[PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[Sherry Sun]

Note: This patch set depends on my previous patch set [1] which adds
Root Port device tree nodes and support parsing the reset property in
new Root Port binding in pci-imx6 driver.

This series integrates the PCI pwrctrl framework into the pci-imx6
driver and updates i.MX EVK board device trees to support it.

Patches 2-8 update device trees for i.MX EVK boards which maintained
by NXP to move power supply properties from the PCIe controller node
to the Root Port child node, which is required for pwrctrl framework.
Affected boards:
- i.MX6Q/DL SABRESD
- i.MX6SX SDB
- i.MX8MM EVK
- i.MX8MP EVK
- i.MX8MQ EVK
- i.MX8DXL/QM/QXP EVK
- i.MX95 15x15/19x19 EVK

The driver maintains legacy regulator handling for device trees that
haven't been updated yet. Both old and new device tree structures are
supported.

[1] https://lore.kernel.org/all/20260318062916.2747472-1-sherry.sun@nxp.com/

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
Changes in V2:
1. After commit 2d8c5098b847 ("PCI/pwrctrl: Do not power off on pwrctrl
   device removal"), the pwrctrl drivers no longer power off devices
   during removal. Update pci-imx6 driver's shutdown callback in patch#1
   to explicitly call pci_pwrctrl_power_off_devices() before 
   pci_pwrctrl_destroy_devices() to ensure devices are properly powered
   off.
---

Sherry Sun (8):
  PCI: imx6: Integrate new pwrctrl API for pci-imx6
  arm: dts: imx6qdl-sabresd: Move power supply property to Root Port
    node
  arm: dts: imx6sx-sdb: Move power supply property to Root Port node
  arm64: dts: imx8mm-evk: Move power supply property to Root Port node
  arm64: dts: imx8mp-evk: Move power supply properties to Root Port node
  arm64: dts: imx8mq-evk: Move power supply properties to Root Port node
  arm64: dts: imx8dxl/qm/qxp: Move power supply properties to Root Port
    node
  arm64: dts: imx95: Move power supply properties to Root Port node

 .../arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi |  2 +-
 arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi     |  2 +-
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi |  2 +-
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts  |  4 ++--
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  |  4 ++--
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  |  4 ++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  4 ++--
 .../boot/dts/freescale/imx95-15x15-evk.dts    |  4 ++--
 .../boot/dts/freescale/imx95-19x19-evk.dts    |  8 +++----
 drivers/pci/controller/dwc/Kconfig            |  1 +
 drivers/pci/controller/dwc/pci-imx6.c         | 24 ++++++++++++++++++-
 12 files changed, 43 insertions(+), 20 deletions(-)

-- 
2.37.1

[PATCH V2 1/8] PCI: imx6: Integrate new pwrctrl API for pci-imx6

[Sherry Sun]

Integrate the PCI pwrctrl framework into the pci-imx6 driver to provide
standardized power management for PCIe devices.

Legacy regulator handling (vpcie-supply at controller level) is
maintained for backward compatibility with existing device trees.
New device trees should specify power supplies at the Root Port
level to utilize the pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 drivers/pci/controller/dwc/Kconfig    |  1 +
 drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index f2fde13107f2..327b0dc65550 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -114,6 +114,7 @@ config PCI_IMX6_HOST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	select PCI_IMX6
+	select PCI_PWRCTRL_GENERIC
 	help
 	  Enables support for the PCIe controller in the i.MX SoCs to
 	  work in Root Complex mode. The PCI controller on i.MX is based
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index b44563309d40..0078cd7bbf9e 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/pci.h>
+#include <linux/pci-pwrctrl.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -1314,6 +1315,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			return ret;
 	}
 
+	/* Legacy regulator handling for DT backward compatibility. */
 	if (imx_pcie->vpcie) {
 		ret = regulator_enable(imx_pcie->vpcie);
 		if (ret) {
@@ -1323,10 +1325,22 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 		}
 	}
 
+	ret = pci_pwrctrl_create_devices(dev);
+	if (ret) {
+		dev_err(dev, "failed to create pwrctrl devices\n");
+		goto err_reg_disable;
+	}
+
+	ret = pci_pwrctrl_power_on_devices(dev);
+	if (ret) {
+		dev_err(dev, "failed to power on pwrctrl devices\n");
+		goto err_pwrctrl_destroy;
+	}
+
 	ret = imx_pcie_clk_enable(imx_pcie);
 	if (ret) {
 		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
-		goto err_reg_disable;
+		goto err_pwrctrl_power_off;
 	}
 
 	if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
@@ -1385,6 +1399,11 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 	phy_exit(imx_pcie->phy);
 err_clk_disable:
 	imx_pcie_clk_disable(imx_pcie);
+err_pwrctrl_power_off:
+	pci_pwrctrl_power_off_devices(dev);
+err_pwrctrl_destroy:
+	if (ret != -EPROBE_DEFER)
+		pci_pwrctrl_destroy_devices(dev);
 err_reg_disable:
 	if (imx_pcie->vpcie)
 		regulator_disable(imx_pcie->vpcie);
@@ -1403,6 +1422,7 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
 	}
 	imx_pcie_clk_disable(imx_pcie);
 
+	pci_pwrctrl_power_off_devices(pci->dev);
 	if (imx_pcie->vpcie)
 		regulator_disable(imx_pcie->vpcie);
 }
@@ -1911,6 +1931,8 @@ static void imx_pcie_shutdown(struct platform_device *pdev)
 	/* bring down link, so bootloader gets clean state in case of reboot */
 	imx_pcie_assert_core_reset(imx_pcie);
 	imx_pcie_assert_perst(imx_pcie, true);
+	pci_pwrctrl_power_off_devices(&pdev->dev);
+	pci_pwrctrl_destroy_devices(&pdev->dev);
 }
 
 static const struct imx_pcie_drvdata drvdata[] = {
-- 
2.37.1

[PATCH V2 2/8] arm: dts: imx6qdl-sabresd: Move power supply property to Root Port node

[Sherry Sun]

Move the vpcie-supply property from the PCIe controller node to the Root
Port child node to support the new PCI pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index fe9046c03ddd..e52205d7c487 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -756,12 +756,12 @@ &pcie {
 	pinctrl-0 = <&pinctrl_pcie>;
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
 &pcie_port0 {
 	reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 };
 
 &pwm1 {
-- 
2.37.1

[PATCH V2 3/8] arm: dts: imx6sx-sdb: Move power supply property to Root Port node

[Sherry Sun]

Move the vpcie-supply property from the PCIe controller node to the Root
Port child node to support the new PCI pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 338de4d144b2..7633ba2139d3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -284,12 +284,12 @@ &pcie {
 	pinctrl-0 = <&pinctrl_pcie>;
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
 	status = "okay";
 };
 
 &pcie_port0 {
 	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
 };
 
 &lcdif1 {
-- 
2.37.1

[PATCH V2 4/8] arm64: dts: imx8mm-evk: Move power supply property to Root Port node

[Sherry Sun]

Move the vpcie-supply property from the PCIe controller node to the Root
Port child node to support the new PCI pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index e03aba825c18..ba7fa0815d13 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -542,7 +542,6 @@ &pcie0 {
 	assigned-clock-rates = <10000000>, <250000000>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
-	vpcie-supply = <&reg_pcie0>;
 	supports-clkreq;
 	status = "okay";
 };
@@ -562,6 +561,7 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
 };
 
 &sai2 {
-- 
2.37.1

[PATCH V2 5/8] arm64: dts: imx8mp-evk: Move power supply properties to Root Port node

[Sherry Sun]

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller node to the Root Port child node to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index a7f3acdc36d1..cb2b820cf3bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -772,8 +772,6 @@ &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie0>;
-	vpcie3v3aux-supply = <&reg_pcie0>;
 	supports-clkreq;
 	status = "disabled";
 };
@@ -786,6 +784,8 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
 };
 
 &pwm1 {
-- 
2.37.1

[PATCH V2 6/8] arm64: dts: imx8mq-evk: Move power supply properties to Root Port node

[Sherry Sun]

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller node to the Root Port child node to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index e7d87ea81b69..75d9b25d1f0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -403,8 +403,6 @@ &pcie1 {
 		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
-	vpcie-supply = <&reg_pcie1>;
-	vpcie3v3aux-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
 	supports-clkreq;
 	status = "okay";
@@ -422,6 +420,8 @@ &pcie1_ep {
 
 &pcie1_port0 {
 	reset-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie1>;
+	vpcie3v3aux-supply = <&reg_pcie1>;
 };
 
 &pgc_gpu {
-- 
2.37.1

[PATCH V2 7/8] arm64: dts: imx8dxl/qm/qxp: Move power supply properties to Root Port node

[Sherry Sun]

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller nodes to the Root Port child nodes to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 4 ++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 39108a915f96..66b2d496b73f 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -677,8 +677,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcieb>;
-	vpcie3v3aux-supply = <&reg_pcieb>;
 	status = "okay";
 };
 
@@ -694,6 +692,8 @@ &pcie0_ep {
 
 &pcieb_port0 {
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	vpcie3v3aux-supply = <&reg_pcieb>;
 };
 
 &sai0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index f706c86137c0..5e725ad8aef9 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -812,14 +812,14 @@ &pciea {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pciea>;
-	vpcie3v3aux-supply = <&reg_pciea>;
 	supports-clkreq;
 	status = "okay";
 };
 
 &pciea_port0 {
 	reset-gpios = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pciea>;
+	vpcie3v3aux-supply = <&reg_pciea>;
 };
 
 &pcieb {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 489e174df4c4..4a4e9bcca9d0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -732,8 +732,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcieb>;
-	vpcie3v3aux-supply = <&reg_pcieb>;
 	supports-clkreq;
 	status = "okay";
 };
@@ -749,6 +747,8 @@ &pcie0_ep {
 
 &pcieb_port0 {
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	vpcie3v3aux-supply = <&reg_pcieb>;
 };
 
 &scu_key {
-- 
2.37.1

[PATCH V2 8/8] arm64: dts: imx95: Move power supply properties to Root Port node

[Sherry Sun]

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller nodes to the Root Port child nodes to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 7d820a0f80b2..0d1cdfd54cce 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -555,8 +555,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_m2_pwr>;
-	vpcie3v3aux-supply = <&reg_m2_pwr>;
 	supports-clkreq;
 	status = "disabled";
 };
@@ -570,6 +568,8 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_pwr>;
+	vpcie3v3aux-supply = <&reg_m2_pwr>;
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 6f193cf04119..77c3a87d9065 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -542,8 +542,6 @@ &pcie0 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie0>;
-	vpcie3v3aux-supply = <&reg_pcie0>;
 	supports-clkreq;
 	status = "okay";
 };
@@ -557,6 +555,8 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
 };
 
 &pcie1 {
@@ -564,8 +564,6 @@ &pcie1 {
 	pinctrl-names = "default";
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_slot_pwr>;
-	vpcie3v3aux-supply = <&reg_slot_pwr>;
 	status = "okay";
 };
 
@@ -578,6 +576,8 @@ &pcie1_ep {
 
 &pcie1_port0 {
 	reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_slot_pwr>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
 };
 
 &sai1 {
-- 
2.37.1

Re: [PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[Manivannan Sadhasivam]

On Thu, Apr 02, 2026 at 06:09:59PM +0800, Sherry Sun wrote:
> Note: This patch set depends on my previous patch set [1] which adds
> Root Port device tree nodes and support parsing the reset property in
> new Root Port binding in pci-imx6 driver.
> 
> This series integrates the PCI pwrctrl framework into the pci-imx6
> driver and updates i.MX EVK board device trees to support it.
> 
> Patches 2-8 update device trees for i.MX EVK boards which maintained
> by NXP to move power supply properties from the PCIe controller node
> to the Root Port child node, which is required for pwrctrl framework.
> Affected boards:
> - i.MX6Q/DL SABRESD
> - i.MX6SX SDB
> - i.MX8MM EVK
> - i.MX8MP EVK
> - i.MX8MQ EVK
> - i.MX8DXL/QM/QXP EVK
> - i.MX95 15x15/19x19 EVK
> 
> The driver maintains legacy regulator handling for device trees that
> haven't been updated yet. Both old and new device tree structures are
> supported.
> 

Thanks for the work! Due to some recently merged patches, this series (Patch 1)
doesn't apply on top of pci/controller/dwc-imx6 branch. Please rebase and
resend!

- Mani

> [1] https://lore.kernel.org/all/20260318062916.2747472-1-sherry.sun@nxp.com/
> 
> Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
> ---
> Changes in V2:
> 1. After commit 2d8c5098b847 ("PCI/pwrctrl: Do not power off on pwrctrl
>    device removal"), the pwrctrl drivers no longer power off devices
>    during removal. Update pci-imx6 driver's shutdown callback in patch#1
>    to explicitly call pci_pwrctrl_power_off_devices() before 
>    pci_pwrctrl_destroy_devices() to ensure devices are properly powered
>    off.
> ---
> 
> Sherry Sun (8):
>   PCI: imx6: Integrate new pwrctrl API for pci-imx6
>   arm: dts: imx6qdl-sabresd: Move power supply property to Root Port
>     node
>   arm: dts: imx6sx-sdb: Move power supply property to Root Port node
>   arm64: dts: imx8mm-evk: Move power supply property to Root Port node
>   arm64: dts: imx8mp-evk: Move power supply properties to Root Port node
>   arm64: dts: imx8mq-evk: Move power supply properties to Root Port node
>   arm64: dts: imx8dxl/qm/qxp: Move power supply properties to Root Port
>     node
>   arm64: dts: imx95: Move power supply properties to Root Port node
> 
>  .../arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi |  2 +-
>  arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi     |  2 +-
>  arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  4 ++--
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi |  2 +-
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts  |  4 ++--
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts  |  4 ++--
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts  |  4 ++--
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  4 ++--
>  .../boot/dts/freescale/imx95-15x15-evk.dts    |  4 ++--
>  .../boot/dts/freescale/imx95-19x19-evk.dts    |  8 +++----
>  drivers/pci/controller/dwc/Kconfig            |  1 +
>  drivers/pci/controller/dwc/pci-imx6.c         | 24 ++++++++++++++++++-
>  12 files changed, 43 insertions(+), 20 deletions(-)
> 
> -- 
> 2.37.1
> 

-- 
மணிவண்ணன் சதாசிவம்

RE: [PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[Sherry Sun]

> Subject: Re: [PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device
> trees
> 
> On Thu, Apr 02, 2026 at 06:09:59PM +0800, Sherry Sun wrote:
> > Note: This patch set depends on my previous patch set [1] which adds
> > Root Port device tree nodes and support parsing the reset property in
> > new Root Port binding in pci-imx6 driver.
> >
> > This series integrates the PCI pwrctrl framework into the pci-imx6
> > driver and updates i.MX EVK board device trees to support it.
> >
> > Patches 2-8 update device trees for i.MX EVK boards which maintained
> > by NXP to move power supply properties from the PCIe controller node
> > to the Root Port child node, which is required for pwrctrl framework.
> > Affected boards:
> > - i.MX6Q/DL SABRESD
> > - i.MX6SX SDB
> > - i.MX8MM EVK
> > - i.MX8MP EVK
> > - i.MX8MQ EVK
> > - i.MX8DXL/QM/QXP EVK
> > - i.MX95 15x15/19x19 EVK
> >
> > The driver maintains legacy regulator handling for device trees that
> > haven't been updated yet. Both old and new device tree structures are
> > supported.
> >
> 
> Thanks for the work! Due to some recently merged patches, this series (Patch
> 1) doesn't apply on top of pci/controller/dwc-imx6 branch. Please rebase and
> resend!
> 
> - Mani

Hi Mani, thanks for the reminder.
Actually this patch set depends on my PERST# patch set [1], which adds
support for Root Port dts nodes and correctly adjusts the sequence of PERST#
assert/deassert and regulator/clock enable in pci-imx6 driver.
I will resend this series once the PERST# patch set been accepted.

[1] https://lore.kernel.org/all/20260410023055.2439146-1-sherry.sun@nxp.com/

Best Regards
Sherry