From: dennis@ausil.us
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: FUKAUMI Naoki <naoki@radxa.com>, Hsun Lai <i@chainsx.cn>,
Jonas Karlman <jonas@kwiboo.se>,
Chaoyi Chen <chaoyi.chen@rock-chips.com>,
John Clark <inindev@gmail.com>,
Michael Opdenacker <michael.opdenacker@rootcommit.com>,
Quentin Schulz <quentin.schulz@cherry.de>,
Andrew Lunn <andrew@lunn.ch>, Chukun Pan <amadeus@jmu.edu.cn>,
Alexey Charkov <alchark@gmail.com>,
Peter Robinson <pbrobinson@gmail.com>,
Dennis Gilmore <dennis@ausil.us>,
Michael Riesch <michael.riesch@collabora.com>,
Mykola Kvach <xakep.amatop@gmail.com>,
Jimmy Hon <honyuenkwun@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 0/3] Add support for Orange Pi 5 Pro
Date: Tue, 31 Mar 2026 20:07:04 -0500 [thread overview]
Message-ID: <20260401010707.2584962-1-dennis@ausil.us> (raw)
From: Dennis Gilmore <dennis@ausil.us>
This series adds initial support for Orange Pi 5 Pro. The network
driver was just added. The only thing missing is the second HDMI port
that is connected via a DP to HDMI adaptor
The series was tested against Linux 7.0-rc2
Please take a look.
Thank you,
Dennis Gilmore
Changes in v5:
- define a connector node for Type-A port, and list the regulator as its VBUS supply explicitly.
- Requires https://lore.kernel.org/all/20260217-typea-vbus-v1-1-657b4e55a4c2@flipper.net/
- link to v4 https://lore.kernel.org/linux-devicetree/20260310031002.3921234-1-dennis@ausil.us/
Changes in v4:
- rename vcc3v3_pcie20 copied from rk3588s-orangepi-5.dts to vcc3v3_phy1 to match the schematic
- use vcc_3v3_s3 as the supply not vcc5v0_sys for PCIe
- remove the definition for vcc3v3_pcie_m2 as it does not really exist
as a regulator
- link to v3 https://lore.kernel.org/linux-devicetree/20260306024634.239614-1-dennis@ausil.us/
Changes in v3:
- moved leds from gpio-leds to pwm-leds
- remove disable-wp from sdio
- rename vcc3v3_pcie_eth regulator to vcc3v3_pcie_m2 to reflect the
purppose
- actually clean up the delete lines and comments missed in v2
- link to v2 https://lore.kernel.org/linux-devicetree/20260304025521.210377-1-dennis@ausil.us/
Changes in v2:
- moved items not shared by orangepi 5/5b/5 Pro from dtsi to 5 and 5b
dts files
- removed all the comments and deleted properties from 5 Pro dts
- Link to v1 https://lore.kernel.org/linux-devicetree/20260228205418.2944620-1-dennis@ausil.us/
Dennis Gilmore (3):
dt-bindings: arm: rockchip: Add Orange Pi 5 Pro
arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for
Pro
arm64: dts: rockchip: Add Orange Pi 5 Pro board support
.../devicetree/bindings/arm/rockchip.yaml | 1 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3588s-orangepi-5-pro.dts | 320 ++++++++++++++++++
.../boot/dts/rockchip/rk3588s-orangepi-5.dts | 184 ++++++++++
.../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 202 +----------
.../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 181 ++++++++++
6 files changed, 700 insertions(+), 189 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
--
2.53.0
next reply other threads:[~2026-04-01 1:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-01 1:07 dennis [this message]
2026-04-01 1:07 ` [PATCH v5 1/3] dt-bindings: arm: rockchip: Add Orange Pi 5 Pro dennis
2026-04-01 1:07 ` [PATCH v5 2/3] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro dennis
2026-04-01 11:52 ` Andrew Lunn
2026-04-01 13:27 ` Dennis Gilmore
2026-04-03 0:53 ` Andrew Lunn
2026-04-01 14:05 ` Jonas Karlman
2026-04-01 1:07 ` [PATCH v5 3/3] arm64: dts: rockchip: Add Orange Pi 5 Pro board support dennis
2026-04-01 9:51 ` Alexey Charkov
2026-04-01 11:56 ` Andrew Lunn
2026-04-01 13:29 ` Dennis Gilmore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260401010707.2584962-1-dennis@ausil.us \
--to=dennis@ausil.us \
--cc=alchark@gmail.com \
--cc=amadeus@jmu.edu.cn \
--cc=andrew@lunn.ch \
--cc=chaoyi.chen@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=honyuenkwun@gmail.com \
--cc=i@chainsx.cn \
--cc=inindev@gmail.com \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.opdenacker@rootcommit.com \
--cc=michael.riesch@collabora.com \
--cc=naoki@radxa.com \
--cc=pbrobinson@gmail.com \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
--cc=xakep.amatop@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox