");
goto exit;
}
@@ -674,11 +666,9 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
i2c_parse_fw_timings(i2c_dev->dev, t, false);
- if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) {
- dev_err(i2c_dev->dev, "Invalid bus speed (%i>%i)\n",
- t->bus_freq_hz, I2C_MAX_FAST_MODE_PLUS_FREQ);
- return -EINVAL;
- }
+ if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
+ return dev_err_probe(i2c_dev->dev, -EINVAL, "Invalid bus speed (%i>%i)\n",
+ t->bus_freq_hz, I2C_MAX_FAST_MODE_PLUS_FREQ);
setup->speed_freq = t->bus_freq_hz;
i2c_dev->setup.rise_time = t->scl_rise_ns;
@@ -686,10 +676,8 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
i2c_dev->dnf_dt = t->digital_filter_width_ns;
setup->clock_src = clk_get_rate(i2c_dev->clk);
- if (!setup->clock_src) {
- dev_err(i2c_dev->dev, "clock rate is 0\n");
- return -EINVAL;
- }
+ if (!setup->clock_src)
+ return dev_err_probe(i2c_dev->dev, -EINVAL, "clock rate is 0\n");
if (!of_property_read_bool(i2c_dev->dev->of_node, "i2c-digital-filter"))
i2c_dev->dnf_dt = STM32F7_I2C_DNF_DEFAULT;
@@ -698,8 +686,8 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
ret = stm32f7_i2c_compute_timing(i2c_dev, setup,
&i2c_dev->timing);
if (ret) {
- dev_err(i2c_dev->dev,
- "failed to compute I2C timings.\n");
+ dev_err_probe(i2c_dev->dev, ret,
+ "failed to compute I2C timings.\n");
if (setup->speed_freq <= I2C_MAX_STANDARD_MODE_FREQ)
break;
setup->speed_freq =
@@ -710,10 +698,8 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
}
} while (ret);
- if (ret) {
- dev_err(i2c_dev->dev, "Impossible to compute I2C timings.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(i2c_dev->dev, ret, "Impossible to compute I2C timings.\n");
i2c_dev->analog_filter = of_property_read_bool(i2c_dev->dev->of_node,
"i2c-analog-filter");
@@ -2175,10 +2161,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
return -ENOMEM;
setup = of_device_get_match_data(&pdev->dev);
- if (!setup) {
- dev_err(&pdev->dev, "Can't get device data\n");
- return -ENODEV;
- }
+ if (!setup)
+ return dev_err_probe(&pdev->dev, -ENODEV, "Can't get device data\n");
i2c_dev->setup = *setup;
i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
@@ -2279,7 +2263,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
ret = dev_pm_set_wake_irq(i2c_dev->dev, irq_event);
if (ret) {
- dev_err(i2c_dev->dev, "Failed to set wake up irq\n");
+ dev_err_probe(i2c_dev->dev, ret, "Failed to set wake up irq\n");
goto clr_wakeup_capable;
}
}
@@ -2305,9 +2289,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
if (i2c_dev->smbus_mode) {
ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
if (ret) {
- dev_err(i2c_dev->dev,
- "failed to enable SMBus Host-Notify protocol (%d)\n",
- ret);
+ dev_err_probe(i2c_dev->dev, ret,
+ "failed to enable SMBus Host-Notify protocol\n");
goto i2c_adapter_remove;
}
}
@@ -2315,9 +2298,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
if (of_property_read_bool(pdev->dev.of_node, "smbus-alert")) {
ret = stm32f7_i2c_enable_smbus_alert(i2c_dev);
if (ret) {
- dev_err(i2c_dev->dev,
- "failed to enable SMBus alert protocol (%d)\n",
- ret);
+ dev_err_probe(i2c_dev->dev, ret,
+ "failed to enable SMBus alert protocol\n");
goto i2c_disable_smbus_host;
}
}
--
2.43.0
next prev parent reply other threads:[~2026-03-24 18:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 18:26 [PATCH 00/10] i2c: Replace dev_err() with dev_err_probe() Atharv Dubey
2026-03-24 18:26 ` [PATCH 01/10] i2c: tiny-usb: Replace dev_err() with dev_err_probe() in probe function Atharv Dubey
2026-03-24 18:26 ` [PATCH 02/10] i2c: tegra: " Atharv Dubey
2026-03-24 21:04 ` Jon Hunter
2026-03-24 18:26 ` [PATCH 03/10] i2c: sun6i-p2wi: " Atharv Dubey
2026-03-25 16:01 ` Chen-Yu Tsai
2026-03-24 18:26 ` Atharv Dubey [this message]
2026-03-24 18:26 ` [PATCH 05/10] i2c: stm32f4: " Atharv Dubey
2026-03-24 18:26 ` [PATCH 06/10] i2c: stm32: " Atharv Dubey
2026-03-24 18:26 ` [PATCH 07/10] i2c: st: " Atharv Dubey
2026-03-24 18:26 ` [PATCH 08/10] i2c: sprd: " Atharv Dubey
2026-03-24 18:26 ` [PATCH 09/10] i2c: sis96x: " Atharv Dubey
2026-03-24 18:26 ` [PATCH 10/10] i2c: sis630: " Atharv Dubey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324-deverr-v1-4-7e591cce33a3@gmail.com \
--to=atharvd440@gmail.com \
--cc=alain.volmat@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andi.shyti@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=digetx@gmail.com \
--cc=e.zanda1@gmail.com \
--cc=jdelvare@suse.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-tegra@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=orsonzhai@gmail.com \
--cc=patrice.chotard@foss.st.com \
--cc=pierre-yves.mordret@foss.st.com \
--cc=samuel@sholland.org \
--cc=thierry.reding@gmail.com \
--cc=till@harbaum.org \
--cc=wens@kernel.org \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox