[PATCH 8/8] firmware: sysfb: Move CONFIG_FIRMWARE_EDID to firmware options

[Thomas Zimmermann <tzimmermann@suse.de>]

Move the Kconfig option for CONFIG_FIRMWARE_EDID to the firmware
subsystem. The option controls architecture and firmware code, so
it fits here better than in video.

Also make it depend on CONFIG_SYSFB. The EDID data is stored in
sysfb_primary_display and only useful with a sysfb framebuffer. This
further allows for removing an explicit test for CONFIG_FIRMWARE_EDID
from the EFI init code. For loongson, select CONFIG_SYSFB in the
defconfig files.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 arch/loongarch/configs/loongson32_defconfig |  1 +
 arch/loongarch/configs/loongson64_defconfig |  1 +
 drivers/firmware/Kconfig                    | 20 ++++++++++++++++++++
 drivers/firmware/efi/efi-init.c             |  2 +-
 drivers/video/Kconfig                       | 19 -------------------
 5 files changed, 23 insertions(+), 20 deletions(-)

diff --git a/arch/loongarch/configs/loongson32_defconfig b/arch/loongarch/configs/loongson32_defconfig
index 276b1577e0be..1c0897723247 100644
--- a/arch/loongarch/configs/loongson32_defconfig
+++ b/arch/loongarch/configs/loongson32_defconfig
@@ -786,6 +786,7 @@ CONFIG_DRM_VIRTIO_GPU=m
 CONFIG_DRM_LOONGSON=y
 CONFIG_FB=y
 CONFIG_FB_RADEON=y
+CONFIG_SYSFB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
diff --git a/arch/loongarch/configs/loongson64_defconfig b/arch/loongarch/configs/loongson64_defconfig
index a14db1a95e7e..38340537dfd4 100644
--- a/arch/loongarch/configs/loongson64_defconfig
+++ b/arch/loongarch/configs/loongson64_defconfig
@@ -816,6 +816,7 @@ CONFIG_DRM_VIRTIO_GPU=m
 CONFIG_DRM_LOONGSON=y
 CONFIG_FB=y
 CONFIG_FB_RADEON=y
+CONFIG_SYSFB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 52f8253a46b1..edfb171d9eab 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -225,6 +225,26 @@ config SYSFB_SIMPLEFB
 
 	  If unsure, say Y.
 
+config FIRMWARE_EDID
+	bool "Enable firmware EDID"
+	depends on SYSFB
+	depends on EFI_GENERIC_STUB || X86
+	help
+	  This enables access to the EDID transferred from the firmware.
+	  On EFI systems, the EDID comes from the same device as the
+	  primary GOP. On x86 with BIOS, it comes from the VESA BIOS.
+	  DRM display drivers will be able to export the information
+	  to userspace.
+
+	  Also enable this if DDC/I2C transfers do not work for your driver
+	  and if you are using nvidiafb, i810fb or savagefb.
+
+	  In general, choosing Y for this option is safe.  If you
+	  experience extremely long delays while booting before you get
+	  something on your display, try setting this to N.  Matrox cards in
+	  combination with certain motherboards and monitors are known to
+	  suffer from this problem.
+
 config TH1520_AON_PROTOCOL
 	tristate "Always-On firmware protocol"
 	depends on ARCH_THEAD || COMPILE_TEST
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index 002518b642ed..c4088fb8482b 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -60,7 +60,7 @@ extern __weak const efi_config_table_type_t efi_arch_tables[];
  * x86 defines its own instance of sysfb_primary_display and uses
  * it even without EFI, everything else can get them from here.
  */
-#if !defined(CONFIG_X86) && (defined(CONFIG_SYSFB) || defined(CONFIG_FIRMWARE_EDID))
+#if !defined(CONFIG_X86) && defined(CONFIG_SYSFB)
 struct sysfb_display_info sysfb_primary_display __section(".data");
 EXPORT_SYMBOL_GPL(sysfb_primary_display);
 #endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a7144d275f54..1c9ac3b029a7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -62,25 +62,6 @@ config HDMI
 
 endif # HAS_IOMEM
 
-config FIRMWARE_EDID
-	bool "Enable firmware EDID"
-	depends on EFI_GENERIC_STUB || X86
-	help
-	  This enables access to the EDID transferred from the firmware.
-	  On EFI systems, the EDID comes from the same device as the
-	  primary GOP. On x86 with BIOS, it comes from the VESA BIOS.
-	  DRM display drivers will be able to export the information
-	  to userspace.
-
-	  Also enable this if DDC/I2C transfers do not work for your driver
-	  and if you are using nvidiafb, i810fb or savagefb.
-
-	  In general, choosing Y for this option is safe.  If you
-	  experience extremely long delays while booting before you get
-	  something on your display, try setting this to N.  Matrox cards in
-	  combination with certain motherboards and monitors are known to
-	  suffer from this problem.
-
 if VT
 	source "drivers/video/console/Kconfig"
 endif
-- 
2.53.0