[PATCH v4 00/11] Input: support for STM FTS5

David Heidelberg via B4 Relay
2026-04-08T22:16:00Z

Used on various phones. Minimal viable driver.

Includes device-tree enabling touchscreen on Pixel 3.

What is missing:
- switching between AP and SLPI mode (to be able to wake up phone by touch)
- firmware loading
- anything above basic touch

Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v4:
- Wrap everything below enabling the supplies into stmfts_configure()
to avoid bunch of gotos to power off on error (Dmitry T.)
- Finished chip specific ops and removed is_fts5. (Dmitry T.)
- Link to v3: https://lore.kernel.org/r/20260403-stmfts5-v3-0-5da768cfd201@ixit.cz

Changes in v3:
- s/touchscreen_pins/touchscreen_irq_n. (Konrad)
- Use interrupts-extended. (Konrad)
- Fixed rebase conflict against 8665ceb926ec ("Input: stmfts - use guard notation when acquiring mutex")
- Rename switch-gpios to mode-switch-gpios.
- Do not define properties in if:then: branches. (Krzysztof)
- Link to v2: https://lore.kernel.org/r/20260315-stmfts5-v2-0-70bc83ee9591@ixit.cz

Changes in v2:
- Fix typo in the binding s/switch-gpio/switch-gpios/.
- Deduplacate allOf. (Rob yamllint)
- Add missing S-off-by. (Dmitry B.)
- Dropped irq-gpios as it's not needed. (Konrad)
- Correct x and y touchscreen area size. (Konrad)
- Correct reset introduction commit description. (Krzysztof)
- Partially implemented chip specific ops. (Dmitry T.)
- Separeted license naming cleanup into separate commit (Dmitry T.)
- Link to v1: https://lore.kernel.org/r/20260301-stmfts5-v1-0-22c458b9ac68@ixit.cz

---
David Heidelberg (7):
Input: stmfts - Fix the MODULE_LICENSE() string
Input: stmfts - Use dev struct directly
Input: stmfts - Switch to devm_regulator_bulk_get_const
Input: stmfts - abstract reading information from the firmware
Input: stmfts - disable regulators when power on fails
dt-bindings: input: touchscreen: st,stmfts: Introduce reset GPIO
dt-bindings: input: touchscreen: st,stmfts: Introduce STM FTS5

Petr Hodina (4):
Input: stmfts - use client to make future code cleaner
Input: stmfts - add optional reset GPIO support
Input: stmfts - support FTS5
arm64: dts: qcom: sdm845-google: Add STM FTS touchscreen support

.../bindings/input/touchscreen/st,stmfts.yaml | 19 +-
.../arm64/boot/dts/qcom/sdm845-google-blueline.dts | 19 +-
arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 2 +-
drivers/input/touchscreen/stmfts.c | 601 +++++++++++++++++++--
4 files changed, 580 insertions(+), 61 deletions(-)
---
base-commit: db7efce4ae23ad5e42f5f55428f529ff62b86fab
change-id: 20260214-stmfts5-b47311fbd732

Best regards,
--
David Heidelberg <david@ixit.cz>