[PATCH 0/2] thermal/drivers/imx: two fixes

[PATCH 0/2] thermal/drivers/imx: two fixes

[Felix Gu]

Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
Felix Gu (2):
      thermal/drivers/imx: Fix thermal zone leak on probe error path
      thermal/drivers/imxl:Fix runtime PM handling on early returns

 drivers/thermal/imx_thermal.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)
---
base-commit: 66672af7a095d89f082c5327f3b15bc2f93d558e
change-id: 20260411-imx-b022791ea1b9

Best regards,
-- 
Felix Gu <ustc.gu@gmail.com>

[PATCH 1/2] thermal/drivers/imx: Fix thermal zone leak on probe error path

[Felix Gu]

If pm_runtime_resume_and_get() fails after the thermal zone has been
registered, the probe error path cleans up runtime PM but skips
thermal_zone_device_unregister(), leaking the thermal zone device.

Move thermal_zone_device_unregister() into disable_runtime_pm so all
failures after thermal zone registration unwind the probe path
correctly.

Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/thermal/imx_thermal.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 38c993d1bcb3..68f9ce41a670 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -727,25 +727,24 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	data->irq_enabled = true;
 	ret = thermal_zone_device_enable(data->tz);
 	if (ret)
-		goto thermal_zone_unregister;
+		goto disable_runtime_pm;
 
 	ret = devm_request_threaded_irq(dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
 			0, "imx_thermal", data);
 	if (ret < 0) {
 		dev_err(dev, "failed to request alarm irq: %d\n", ret);
-		goto thermal_zone_unregister;
+		goto disable_runtime_pm;
 	}
 
 	pm_runtime_put(data->dev);
 
 	return 0;
 
-thermal_zone_unregister:
-	thermal_zone_device_unregister(data->tz);
 disable_runtime_pm:
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
+	thermal_zone_device_unregister(data->tz);
 clk_disable:
 	clk_disable_unprepare(data->thermal_clk);
 legacy_cleanup:

-- 
2.43.0

[PATCH 2/2] thermal/drivers/imxl:Fix runtime PM handling on early returns

[Felix Gu]

Use PM_RUNTIME_ACQUIRE() in imx_get_temp() and imx_set_trip_temp() so
runtime PM references are released correctly even when the functions
return early on errors.

Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/thermal/imx_thermal.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 68f9ce41a670..9d9ae7871068 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -260,8 +260,9 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	u32 val;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(data->dev);
-	if (ret < 0)
+	PM_RUNTIME_ACQUIRE(data->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
 		return ret;
 
 	regmap_read(map, soc_data->temp_data, &val);
@@ -302,8 +303,6 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 		enable_irq(data->irq);
 	}
 
-	pm_runtime_put(data->dev);
-
 	return 0;
 }
 
@@ -337,8 +336,9 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz,
 	struct imx_thermal_data *data = thermal_zone_device_priv(tz);
 	int ret;
 
-	ret = pm_runtime_resume_and_get(data->dev);
-	if (ret < 0)
+	PM_RUNTIME_ACQUIRE(data->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
 		return ret;
 
 	/* do not allow passive to be set higher than critical */
@@ -348,8 +348,6 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz,
 	imx_set_alarm_temp(data, temp);
 	trips[IMX_TRIP_PASSIVE].temperature = temp;
 
-	pm_runtime_put(data->dev);
-
 	return 0;
 }
 

-- 
2.43.0