[PATCH 3/6] usb: dwc3: dwc3-octeon: Use FIELD_MODIFY()

[Hans Zhang <18255117159@163.com>]

Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.

Signed-off-by: Hans Zhang <18255117159@163.com>
---
 drivers/usb/dwc3/dwc3-octeon.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
index 42bfc14ae0c4..2201f0f34abb 100644
--- a/drivers/usb/dwc3/dwc3-octeon.c
+++ b/drivers/usb/dwc3/dwc3-octeon.c
@@ -296,8 +296,7 @@ static int dwc3_octeon_setup(struct dwc3_octeon *octeon,
 		return div;
 	}
 	val = dwc3_octeon_readq(uctl_ctl_reg);
-	val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL;
-	val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div);
+	FIELD_MODIFY(USBDRD_UCTL_CTL_H_CLKDIV_SEL, &val, div);
 	val |= USBDRD_UCTL_CTL_H_CLK_EN;
 	dwc3_octeon_writeq(uctl_ctl_reg, val);
 	val = dwc3_octeon_readq(uctl_ctl_reg);
@@ -314,14 +313,11 @@ static int dwc3_octeon_setup(struct dwc3_octeon *octeon,
 	/* Step 5a: Reference clock configuration. */
 	val = dwc3_octeon_readq(uctl_ctl_reg);
 	val &= ~USBDRD_UCTL_CTL_REF_CLK_DIV2;
-	val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL;
-	val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
+	FIELD_MODIFY(USBDRD_UCTL_CTL_REF_CLK_SEL, &val, ref_clk_sel);
 
-	val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL;
-	val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel);
+	FIELD_MODIFY(USBDRD_UCTL_CTL_REF_CLK_FSEL, &val, ref_clk_fsel);
 
-	val &= ~USBDRD_UCTL_CTL_MPLL_MULTIPLIER;
-	val |= FIELD_PREP(USBDRD_UCTL_CTL_MPLL_MULTIPLIER, mpll_mul);
+	FIELD_MODIFY(USBDRD_UCTL_CTL_MPLL_MULTIPLIER, &val, mpll_mul);
 
 	/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
 	val |= USBDRD_UCTL_CTL_SSC_EN;
-- 
2.34.1