Re: [PATCH 2/2] arm64: dts: ti: Add k3-am62l3-beaglebadge

[Bryan Brattlof <bb@ti.com>]

On May  1, 2026 thus sayeth Judith Mendez:
> BeagleBoard.org BeagleBadge is a compact, affordable open source
> hardware single board computer based on the Texas Instruments AM62L3
> SoC designed for IoT and embedded applications with low power consumption.
> Expansion is provided over open standards based headers including
> QWIIC and GPIO interfaces.
> 
> https://beagleboard.org/
> https://github.com/beagleboard/BeagleBadge
> 
> Co-developed-by: Andrew Davis <afd@ti.com>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile            |   1 +
>  arch/arm64/boot/dts/ti/k3-am62l3-badge.dts | 655 +++++++++++++++++++++

...

> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-badge.dts 
> b/arch/arm64/boot/dts/ti/k3-am62l3-badge.dts
> new file mode 100644
> index 000000000000..0125d3fec5e9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-badge.dts
> @@ -0,0 +1,655 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * https://www.beagleboard.org/boards/beaglebadge
> + *
> + * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "k3-am62l3.dtsi"
> +#include "k3-pinctrl.h"
> +
> +/ {
> +	compatible = "beagle,am62l3-badge", "ti,am62l3";

I noticed the $subject calls it the k3-am62l3-beaglebadge do we want to 
name the DT that as well?

> +	model = "BeagleBoard.org BeagleBadge";
> +

...

> +&sdhci2 {
> +	vmmc-supply = <&wlan_en>;
> +	bus-width = <4>;
> +	non-removable;
> +	cap-power-off-card;
> +	keep-power-in-suspend;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_pins_default>;
> +	ti,driver-strength-ohm = <50>;
> +	ti,fails-without-test-cd;
> +	status = "okay";
> +
> +	wlcore: wlcore@2 {
> +		compatible = "ti,cc3300";

Sadly this only exists on our evil vendor tree :/

> +		reg = <2>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <52 IRQ_TYPE_EDGE_RISING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wlirq_pins_default>;
> +	};
> +};
> +

Scanning over the bootlog it looks like the VTM driver is active but 
we're missing the thermal-zones{} node which is causing it issues.

~Bryan