From: Mohamed Ayman <mohamedaymanworkspace@gmail.com>
To: Linus Walleij <linusw@kernel.org>, Imre Kaloz <kaloz@openwrt.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated list:ARM/INTEL
IXP4XX ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: Mohamed Ayman <mohamedaymanworkspace@gmail.com>,
linux-arm-kernel@lists.infradead.org (moderated list:ARM/INTEL
IXP4XX ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ARM: dts: ixp4xx: use phandle-based GPIOs in mi424wr
Date: Tue, 28 Apr 2026 22:10:28 +0300 [thread overview]
Message-ID: <20260428191029.809462-1-mohamedaymanworkspace@gmail.com> (raw)
Convert remaining legacy integer GPIO specifiers to phandle-based
descriptors in intel-ixp42x-actiontec-mi424wr.dtsi.
All other GPIOs in this file already use &gpio0/&gpio1. These are the
last remaining legacy users in the IXP4xx DTS files.
Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com>
---
.../boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
index 9b54e3c01a34..3043ae7232dd 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -195,19 +195,19 @@ gpio1: gpio@1,0 {
pci-reset-hog {
gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PCI reset";
};
pstn-relay-hog-1 {
gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "PSTN relay control 1";
};
pstn-relay-hog-2 {
gpio-hog;
- gpios = <12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "PSTN relay control 2";
};
--
2.34.1
next reply other threads:[~2026-04-28 19:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 19:10 Mohamed Ayman [this message]
2026-05-05 9:36 ` [PATCH] ARM: dts: ixp4xx: use phandle-based GPIOs in mi424wr Linus Walleij
-- strict thread matches above, loose matches on Subject: below --
2026-05-05 9:36 Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428191029.809462-1-mohamedaymanworkspace@gmail.com \
--to=mohamedaymanworkspace@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kaloz@openwrt.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox