[PATCH v3 16/20] drm/mode-config: Create drm_mode_config_create_initial_state()

[Maxime Ripard <mripard@kernel.org>]

drm_mode_config_reset() can be used to create the initial state, but
also to return to the initial state, when doing a suspend/resume cycle
for example.

It also affects both the software and the hardware, and drivers can
choose to reset the hardware as well. Most will just create an empty
state and the synchronisation between hardware and software states will
effectively be done when the first commit is done.

That dual role can be harmful, since some objects do need to be
initialized but also need to be preserved across a suspend/resume cycle.
drm_private_obj are such objects for example.

Thus, create another helper for drivers to call to initialize their
state when the driver is loaded, so we can make
drm_mode_config_reset() only about handling suspend/resume and similar.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
---
 drivers/gpu/drm/drm_atomic.c      | 12 +++++-
 drivers/gpu/drm/drm_mode_config.c | 87 +++++++++++++++++++++++++++++++++++++++
 include/drm/drm_mode_config.h     |  1 +
 3 files changed, 98 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 253a00f450b0..f31b6147e682 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -59,12 +59,20 @@
  * when preparing the update and kept alive as long as they are active
  * in the device.
  *
  * Their respective lifetimes are:
  *
- * - at reset time, the object reset implementation will allocate a new
- *   default state and will store it in the object state pointer.
+ * - at driver initialization time, the driver will allocate an initial,
+ *   pristine, state and will store it using
+ *   drm_mode_config_create_initial_state(). Historically, this was one
+ *   of drm_mode_config_reset() job, so one might still encounter it in
+ *   a driver.
+ *
+ * - at reset time, for example during suspend/resume,
+ *   drm_mode_config_reset() will reset the software and hardware state
+ *   to a known default and will store it in the object's state pointer.
+ *   Not all objects are affected by drm_mode_config_reset() though.
  *
  * - whenever a new update is needed:
  *
  *   + A new &struct drm_atomic_state is allocated using
  *     drm_atomic_state_alloc().
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 92ff907f2485..a43eb825671b 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -21,10 +21,11 @@
  */
 
 #include <linux/export.h>
 #include <linux/uaccess.h>
 
+#include <drm/drm_atomic.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_file.h>
 #include <drm/drm_framebuffer.h>
 #include <drm/drm_managed.h>
@@ -281,10 +282,96 @@ void drm_mode_config_reset(struct drm_device *dev)
 	}
 	drm_connector_list_iter_end(&conn_iter);
 }
 EXPORT_SYMBOL(drm_mode_config_reset);
 
+/**
+ * drm_mode_config_create_initial_state - Allocates the initial state
+ * @dev: drm device
+ *
+ * This functions creates the initial state for all the objects. Drivers
+ * can use this in e.g. probe to initialize their software state.
+ *
+ * It has two main differences with drm_mode_config_reset(): the reset()
+ * hooks aren't called and thus the hardware will be left untouched, but
+ * also the &drm_private_obj structures will be initialized as opposed
+ * to drm_mode_config_reset() that skips them.
+ *
+ * Returns: 0 on success, negative error value on failure.
+ */
+int drm_mode_config_create_initial_state(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct drm_colorop *colorop;
+	struct drm_plane *plane;
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+	struct drm_private_obj *privobj;
+	int ret;
+
+	drm_for_each_privobj(privobj, dev) {
+		struct drm_private_state *privobj_state;
+
+		if (privobj->state)
+			continue;
+
+		if (!privobj->funcs->atomic_create_state)
+			continue;
+
+		privobj_state = privobj->funcs->atomic_create_state(privobj);
+		if (IS_ERR(privobj_state))
+			return PTR_ERR(privobj_state);
+
+		privobj->state = privobj_state;
+	}
+
+	drm_for_each_colorop(colorop, dev) {
+		struct drm_colorop_state *colorop_state;
+
+		if (colorop->state)
+			continue;
+
+		colorop_state = drm_atomic_helper_colorop_create_state(colorop);
+		if (IS_ERR(colorop_state))
+			return PTR_ERR(colorop_state);
+
+		colorop->state = colorop_state;
+	}
+
+	drm_for_each_plane(plane, dev) {
+		if (plane->state)
+			continue;
+
+		ret = drm_mode_config_plane_create_state(plane);
+		if (ret)
+			return ret;
+	}
+
+	drm_for_each_crtc(crtc, dev) {
+		if (crtc->state)
+			continue;
+
+		ret = drm_mode_config_crtc_create_state(crtc);
+		if (ret)
+			return ret;
+	}
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		if (connector->state)
+			continue;
+
+		ret = drm_mode_config_connector_create_state(connector);
+		if (ret)
+			return ret;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_config_create_initial_state);
+
 /*
  * Global properties
  */
 static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
 	{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 687c0ee163d2..00009250fde4 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -1005,9 +1005,10 @@ int __must_check drmm_mode_config_init(struct drm_device *dev);
 static inline int drm_mode_config_init(struct drm_device *dev)
 {
 	return drmm_mode_config_init(dev);
 }
 
+int drm_mode_config_create_initial_state(struct drm_device *dev);
 void drm_mode_config_reset(struct drm_device *dev);
 void drm_mode_config_cleanup(struct drm_device *dev);
 
 #endif

-- 
2.53.0