From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: "Jingoo Han" <jingoohan1@gmail.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Will Deacon" <will@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, jonathanh@nvidia.com,
bjorn.andersson@oss.qualcomm.com,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Subject: [PATCH v5 2/5] PCI: qcom: Add .get_ltssm() helper
Date: Wed, 29 Apr 2026 12:12:24 +0530 [thread overview]
Message-ID: <20260429-d3cold-v5-2-89e9735b9df6@oss.qualcomm.com> (raw)
In-Reply-To: <20260429-d3cold-v5-0-89e9735b9df6@oss.qualcomm.com>
For older targets like sc7280, we see reading DBI after sending PME
turn off message is causing NOC error.
To avoid unsafe DBI accesses, introduce qcom_pcie_get_ltssm() to retrieve
the LTSSM state. For newer platforms, the LTSSM state is read from the
PARF_LTSSM register, while older platforms continue to retrieve it from
ELBI_SYS_STTS.
This helper is used in place of direct DBI-based link state checks in
the D3cold path after sending PME turn-off message, ensuring the LTSSM
state can be queried safely even after DBI access is no longer valid.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index af6bf5cce65b..085300c1d1ec 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -71,6 +71,7 @@
/* ELBI registers */
#define ELBI_SYS_CTRL 0x04
+#define ELBI_SYS_STTS 0x08
/* DBI registers */
#define AXI_MSTR_RESP_COMP_CTRL0 0x818
@@ -131,6 +132,7 @@
/* PARF_LTSSM register fields */
#define LTSSM_EN BIT(8)
+#define PARF_LTSSM_STATE_MASK GENMASK(5, 0)
/* PARF_NO_SNOOP_OVERRIDE register fields */
#define WR_NO_SNOOP_OVERRIDE_EN BIT(1)
@@ -145,6 +147,9 @@
/* ELBI_SYS_CTRL register fields */
#define ELBI_SYS_CTRL_LT_ENABLE BIT(0)
+/* ELBI_SYS_STTS register fields */
+#define ELBI_SYS_STTS_LTSSM_STATE_MASK GENMASK(17, 12)
+
/* AXI_MSTR_RESP_COMP_CTRL0 register fields */
#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4
#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5
@@ -245,6 +250,7 @@ struct qcom_pcie_ops {
void (*deinit)(struct qcom_pcie *pcie);
void (*ltssm_enable)(struct qcom_pcie *pcie);
int (*config_sid)(struct qcom_pcie *pcie);
+ enum dw_pcie_ltssm (*get_ltssm)(struct qcom_pcie *pcie);
};
/**
@@ -428,6 +434,15 @@ static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
writel(val, pci->elbi_base + ELBI_SYS_CTRL);
}
+static enum dw_pcie_ltssm qcom_pcie_2_1_0_get_ltssm(struct qcom_pcie *pcie)
+{
+ struct dw_pcie *pci = pcie->pci;
+ u32 val;
+
+ val = readl(pci->elbi_base + ELBI_SYS_STTS);
+ return (enum dw_pcie_ltssm)FIELD_GET(ELBI_SYS_STTS_LTSSM_STATE_MASK, val);
+}
+
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
@@ -1260,6 +1275,19 @@ static bool qcom_pcie_link_up(struct dw_pcie *pci)
return val & PCI_EXP_LNKSTA_DLLLA;
}
+static enum dw_pcie_ltssm qcom_pcie_get_ltssm(struct dw_pcie *pci)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pci);
+ u32 val;
+
+ if (pcie->cfg->ops->ltssm_enable)
+ return pcie->cfg->ops->get_ltssm(pcie);
+
+ val = readl(pcie->parf + PARF_LTSSM);
+
+ return (enum dw_pcie_ltssm)FIELD_GET(PARF_LTSSM_STATE_MASK, val);
+}
+
static void qcom_pcie_phy_power_off(struct qcom_pcie *pcie)
{
struct qcom_pcie_port *port;
@@ -1385,6 +1413,7 @@ static const struct qcom_pcie_ops ops_2_1_0 = {
.post_init = qcom_pcie_post_init_2_1_0,
.deinit = qcom_pcie_deinit_2_1_0,
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
+ .get_ltssm = qcom_pcie_2_1_0_get_ltssm,
};
/* Qcom IP rev.: 1.0.0 Synopsys IP rev.: 4.11a */
@@ -1394,6 +1423,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
.post_init = qcom_pcie_post_init_1_0_0,
.deinit = qcom_pcie_deinit_1_0_0,
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
+ .get_ltssm = qcom_pcie_2_1_0_get_ltssm,
};
/* Qcom IP rev.: 2.3.2 Synopsys IP rev.: 4.21a */
@@ -1512,6 +1542,7 @@ static const struct qcom_pcie_cfg cfg_fw_managed = {
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = qcom_pcie_link_up,
.start_link = qcom_pcie_start_link,
+ .get_ltssm = qcom_pcie_get_ltssm,
};
static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
--
2.34.1
next prev parent reply other threads:[~2026-04-29 6:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 6:42 [PATCH v5 0/5] PCI: qcom: Add D3cold support Krishna Chaitanya Chundru
2026-04-29 6:42 ` [PATCH v5 1/5] PCI: host-common: Add helper to determine host bridge D3cold eligibility Krishna Chaitanya Chundru
2026-04-29 6:42 ` Krishna Chaitanya Chundru [this message]
2026-04-29 6:42 ` [PATCH v5 3/5] PCI: qcom: Power down PHY via PARF_PHY_CTRL before disabling rails/clocks Krishna Chaitanya Chundru
2026-04-29 6:42 ` [PATCH v5 4/5] PCI: dwc: Use common D3cold eligibility helper in suspend path Krishna Chaitanya Chundru
2026-04-29 6:42 ` [PATCH v5 5/5] PCI: qcom: Add D3cold support Krishna Chaitanya Chundru
2026-05-03 20:30 ` Steev Klimaszewski
2026-05-04 3:37 ` Krishna Chaitanya Chundru
2026-05-04 4:14 ` Steev Klimaszewski
2026-05-04 7:06 ` Krishna Chaitanya Chundru
2026-05-04 14:16 ` Steev Klimaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260429-d3cold-v5-2-89e9735b9df6@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox