[PATCH V2 6/8] arm64: dts: imx8mq-evk: Move power supply properties to Root Port node

[Sherry Sun <sherry.sun@nxp.com>]

Move the vpcie-supply and vpcie3v3aux-supply properties from the PCIe
controller node to the Root Port child node to support the new PCI
pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index e7d87ea81b69..75d9b25d1f0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -403,8 +403,6 @@ &pcie1 {
 		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
-	vpcie-supply = <&reg_pcie1>;
-	vpcie3v3aux-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
 	supports-clkreq;
 	status = "okay";
@@ -422,6 +420,8 @@ &pcie1_ep {
 
 &pcie1_port0 {
 	reset-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie1>;
+	vpcie3v3aux-supply = <&reg_pcie1>;
 };
 
 &pgc_gpu {
-- 
2.37.1