[PATCH v4 4/5] PCI: dwc: Use common D3cold eligibility helper in suspend path

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

Previously, the driver skipped putting the link into L2/device state in
D3cold whenever L1 ASPM was enabled, since some devices (e.g. NVMe) expect
low resume latency and may not tolerate deeper power states. However, such
devices typically remain in D0 and are already covered by the new helper's
requirement that all endpoints be in D3hot before the devices under host
bridge may enter D3cold.

So, replace the local L1/L1SS-based check in dw_pcie_suspend_noirq() with
the shared pci_host_common_d3cold_possible() helper to decide whether the
devices under host bridge can safely transition to D3cold.

In addition, propagate PME-from-D3cold capability information from the
helper and record it in skip_pwrctrl_off. Some devices (e.g. M.2 cards
without auxiliary power) may lose PME detection when main power is
removed, even if they advertise PME-from-D3cold support. This allows
controller power-off to be skipped when required to preserve wakeup
functionality.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 11 +++++------
 drivers/pci/controller/dwc/pcie-designware.h      |  1 +
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 6ae6189e9b8a9021c99ece17504834650debd86b..ce3093cfd1608f1616001cbf5f541a4dc3eafea5 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -16,9 +16,11 @@
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/platform_device.h>
 
+#include "../pci-host-common.h"
 #include "../../pci.h"
 #include "pcie-designware.h"
 
@@ -1218,18 +1220,14 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)
 
 int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 {
-	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	bool pme_capable = false;
 	int ret = 0;
 	u32 val;
 
 	if (!dw_pcie_link_up(pci))
 		goto stop_link;
 
-	/*
-	 * If L1SS is supported, then do not put the link into L2 as some
-	 * devices such as NVMe expect low resume latency.
-	 */
-	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
+	if (!pci_host_common_d3cold_possible(pci->pp.bridge, &pme_capable))
 		return 0;
 
 	if (pci->pp.ops->pme_turn_off) {
@@ -1269,6 +1267,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 	udelay(1);
 
 stop_link:
+	pci->pp.skip_pwrctrl_off = pme_capable;
 	dw_pcie_stop_link(pci);
 	if (pci->pp.ops->deinit)
 		pci->pp.ops->deinit(&pci->pp);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index ae6389dd9caa5c27690f998d58729130ea863984..0af083018aee29c1f0f4385dacc6e878c8d040de 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -447,6 +447,7 @@ struct dw_pcie_rp {
 	bool			ecam_enabled;
 	bool			native_ecam;
 	bool                    skip_l23_ready;
+	bool			skip_pwrctrl_off;
 };
 
 struct dw_pcie_ep_ops {

-- 
2.34.1