[PATCH v2 2/7] media: synopsys: Fix IPI using hardcoded datatype

[Guoniu Zhou <guoniu.zhou@oss.nxp.com>]

The imx93_csi2rx_dphy_ipi_enable() function configures the IPI datatype
using csi2->formats->csi_dt, which is initialized during probe but never
updated in set_fmt(). This causes the IPI to always use the probe-time
default datatype, ignoring the actual media bus format negotiated at
runtime. When userspace requests a different format, the IPI hardware is
configured with the wrong datatype, resulting in incorrect image output.

Fix by updating csi2->formats in the set_fmt callback to reflect the
currently negotiated format, ensuring the IPI configuration matches the
runtime datatype.

Fixes: ec40b431f0ab ("media: synopsys: csi2rx: add i.MX93 support")
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
---
Changes in v2:
- New added in v2
---
 drivers/media/platform/synopsys/dw-mipi-csi2rx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/synopsys/dw-mipi-csi2rx.c b/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
index 02eb4a6cafad..b3f90da8b43c 100644
--- a/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
+++ b/drivers/media/platform/synopsys/dw-mipi-csi2rx.c
@@ -470,6 +470,11 @@ static int dw_mipi_csi2rx_set_fmt(struct v4l2_subdev *sd,
 
 	*src = *sink;
 
+	/* Store the CSIS format descriptor for active formats. */
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		csi2->formats = fmt ? :
+			dw_mipi_csi2rx_find_format(csi2, default_format.code);
+
 	return 0;
 }
 

-- 
2.34.1