Re: [PATCH v5 3/3] arm64: dts: rockchip: Add Orange Pi 5 Pro board support

Alexey Charkov
2026-04-01T09:51:28Z

On Wed, Apr 1, 2026 at 5:07 AM <dennis@ausil.us> wrote:
>
> From: Dennis Gilmore <dennis@ausil.us>
>
> Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
>
> - eMMC module, you can optionally solder a SPI NOR in place and turn
> off the eMMC
> - PCIe-attached NIC (pcie2x1l1)
> - PCIe NVMe slot (pcie2x1l2)
> - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> - BCM4345C5 Bluetooth
> - es8388 audio
> - USB 2.0 and USB 3.0
>
> Vendors description and links to schematics available:
> http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 320 ++++++++++++++++++
> 2 files changed, 321 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4d384f153c13..c99dca2ae9e7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> new file mode 100644
> index 000000000000..7ab68245d2c6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> @@ -0,0 +1,320 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> + model = "Xunlong Orange Pi 5 Pro";
> + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> +
> + aliases {
> + mmc0 = &sdhci;
> + mmc1 = &sdmmc;
> + mmc2 = &sdio;
> + };
> +
> + analog-sound {
> + compatible = "simple-audio-card";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_detect>;
> + simple-audio-card,bitclock-master = <&masterdai>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&masterdai>;
> + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> + simple-audio-card,mclk-fs = <256>;
> + simple-audio-card,name = "rockchip,es8388";
> + simple-audio-card,routing =
> + "Headphones", "LOUT1",
> + "Headphones", "ROUT1",
> + "LINPUT1", "Microphone Jack",
> + "RINPUT1", "Microphone Jack",
> + "LINPUT2", "Onboard Microphone",
> + "RINPUT2", "Onboard Microphone";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Microphone", "Onboard Microphone",
> + "Headphone", "Headphones";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s2_2ch>;
> + };
> +
> + masterdai: simple-audio-card,codec {
> + sound-dai = <&es8388>;
> + system-clock-frequency = <12288000>;
> + };
> + };
> +
> + pwm-leds {
> + compatible = "pwm-leds";
> +
> + led-0 {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_STATUS;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm15 0 1000000 0>;
> + };
> +
> + led-1 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_ACTIVITY;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm3 0 1000000 0>;
> + };
> + };
> +
> + fan: pwm-fan {
> + compatible = "pwm-fan";
> + #cooling-cells = <2>;
> + cooling-levels = <0 50 100 150 200 255>;
> + fan-supply = <&vcc5v0_sys>;
> + pwms = <&pwm2 0 20000000 0>;
> + };
> +
> + vcc3v3_phy1: regulator-vcc3v3-phy1 {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_phy1";
> + startup-delay-us = <50000>;
> + vin-supply = <&vcc_3v3_s3>;
> + };
> +
> + vcc5v0_otg: regulator-vcc5v0-otg {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_otg_en>;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <5000000>;
> + regulator-name = "vcc5v0_otg";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&hym8563>;
> + clock-names = "ext_clock";
> + post-power-on-delay-ms = <200>;
> + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> + };
> +
> + typea_con: usb-a-connector {
> + compatible = "usb-a-connector";
> + data-role = "host";
> + label = "USB3 Type-A";
> + power-role = "source";
> + vbus-supply = <&vcc5v0_otg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + typea_con_hs: endpoint {
> + };
> + };

Hi Dennis,

You don't have to define ports if you aren't using them - i.e. here
the endpoints are not linked up to their remote counterparts, so they
don't do anything. If it works for you this way that probably means
you can drop the whole ports subnode altogether and add it later if a
need arises.

> + port@1 {
> + reg = <1>;
> + typea_con_ss: endpoint {
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1m4_xfer>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3m0_xfer>;
> + status = "okay";
> +
> + es8388: audio-codec@11 {
> + compatible = "everest,es8388", "everest,es8328";
> + reg = <0x11>;
> + #sound-dai-cells = <0>;
> + AVDD-supply = <&vcc_3v3_s0>;
> + DVDD-supply = <&vcc_1v8_s0>;
> + HPVDD-supply = <&vcc_3v3_s0>;
> + PVDD-supply = <&vcc_3v3_s0>;
> + assigned-clock-rates = <12288000>;
> + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> + clocks = <&cru I2S2_2CH_MCLKOUT>;

Your codec is the clock master, so it would be better for it to
request the pin config for the mclk pin, as it's the real user of the
master clock (not the i2s2 node). See also below

> + };
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4m3_xfer>;
> + status = "okay";
> +};
> +
> +&i2s2_2ch {
> + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk

Looks like &i2s2m1_mclk belongs in &es8388 instead, not here.

> + &i2s2m1_sdi &i2s2m1_sdo>;
> + status = "okay";
> +};
> +
> +&package_thermal {
> + polling-delay = <1000>;
> +
> + cooling-maps {
> + map0 {
> + trip = <&package_fan0>;
> + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> + };
> +
> + map1 {
> + trip = <&package_fan1>;
> + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> + };
> + };
> +
> + trips {
> + package_fan0: package-fan0 {
> + hysteresis = <2000>;
> + temperature = <55000>;
> + type = "active";
> + };
> +
> + package_fan1: package-fan1 {
> + hysteresis = <2000>;
> + temperature = <65000>;
> + type = "active";
> + };
> + };
> +};
> +
> +/* NVMe */
> +&pcie2x1l1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> + supports-clkreq;
> + vpcie3v3-supply = <&vcc_3v3_s3>;
> + status = "okay";
> +};
> +
> +/* NIC */
> +&pcie2x1l2 {
> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_phy1>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + bluetooth {
> + bt_wake_gpio: bt-wake-pin {
> + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_host_irq: bt-wake-host-irq {
> + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + usb {
> + vcc5v0_otg_en: vcc5v0-otg-en {
> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wlan {
> + wifi_host_wake_irq: wifi-host-wake-irq {
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +};
> +
> +&pwm15 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm15m2_pins>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm2m1_pins>;
> + status = "okay";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm3m2_pins>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + status = "okay";
> +};
> +
> +&sdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + max-frequency = <150000000>;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + no-mmc;
> + no-sd;
> + non-removable;
> + sd-uhs-sdr104;
> + status = "okay";
> +
> + ap6256: wifi@1 {
> + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
> + reg = <1>;
> + interrupt-names = "host-wake";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_host_wake_irq>;
> + };
> +};
> +
> +&uart9 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm4345c5";
> + clocks = <&hym8563>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> + interrupt-names = "host-wakeup";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
> + max-speed = <1500000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
> + shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> + vbat-supply = <&vcc_3v3_s3>;
> + vddio-supply = <&vcc_1v8_s3>;
> + };
> +};
> +
> +&usb_host0_xhci {
> + dr_mode = "host";
> +};
> +
> +&usbdp_phy0 {
> + rockchip,dp-lane-mux = <0 1>;

You probably also need a definition for your DP to HDMI bridge and the
HDMI type A connector. Do you get image output on the HDMI port, and
does the hotplug work? I don't see you enabling the &dp0 node with its
pinctrl and ports.

It's okay to leave them out in the initial submission if you wish, but
then it's best mentioned in the commit description.

Best regards,
Alexey