[PATCH v3 1/4] ARM: pxa: statify platform device definitions in spitz board file

[Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>]

The scoop devices are not used outside of this board file so make them
static.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 arch/arm/mach-pxa/spitz.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c0b1f7e6be87411359b0020257ff12c73bbcbae3..3284b9f62be970555042a7292993e45d56fde47e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -165,7 +165,7 @@ static struct scoop_config spitz_scoop_1_setup = {
 	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
-struct platform_device spitz_scoop_1_device = {
+static struct platform_device spitz_scoop_1_device = {
 	.name		= "sharp-scoop",
 	.id		= 0,
 	.dev		= {
@@ -192,7 +192,7 @@ static struct scoop_config spitz_scoop_2_setup = {
 	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
-struct platform_device spitz_scoop_2_device = {
+static struct platform_device spitz_scoop_2_device = {
 	.name		= "sharp-scoop",
 	.id		= 1,
 	.dev		= {

-- 
2.47.3