From: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
To: "Nipun Gupta" <nipun.gupta@amd.com>,
"Nikhil Agarwal" <nikhil.agarwal@amd.com>,
"Joerg Roedel" <joro@8bytes.org>, "Will Deacon" <will@kernel.org>,
"Robin Murphy" <robin.murphy@arm.com>,
"Marc Zyngier" <maz@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Thomas Gleixner" <tglx@kernel.org>,
"Saravana Kannan" <saravanak@kernel.org>,
"Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Frank Li" <Frank.Li@nxp.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Juergen Gross" <jgross@suse.com>,
"Stefano Stabellini" <sstabellini@kernel.org>,
"Oleksandr Tyshchenko" <oleksandr_tyshchenko@epam.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@oss.qualcomm.com>,
"Konrad Dybcio" <konrad.dybcio@oss.qualcomm.com>,
"Bjorn Andersson" <bjorn.andersson@oss.qualcomm.com>,
"Rob Herring" <robh@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Prakash Gupta" <prakash.gupta@oss.qualcomm.com>,
"Vikash Garodia" <vikash.garodia@oss.qualcomm.com>
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux.dev,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, imx@lists.linux.dev,
xen-devel@lists.xenproject.org, linux-arm-msm@vger.kernel.org,
Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>,
Charan Teja Kalla <charan.kalla@oss.qualcomm.com>
Subject: [PATCH v12 3/3] of: Respect #{iommu,msi}-cells in maps
Date: Tue, 31 Mar 2026 19:34:48 +0530 [thread overview]
Message-ID: <20260331-parse_iommu_cells-v12-3-decfd305eea9@oss.qualcomm.com> (raw)
In-Reply-To: <20260331-parse_iommu_cells-v12-0-decfd305eea9@oss.qualcomm.com>
From: Robin Murphy <robin.murphy@arm.com>
So far our parsing of {iommu,msi}-map properties has always blindly
assumed that the output specifiers will always have exactly 1 cell.
This typically does happen to be the case, but is not actually enforced
(and the PCI msi-map binding even explicitly states support for 0 or 1
cells) - as a result we've now ended up with dodgy DTs out in the field
which depend on this behaviour to map a 1-cell specifier for a 2-cell
provider, despite that being bogus per the bindings themselves.
Since there is some potential use in being able to map at least single
input IDs to multi-cell output specifiers (and properly support 0-cell
outputs as well), add support for properly parsing and using the target
nodes' #cells values, albeit with the unfortunate complication of still
having to work around expectations of the old behaviour too.
Since there are multi-cell output specifiers, the callers of of_map_id()
may need to get the exact cell output value for further processing.
Update of_map_id() to set args_count in the output to reflect the actual
number of output specifier cells.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Charan Teja Kalla <charan.kalla@oss.qualcomm.com>
Signed-off-by: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
---
drivers/of/base.c | 155 ++++++++++++++++++++++++++++++++++++++++-------------
include/linux/of.h | 6 ++-
2 files changed, 123 insertions(+), 38 deletions(-)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index b3d002015192..7b22e2484e1c 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2096,18 +2096,48 @@ int of_find_last_cache_level(unsigned int cpu)
return cache_level;
}
+/*
+ * Some DTs have an iommu-map targeting a 2-cell IOMMU node while
+ * specifying only 1 cell. Fortunately they all consist of value '1'
+ * as the 2nd cell entry with the same target, so check for that pattern.
+ *
+ * Example:
+ * IOMMU node:
+ * #iommu-cells = <2>;
+ *
+ * Device node:
+ * iommu-map = <0x0000 &smmu 0x0000 0x1>,
+ * <0x0100 &smmu 0x0100 0x1>;
+ */
+static bool of_check_bad_map(const __be32 *map, int len)
+{
+ __be32 phandle = map[1];
+
+ if (len % 4)
+ return false;
+ for (int i = 0; i < len; i += 4) {
+ if (map[i + 1] != phandle || map[i + 3] != cpu_to_be32(1))
+ return false;
+ }
+ return true;
+}
+
/**
* of_map_id - Translate an ID through a downstream mapping.
* @np: root complex device node.
* @id: device ID to map.
* @map_name: property name of the map to use.
+ * @cells_name: property name of target specifier cells.
* @map_mask_name: optional property name of the mask to use.
* @filter_np: optional device node to filter matches by, or NULL to match any.
* If non-NULL, only map entries targeting this node will be matched.
* @arg: pointer to a &struct of_phandle_args for the result. On success,
- * @arg->args[0] will contain the translated ID. If a map entry was
- * matched, @arg->np will be set to the target node with a reference
- * held that the caller must release with of_node_put().
+ * @arg->args_count will be set to the number of output specifier cells
+ * as defined by @cells_name in the target node, and
+ * @arg->args[0..args_count-1] will contain the translated output
+ * specifier values. If a map entry was matched, @arg->np will be set
+ * to the target node with a reference held that the caller must release
+ * with of_node_put().
*
* Given a device ID, look up the appropriate implementation-defined
* platform ID and/or the target device which receives transactions on that
@@ -2116,17 +2146,19 @@ int of_find_last_cache_level(unsigned int cpu)
* Return: 0 on success or a standard error code on failure.
*/
int of_map_id(const struct device_node *np, u32 id,
- const char *map_name, const char *map_mask_name,
+ const char *map_name, const char *cells_name,
+ const char *map_mask_name,
const struct device_node *filter_np, struct of_phandle_args *arg)
{
u32 map_mask, masked_id;
- int map_len;
+ int map_bytes, map_len, offset = 0;
+ bool bad_map = false;
const __be32 *map = NULL;
if (!np || !map_name || !arg)
return -EINVAL;
- map = of_get_property(np, map_name, &map_len);
+ map = of_get_property(np, map_name, &map_bytes);
if (!map) {
if (filter_np)
return -ENODEV;
@@ -2136,11 +2168,9 @@ int of_map_id(const struct device_node *np, u32 id,
return 0;
}
- if (!map_len || map_len % (4 * sizeof(*map))) {
- pr_err("%pOF: Error: Bad %s length: %d\n", np,
- map_name, map_len);
- return -EINVAL;
- }
+ if (map_bytes % sizeof(*map))
+ goto err_map_len;
+ map_len = map_bytes / sizeof(*map);
/* The default is to select all bits. */
map_mask = 0xffffffff;
@@ -2153,39 +2183,82 @@ int of_map_id(const struct device_node *np, u32 id,
of_property_read_u32(np, map_mask_name, &map_mask);
masked_id = map_mask & id;
- for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
+
+ while (offset < map_len) {
struct device_node *phandle_node;
- u32 id_base = be32_to_cpup(map + 0);
- u32 phandle = be32_to_cpup(map + 1);
- u32 out_base = be32_to_cpup(map + 2);
- u32 id_len = be32_to_cpup(map + 3);
+ u32 id_base, phandle, id_len, id_off, cells = 0;
+ const __be32 *out_base;
+
+ if (map_len - offset < 2)
+ goto err_map_len;
+
+ id_base = be32_to_cpup(map + offset);
if (id_base & ~map_mask) {
- pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores id-base (0x%x)\n",
- np, map_name, map_name,
- map_mask, id_base);
+ pr_err("%pOF: Invalid %s translation - %s (0x%x) ignores id-base (0x%x)\n",
+ np, map_name, map_mask_name, map_mask, id_base);
return -EFAULT;
}
- if (masked_id < id_base || masked_id >= id_base + id_len)
- continue;
-
+ phandle = be32_to_cpup(map + offset + 1);
phandle_node = of_find_node_by_phandle(phandle);
if (!phandle_node)
return -ENODEV;
+ if (!bad_map && of_property_read_u32(phandle_node, cells_name, &cells)) {
+ pr_err("%pOF: missing %s property\n", phandle_node, cells_name);
+ of_node_put(phandle_node);
+ return -EINVAL;
+ }
+
+ if (map_len - offset < 3 + cells) {
+ of_node_put(phandle_node);
+ goto err_map_len;
+ }
+
+ if (offset == 0 && cells == 2) {
+ bad_map = of_check_bad_map(map, map_len);
+ if (bad_map) {
+ pr_warn_once("%pOF: %s mismatches target %s, assuming extra cell of 0\n",
+ np, map_name, cells_name);
+ cells = 1;
+ }
+ }
+
+ out_base = map + offset + 2;
+ offset += 3 + cells;
+
+ id_len = be32_to_cpup(map + offset - 1);
+ if (id_len > 1 && cells > 1) {
+ /*
+ * With 1 output cell we reasonably assume its value
+ * has a linear relationship to the input; with more,
+ * we'd need help from the provider to know what to do.
+ */
+ pr_err("%pOF: Unsupported %s - cannot handle %d-ID range with %d-cell output specifier\n",
+ np, map_name, id_len, cells);
+ of_node_put(phandle_node);
+ return -EINVAL;
+ }
+ id_off = masked_id - id_base;
+ if (masked_id < id_base || id_off >= id_len) {
+ of_node_put(phandle_node);
+ continue;
+ }
+
if (filter_np && filter_np != phandle_node) {
of_node_put(phandle_node);
continue;
}
arg->np = phandle_node;
- arg->args[0] = masked_id - id_base + out_base;
- arg->args_count = 1;
+ for (int i = 0; i < cells; i++)
+ arg->args[i] = id_off + be32_to_cpu(out_base[i]);
+ arg->args_count = cells;
pr_debug("%pOF: %s, using mask %08x, id-base: %08x, out-base: %08x, length: %08x, id: %08x -> %08x\n",
- np, map_name, map_mask, id_base, out_base,
- id_len, id, masked_id - id_base + out_base);
+ np, map_name, map_mask, id_base, be32_to_cpup(out_base),
+ id_len, id, id_off + be32_to_cpup(out_base));
return 0;
}
@@ -2196,6 +2269,10 @@ int of_map_id(const struct device_node *np, u32 id,
arg->args[0] = id;
arg->args_count = 1;
return 0;
+
+err_map_len:
+ pr_err("%pOF: Error: Bad %s length: %d\n", np, map_name, map_bytes);
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(of_map_id);
@@ -2205,18 +2282,21 @@ EXPORT_SYMBOL_GPL(of_map_id);
* @id: Requester ID of the device (e.g. PCI RID/BDF or a platform
* stream/device ID) used as the lookup key in the iommu-map table.
* @arg: pointer to a &struct of_phandle_args for the result. On success,
- * @arg->args[0] contains the translated ID. If a map entry was matched,
- * @arg->np holds a reference to the target node that the caller must
- * release with of_node_put().
+ * @arg->args_count will be set to the number of output specifier cells
+ * and @arg->args[0..args_count-1] will contain the translated output
+ * specifier values. If a map entry was matched, @arg->np holds a
+ * reference to the target node that the caller must release with
+ * of_node_put().
*
- * Convenience wrapper around of_map_id() using "iommu-map" and "iommu-map-mask".
+ * Convenience wrapper around of_map_id() using "iommu-map", "#iommu-cells",
+ * and "iommu-map-mask".
*
* Return: 0 on success or a standard error code on failure.
*/
int of_map_iommu_id(const struct device_node *np, u32 id,
struct of_phandle_args *arg)
{
- return of_map_id(np, id, "iommu-map", "iommu-map-mask", NULL, arg);
+ return of_map_id(np, id, "iommu-map", "#iommu-cells", "iommu-map-mask", NULL, arg);
}
EXPORT_SYMBOL_GPL(of_map_iommu_id);
@@ -2229,17 +2309,20 @@ EXPORT_SYMBOL_GPL(of_map_iommu_id);
* to match any. If non-NULL, only map entries targeting this node will
* be matched.
* @arg: pointer to a &struct of_phandle_args for the result. On success,
- * @arg->args[0] contains the translated ID. If a map entry was matched,
- * @arg->np holds a reference to the target node that the caller must
- * release with of_node_put().
+ * @arg->args_count will be set to the number of output specifier cells
+ * and @arg->args[0..args_count-1] will contain the translated output
+ * specifier values. If a map entry was matched, @arg->np holds a
+ * reference to the target node that the caller must release with
+ * of_node_put().
*
- * Convenience wrapper around of_map_id() using "msi-map" and "msi-map-mask".
+ * Convenience wrapper around of_map_id() using "msi-map", "#msi-cells",
+ * and "msi-map-mask".
*
* Return: 0 on success or a standard error code on failure.
*/
int of_map_msi_id(const struct device_node *np, u32 id,
const struct device_node *filter_np, struct of_phandle_args *arg)
{
- return of_map_id(np, id, "msi-map", "msi-map-mask", filter_np, arg);
+ return of_map_id(np, id, "msi-map", "#msi-cells", "msi-map-mask", filter_np, arg);
}
EXPORT_SYMBOL_GPL(of_map_msi_id);
diff --git a/include/linux/of.h b/include/linux/of.h
index 8548cd9eb4f1..51ac8539f2c3 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -462,7 +462,8 @@ const char *of_prop_next_string(const struct property *prop, const char *cur);
bool of_console_check(const struct device_node *dn, char *name, int index);
int of_map_id(const struct device_node *np, u32 id,
- const char *map_name, const char *map_mask_name,
+ const char *map_name, const char *cells_name,
+ const char *map_mask_name,
const struct device_node *filter_np, struct of_phandle_args *arg);
int of_map_iommu_id(const struct device_node *np, u32 id,
@@ -934,7 +935,8 @@ static inline void of_property_clear_flag(struct property *p, unsigned long flag
}
static inline int of_map_id(const struct device_node *np, u32 id,
- const char *map_name, const char *map_mask_name,
+ const char *map_name, const char *cells_name,
+ const char *map_mask_name,
const struct device_node *filter_np,
struct of_phandle_args *arg)
{
--
2.34.1
prev parent reply other threads:[~2026-03-31 14:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-31 14:04 [PATCH v12 0/3] of: parsing of multi #{iommu,msi}-cells in maps Vijayanand Jitta
2026-03-31 14:04 ` [PATCH v12 1/3] of: Add convenience wrappers for of_map_id() Vijayanand Jitta
2026-03-31 14:04 ` [PATCH v12 2/3] of: Factor arguments passed to of_map_id() into a struct Vijayanand Jitta
2026-03-31 14:43 ` Frank Li
2026-04-01 16:01 ` Krzysztof Kozlowski
2026-03-31 14:04 ` Vijayanand Jitta [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260331-parse_iommu_cells-v12-3-decfd305eea9@oss.qualcomm.com \
--to=vijayanand.jitta@oss.qualcomm.com \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=charan.kalla@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=iommu@lists.linux.dev \
--cc=jgross@suse.com \
--cc=joro@8bytes.org \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=maz@kernel.org \
--cc=nikhil.agarwal@amd.com \
--cc=nipun.gupta@amd.com \
--cc=oleksandr_tyshchenko@epam.com \
--cc=prakash.gupta@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=s.hauer@pengutronix.de \
--cc=saravanak@kernel.org \
--cc=sstabellini@kernel.org \
--cc=tglx@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
--cc=will@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox