[PATCH] arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to vqmmc

[Judith Mendez <jm@ti.com>]

Add bootph-all property to vqmmc voltage regulator node and its
corresponding pinmux node to make it available during all boot
phases. This allows to run tuning early in SPL stages of boot.

Fixes: 8f023012eb4a ("arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index b1a6f10adf26..a085613cf123 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -154,6 +154,7 @@ vddshv_sdio: regulator-5 {
 		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
+		bootph-all;
 	};
 
 	leds {
@@ -400,6 +401,7 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (N22) GPMC0_CLK.GPIO0_31 */
 		>;
+		bootph-all;
 	};
 
 	main_ecap0_pins_default: main-ecap0-default-pins {
-- 
2.53.0