From: Robby Cai <robby.cai@nxp.com>
To: p.zabel@pengutronix.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, Frank.Li@nxp.com, s.hauer@pengutronix.de,
festevam@gmail.com
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, aisheng.dong@nxp.com
Subject: [PATCH 1/2] dt-bindings: reset: imx8mq: Add _N suffix to IMX8MQ_RESET_MIPI_CSI*_RESET
Date: Tue, 31 Mar 2026 18:13:30 +0800 [thread overview]
Message-ID: <20260331101331.1405588-2-robby.cai@nxp.com> (raw)
In-Reply-To: <20260331101331.1405588-1-robby.cai@nxp.com>
The assert logic of the MIPI CSI reset signals is active-low on i.MX8MQ,
but the existing names do not indicate this explicitly. To improve
consistency and clarity, append the _N suffix to all
IMX8MQ_RESET_MIPI_CSI*_RESET definitions. The deprecated
IMX8MQ_RESET_MIPI_CSI*_RESET versions remain temporarily for DT ABI
compatibility and will be removed at an appropriate time in the future.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
---
include/dt-bindings/reset/imx8mq-reset.h | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 705870693ec2..83a155dbbd4a 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -46,12 +46,18 @@
#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM/i.MX8MN does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET_N 38 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET_N 39 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET_N 40 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET_N 41 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET_N 42 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* Deprecated. Use *_RESET_N instead */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET_N 43 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_DDRC1_PRST 44 /* i.MX8MN does NOT support */
#define IMX8MQ_RESET_DDRC1_CORE_RESET 45 /* i.MX8MN does NOT support */
#define IMX8MQ_RESET_DDRC1_PHY_RESET 46 /* i.MX8MN does NOT support */
--
2.37.1
next prev parent reply other threads:[~2026-03-31 10:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-31 10:13 [PATCH 0/2] Fix active-low handling of MIPI CSI resets on i.MX8MQ Robby Cai
2026-03-31 10:13 ` Robby Cai [this message]
2026-03-31 12:45 ` [PATCH 1/2] dt-bindings: reset: imx8mq: Add _N suffix to IMX8MQ_RESET_MIPI_CSI*_RESET Philipp Zabel
2026-04-01 7:41 ` Krzysztof Kozlowski
2026-03-31 10:13 ` [PATCH 2/2] reset: imx7: Fix handling of MIPI CSI resets on i.MX8MQ Robby Cai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260331101331.1405588-2-robby.cai@nxp.com \
--to=robby.cai@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox