[PATCH net,v3 1/1] net: stmmac: Update default_an_inband before passing value to phylink_config

[KhaiWenTan <khai.wen.tan@intel.com>]

From: KhaiWenTan <khai.wen.tan@linux.intel.com>

get_interfaces() will update both the plat->phy_interfaces and
mdio_bus_data->default_an_inband based on reading a SERDES register. As
get_interfaces() will be called after default_an_inband had already been
read, dwmac-intel regressed as a result with incorrect default_an_inband
value in phylink_config.

Therefore, we moved the priv->plat->get_interfaces() to be executed first
before assigning priv->plat->default_an_inband to config->default_an_inband
to ensure default_an_inband is in correct value.

Fixes: d3836052fe09 ("net: stmmac: intel: convert speed_mode_2500() to get_interfaces()")
Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
v3:
  - rebase on the latest net tree (Paolo Abeni)

v2: https://patchwork.kernel.org/project/netdevbpf/patch/20260413020339.68426-1-khai.wen.tan@linux.intel.com/
  - update commit message for better understanding (Russell King)
  - corrected the blamed commit (Russell King)

v1: https://patchwork.kernel.org/project/netdevbpf/patch/20260410020735.327590-1-khai.wen.tan@linux.intel.com/
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 01a983001ab4..ca68248dbc78 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1410,8 +1410,6 @@ static int stmmac_phylink_setup(struct stmmac_priv *priv)
 	priv->tx_lpi_clk_stop = priv->plat->flags &
 				STMMAC_FLAG_EN_TX_LPI_CLOCKGATING;
 
-	config->default_an_inband = priv->plat->default_an_inband;
-
 	/* Get the PHY interface modes (at the PHY end of the link) that
 	 * are supported by the platform.
 	 */
@@ -1419,6 +1417,8 @@ static int stmmac_phylink_setup(struct stmmac_priv *priv)
 		priv->plat->get_interfaces(priv, priv->plat->bsp_priv,
 					   config->supported_interfaces);
 
+	config->default_an_inband = priv->plat->default_an_inband;
+
 	/* Set the platform/firmware specified interface mode if the
 	 * supported interfaces have not already been provided using
 	 * phy_interface as a last resort.
-- 
2.43.0