[PATCH RFC 02/12] drm/i915/display/intel_lvds: Drop redundant manual cleanup on init failure

[Kory Maincent <kory.maincent@bootlin.com>]

intel_lvds_init() had a goto-based error path that manually called
drm_connector_cleanup(), drm_encoder_cleanup(), kfree() and
intel_connector_free() when no LVDS panel mode could be found.

Once drm_connector_init_with_ddc() and drm_encoder_init() have been
called, the DRM core takes ownership of these objects and will invoke
their .destroy callbacks (intel_connector_destroy and
intel_encoder_destroy) during device teardown. The manual cleanup in
the failed: label is therefore redundant.

Remove it and replace the goto with a simple early return.

Fixes: 79e539453b34e ("DRM: i915: add mode setting support")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

Not tested as I don't have such hardware.
---
 drivers/gpu/drm/i915/display/intel_lvds.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index cc6d4bfcff102..e78a41e2b268c 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -991,8 +991,10 @@ void intel_lvds_init(struct intel_display *display)
 	mutex_unlock(&display->drm->mode_config.mutex);
 
 	/* If we still don't have a mode after all that, give up. */
-	if (!intel_panel_preferred_fixed_mode(connector))
-		goto failed;
+	if (!intel_panel_preferred_fixed_mode(connector)) {
+		drm_dbg_kms(display->drm, "No LVDS modes found, disabling.\n");
+		return;
+	}
 
 	intel_panel_init(connector, drm_edid);
 
@@ -1005,12 +1007,4 @@ void intel_lvds_init(struct intel_display *display)
 	lvds_encoder->a3_power = lvds & LVDS_A3_POWER_MASK;
 
 	return;
-
-failed:
-	drm_dbg_kms(display->drm, "No LVDS modes found, disabling.\n");
-	drm_connector_cleanup(&connector->base);
-	drm_encoder_cleanup(&encoder->base);
-	kfree(lvds_encoder);
-	intel_connector_free(connector);
-	return;
 }

-- 
2.43.0