public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: "Stefan Dösinger" <stefandoesinger@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Linus Walleij <linusw@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Rob Herring <robh@kernel.org>
Subject: [PATCH v3 6/8] ARM: zte: Bring back zx29 UART support
Date: Wed, 15 Apr 2026 00:12:13 +0300	[thread overview]
Message-ID: <20260414211215.152850-7-stefandoesinger@gmail.com> (raw)
In-Reply-To: <20260414211215.152850-1-stefandoesinger@gmail.com>

This is based on code removed in commit 89d4f98ae90d ("ARM: remove zte
zx platform"). I did not bring back the zx29-uart .compatible as the
arm,primecell-periphid does the job.

Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
---
 drivers/tty/serial/amba-pl011.c | 37 +++++++++++++++++++++++++++++++++
 include/linux/amba/bus.h        |  6 ++++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7f17d288c807..858a0edd3e3b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -216,6 +216,38 @@ static struct vendor_data vendor_st = {
 	.get_fifosize		= get_fifosize_st,
 };
 
+static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
+	[REG_DR] = ZX_UART011_DR,
+	[REG_FR] = ZX_UART011_FR,
+	[REG_LCRH_RX] = ZX_UART011_LCRH,
+	[REG_LCRH_TX] = ZX_UART011_LCRH,
+	[REG_IBRD] = ZX_UART011_IBRD,
+	[REG_FBRD] = ZX_UART011_FBRD,
+	[REG_CR] = ZX_UART011_CR,
+	[REG_IFLS] = ZX_UART011_IFLS,
+	[REG_IMSC] = ZX_UART011_IMSC,
+	[REG_RIS] = ZX_UART011_RIS,
+	[REG_MIS] = ZX_UART011_MIS,
+	[REG_ICR] = ZX_UART011_ICR,
+	[REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static unsigned int get_fifosize_zte(struct amba_device *dev)
+{
+	return 16;
+}
+
+static struct vendor_data vendor_zte = {
+	.reg_offset		= pl011_zte_offsets,
+	.access_32b		= true,
+	.ifls			= UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8,
+	.fr_busy		= ZX_UART01x_FR_BUSY,
+	.fr_dsr			= ZX_UART01x_FR_DSR,
+	.fr_cts			= ZX_UART01x_FR_CTS,
+	.fr_ri			= ZX_UART011_FR_RI,
+	.get_fifosize		= get_fifosize_zte,
+};
+
 /* Deals with DMA transactions */
 
 struct pl011_dmabuf {
@@ -3081,6 +3113,11 @@ static const struct amba_id pl011_ids[] = {
 		.mask	= 0x00ffffff,
 		.data	= &vendor_st,
 	},
+	{
+		.id	= AMBA_LINUX_ID(0x00, 0x1, 0xffe),
+		.mask	= 0x00ffffff,
+		.data	= &vendor_zte,
+	},
 	{ 0, 0 },
 };
 
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9946276aff73..854c962d70f5 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -103,8 +103,14 @@ enum amba_vendor {
 	AMBA_VENDOR_ST = 0x80,
 	AMBA_VENDOR_QCOM = 0x51,
 	AMBA_VENDOR_LSI = 0xb6,
+	AMBA_VENDOR_LINUX = 0xfe,	/* This value is not official */
 };
 
+/* This is used to generate pseudo-ID for AMBA device */
+#define AMBA_LINUX_ID(conf, rev, part) \
+	(((conf) & 0xff) << 24 | ((rev) & 0xf) << 20 | \
+	AMBA_VENDOR_LINUX << 12 | ((part) & 0xfff))
+
 extern const struct bus_type amba_bustype;
 
 #define to_amba_device(d)	container_of_const(d, struct amba_device, dev)
-- 
2.52.0



  parent reply	other threads:[~2026-04-14 21:12 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-14 21:12 [PATCH v3 0/8] Add support for ZTE zx297520v3 Stefan Dösinger
2026-04-14 21:12 ` [PATCH v3 1/8] ARM: zte: Add zx297520v3 platform support Stefan Dösinger
2026-04-14 21:12 ` [PATCH v3 2/8] dt-bindings: arm: Add zx297520v3 board binding Stefan Dösinger
2026-04-15  6:45   ` Krzysztof Kozlowski
2026-04-14 21:12 ` [PATCH v3 3/8] ARM: dts: Add D-Link DWR-932M support Stefan Dösinger
2026-04-14 21:12 ` [PATCH v3 4/8] ARM: zte: Add support for zx29 low level debug Stefan Dösinger
2026-04-14 21:12 ` [PATCH v3 5/8] ARM: dts: Add an armv7 timer for zx297520v3 Stefan Dösinger
2026-04-14 21:12 ` Stefan Dösinger [this message]
2026-04-14 21:12 ` [PATCH v3 7/8] ARM: dts: Declare UART1 on zx297520v3 boards Stefan Dösinger
2026-04-14 21:12 ` [PATCH v3 8/8] ARM: defconfig: Add a zx29 defconfig file Stefan Dösinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260414211215.152850-7-stefandoesinger@gmail.com \
    --to=stefandoesinger@gmail.com \
    --cc=arnd@arndb.de \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox