[PATCH 1/1] scsi: ufs: remove ucd_rsp_dma_addr and ucd_prdt_dma_addr from ufshcd_lrb

[<ed.tsai@mediatek.com>]

From: Ed Tsai <ed.tsai@mediatek.com>

The offsets stored in utp_transfer_req_desc are in double words on
hosts without UFSHCD_QUIRK_PRDT_BYTE_GRAN, using them directly to
compute ucd_rsp_dma_addr and ucd_prdt_dma_addr results in incorrect
DMA addresses.

Since these fields are only used for error logging, remove them from
struct ufshcd_lrb and compute directly in ufshcd_print_tr() using
offsetof(struct utp_transfer_cmd_desc, ...) instead.

Fixes: d5130c5a0932 ("scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20260424063603.382328-2-ed.tsai@mediatek.com/
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
---
 drivers/ufs/core/ufshcd.c | 10 ++++------
 include/ufs/ufshcd.h      |  4 ----
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 4805e40ed4d7..02fa61322e77 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -621,7 +621,8 @@ static void ufshcd_print_tr(struct ufs_hba *hba, struct scsi_cmnd *cmd,
 	ufshcd_hex_dump("UPIU REQ: ", lrbp->ucd_req_ptr,
 			sizeof(struct utp_upiu_req));
 	dev_err(hba->dev, "UPIU[%d] - Response UPIU phys@0x%llx\n", tag,
-		(u64)lrbp->ucd_rsp_dma_addr);
+		(u64)(lrbp->ucd_req_dma_addr +
+		offsetof(struct utp_transfer_cmd_desc, response_upiu)));
 	ufshcd_hex_dump("UPIU RSP: ", lrbp->ucd_rsp_ptr,
 			sizeof(struct utp_upiu_rsp));
 
@@ -633,7 +634,8 @@ static void ufshcd_print_tr(struct ufs_hba *hba, struct scsi_cmnd *cmd,
 	dev_err(hba->dev,
 		"UPIU[%d] - PRDT - %d entries  phys@0x%llx\n",
 		tag, prdt_length,
-		(u64)lrbp->ucd_prdt_dma_addr);
+		(u64)(lrbp->ucd_req_dma_addr +
+		offsetof(struct utp_transfer_cmd_desc, prd_table)));
 
 	if (pr_prdt)
 		ufshcd_hex_dump("UPIU PRDT: ", lrbp->ucd_prdt_ptr,
@@ -2971,8 +2973,6 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct scsi_cmnd *cmd)
 	struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr;
 	dma_addr_t cmd_desc_element_addr =
 		hba->ucdl_dma_addr + i * ufshcd_get_ucd_size(hba);
-	u16 response_offset = le16_to_cpu(utrdlp[i].response_upiu_offset);
-	u16 prdt_offset = le16_to_cpu(utrdlp[i].prd_table_offset);
 	struct ufshcd_lrb *lrb = scsi_cmd_priv(cmd);
 
 	lrb->utr_descriptor_ptr = utrdlp + i;
@@ -2981,9 +2981,7 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct scsi_cmnd *cmd)
 	lrb->ucd_req_ptr = (struct utp_upiu_req *)cmd_descp->command_upiu;
 	lrb->ucd_req_dma_addr = cmd_desc_element_addr;
 	lrb->ucd_rsp_ptr = (struct utp_upiu_rsp *)cmd_descp->response_upiu;
-	lrb->ucd_rsp_dma_addr = cmd_desc_element_addr + response_offset;
 	lrb->ucd_prdt_ptr = (struct ufshcd_sg_entry *)cmd_descp->prd_table;
-	lrb->ucd_prdt_dma_addr = cmd_desc_element_addr + prdt_offset;
 }
 
 static void __ufshcd_setup_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd,
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index cfbc75d8df83..8cb845534e63 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -158,8 +158,6 @@ struct ufs_pm_lvl_states {
  * @ucd_rsp_ptr: Response UPIU address for this command
  * @ucd_prdt_ptr: PRDT address of the command
  * @utrd_dma_addr: UTRD dma address for debug
- * @ucd_prdt_dma_addr: PRDT dma address for debug
- * @ucd_rsp_dma_addr: UPIU response dma address for debug
  * @ucd_req_dma_addr: UPIU request dma address for debug
  * @scsi_status: SCSI status of the command
  * @command_type: SCSI, UFS, Query.
@@ -182,8 +180,6 @@ struct ufshcd_lrb {
 
 	dma_addr_t utrd_dma_addr;
 	dma_addr_t ucd_req_dma_addr;
-	dma_addr_t ucd_rsp_dma_addr;
-	dma_addr_t ucd_prdt_dma_addr;
 
 	int scsi_status;
 
-- 
2.45.2