From: Lukas Timmermann <linux@timmermann.space>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Lukas Timmermann <linux@timmermann.space>,
Alexandre Marquet <tb@a-marquet.fr>
Subject: [PATCH] ARM: dts: exynos: Add bluetooth support to manta
Date: Wed, 08 Apr 2026 13:56:21 +0200 [thread overview]
Message-ID: <20260408-manta-bluetooth-v1-1-b7658e78359a@timmermann.space> (raw)
Enable the bcm4330-bt device for manta boards on serial0.
Also adds the necessary pin definitions and interrupt handling for
wakeup.
Signed-off-by: Lukas Timmermann <linux@timmermann.space>
Co-developed-by: Alexandre Marquet <tb@a-marquet.fr>
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
---
This patch depends on previous patches which are
currently only found in linux-next.
See: https://lore.kernel.org/all/177214038655.341086.4114348823043257597.b4-ty@kernel.org/
---
arch/arm/boot/dts/samsung/exynos5250-manta.dts | 41 +++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/samsung/exynos5250-manta.dts b/arch/arm/boot/dts/samsung/exynos5250-manta.dts
index 24a27b342227..76d3657eb22f 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-manta.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-manta.dts
@@ -461,6 +461,13 @@ acc_int: acc-int-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
+ bt_host_wakeup: bt-host-wakeup-pins {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
@@ -488,6 +495,20 @@ bh1721fvc_reset: bh1721fvc-reset-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
+ bt_reg_on: bt-reg-on-pins {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ bt_wake: bt-wake-pins {
+ samsung,pins = "gph1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
msense_reset: msense-reset-pins {
samsung,pins = "gpg2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -536,7 +557,25 @@ &sd1_cmd {
/* Bluetooth */
&serial_0 {
- status = "disabled";
+ pinctrl-0 = <&uart0_data &uart0_fctl>;
+ pinctrl-names = "default";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+
+ pinctrl-0 = <&bt_reg_on &bt_wake &bt_host_wakeup>;
+ pinctrl-names = "default";
+
+ shutdown-gpios = <&gph0 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gph1 3 GPIO_ACTIVE_HIGH>;
+
+ interrupt-parent = <&gpx2>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wakeup";
+
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "lpo";
+ };
};
/* GPS */
---
base-commit: e5f7e05a699f41275d6380c497293446034bc8af
change-id: 20260404-manta-bluetooth-836133028bb6
Best regards,
--
Lukas Timmermann <linux@timmermann.space>
next reply other threads:[~2026-04-08 11:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-08 11:56 Lukas Timmermann [this message]
2026-04-27 13:49 ` [PATCH] ARM: dts: exynos: Add bluetooth support to manta Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260408-manta-bluetooth-v1-1-b7658e78359a@timmermann.space \
--to=linux@timmermann.space \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tb@a-marquet.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox