From: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
To: Michael Riesch <michael.riesch@collabora.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Frank Li <Frank.Li@nxp.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Subject: [PATCH 2/5] media: synopsys: Add support for multiple streams
Date: Wed, 15 Apr 2026 11:46:53 +0800 [thread overview]
Message-ID: <20260415-csi2_imx95-v1-2-7d63f3508719@oss.nxp.com> (raw)
In-Reply-To: <20260415-csi2_imx95-v1-0-7d63f3508719@oss.nxp.com>
The current driver only supports single stream operation. Add support
for multiple concurrent streams by tracking enabled streams with a
bitmask and only initializing the hardware once for the first stream.
This enables use cases such as surround view systems where multiple
camera streams need to be processed simultaneously through the same
CSI-2 receiver interface.
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
---
drivers/media/platform/synopsys/dw-mipi-csi2rx.c | 45 ++++++++++++++----------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/media/platform/synopsys/dw-mipi-csi2rx.c b/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
index 46e2a4315ac2..85a2a95bf080 100644
--- a/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
+++ b/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
@@ -113,6 +113,7 @@ struct dw_mipi_csi2rx_device {
enum v4l2_mbus_type bus_type;
u32 lanes_num;
+ u64 enabled_streams;
const struct dw_mipi_csi2rx_drvdata *drvdata;
};
@@ -528,28 +529,31 @@ static int dw_mipi_csi2rx_enable_streams(struct v4l2_subdev *sd,
DW_MIPI_CSI2RX_PAD_SRC,
&streams_mask);
- ret = pm_runtime_resume_and_get(dev);
- if (ret)
- goto err;
+ if (!csi2->enabled_streams) {
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
- ret = dw_mipi_csi2rx_start(csi2);
- if (ret) {
- dev_err(dev, "failed to enable CSI hardware\n");
- goto err_pm_runtime_put;
+ ret = dw_mipi_csi2rx_start(csi2);
+ if (ret) {
+ pm_runtime_put(dev);
+ dev_err(dev, "failed to enable CSI hardware\n");
+ return ret;
+ }
}
ret = v4l2_subdev_enable_streams(remote_sd, remote_pad->index, mask);
- if (ret)
- goto err_csi_stop;
+ if (ret) {
+ if (!csi2->enabled_streams) {
+ dw_mipi_csi2rx_stop(csi2);
+ pm_runtime_put(dev);
+ }
+ return ret;
+ }
- return 0;
+ csi2->enabled_streams |= streams_mask;
-err_csi_stop:
- dw_mipi_csi2rx_stop(csi2);
-err_pm_runtime_put:
- pm_runtime_put(dev);
-err:
- return ret;
+ return 0;
}
static int dw_mipi_csi2rx_disable_streams(struct v4l2_subdev *sd,
@@ -572,10 +576,15 @@ static int dw_mipi_csi2rx_disable_streams(struct v4l2_subdev *sd,
&streams_mask);
ret = v4l2_subdev_disable_streams(remote_sd, remote_pad->index, mask);
+ if (ret)
+ dev_err(dev, "failed to disable streams on remote subdev: %d\n", ret);
- dw_mipi_csi2rx_stop(csi2);
+ csi2->enabled_streams &= ~streams_mask;
- pm_runtime_put(dev);
+ if (!csi2->enabled_streams) {
+ dw_mipi_csi2rx_stop(csi2);
+ pm_runtime_put(dev);
+ }
return ret;
}
--
2.34.1
next prev parent reply other threads:[~2026-04-15 3:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-15 3:46 [PATCH 0/5] media: synopsys: enhancements and i.MX95 support Guoniu Zhou
2026-04-15 3:46 ` [PATCH 1/5] media: synopsys: Add support for RAW16 Bayer formats Guoniu Zhou
2026-04-17 8:31 ` Frank Li
2026-04-15 3:46 ` Guoniu Zhou [this message]
2026-04-17 8:38 ` [PATCH 2/5] media: synopsys: Add support for multiple streams Frank Li
2026-04-15 3:46 ` [PATCH 3/5] media: synopsys: Add PHY stopstate wait for i.MX93 Guoniu Zhou
2026-04-17 8:51 ` Frank Li
2026-04-15 3:46 ` [PATCH 4/5] media: dt-bindings: add NXP i.MX95 compatible string Guoniu Zhou
2026-04-15 8:10 ` Krzysztof Kozlowski
2026-04-15 9:21 ` G.N. Zhou (OSS)
2026-04-17 10:30 ` Frank Li
2026-04-15 3:46 ` [PATCH 5/5] media: synopsys: Add support for i.MX95 Guoniu Zhou
2026-04-17 9:45 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260415-csi2_imx95-v1-2-7d63f3508719@oss.nxp.com \
--to=guoniu.zhou@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=michael.riesch@collabora.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox